[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250627214821.GA195510-robh@kernel.org>
Date: Fri, 27 Jun 2025 16:48:21 -0500
From: Rob Herring <robh@...nel.org>
To: Christian Marangi <ansuelsmth@...il.com>
Cc: Lee Jones <lee@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Vladimir Oltean <olteanv@...il.com>,
Srinivas Kandagatla <srini@...nel.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"Chester A. Unal" <chester.a.unal@...nc9.com>,
Daniel Golle <daniel@...rotopia.org>,
DENG Qingfang <dqfext@...il.com>,
Sean Wang <sean.wang@...iatek.com>, Simon Horman <horms@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [net-next PATCH v15 05/12] dt-bindings: mfd: Document support
for Airoha AN8855 Switch SoC
On Thu, Jun 26, 2025 at 11:23:04PM +0200, Christian Marangi wrote:
> Document support for Airoha AN8855 Switch SoC. This SoC expose various
> peripherals like an Ethernet Switch, a NVMEM provider and Ethernet PHYs.
>
> It does also support i2c and timers but those are not currently
> supported/used.
>
> Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
> ---
> .../bindings/mfd/airoha,an8855.yaml | 175 ++++++++++++++++++
> 1 file changed, 175 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/airoha,an8855.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/airoha,an8855.yaml b/Documentation/devicetree/bindings/mfd/airoha,an8855.yaml
> new file mode 100644
> index 000000000000..a683db4f41d1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/airoha,an8855.yaml
> @@ -0,0 +1,175 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/airoha,an8855.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha AN8855 Switch SoC
> +
> +maintainers:
> + - Christian Marangi <ansuelsmth@...il.com>
> +
> +description: >
> + Airoha AN8855 Switch is a SoC that expose various peripherals like an
> + Ethernet Switch, a NVMEM provider and Ethernet PHYs.
> +
> + It does also support i2c and timers but those are not currently
> + supported/used.
> +
> +properties:
> + compatible:
> + const: airoha,an8855
> +
> + reg:
> + maxItems: 1
> +
> + reset-gpios: true
> +
> + efuse:
> + type: object
> + $ref: /schemas/nvmem/airoha,an8855-efuse.yaml
> + description: EFUSE exposed by the Airoha AN8855 SoC
> +
> + ethernet-switch:
> + type: object
> + $ref: /schemas/net/dsa/airoha,an8855-switch.yaml
> + description: Switch exposed by the Airoha AN8855 SoC
> +
> + mdio:
> + type: object
> + $ref: /schemas/net/airoha,an8855-mdio.yaml
> + description: MDIO exposed by the Airoha AN8855 SoC
> +
> +required:
> + - compatible
> + - reg
> + - mdio
> + - ethernet-switch
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + soc@1 {
> + compatible = "airoha,an8855";
> + reg = <1>;
> +
> + reset-gpios = <&pio 39 0>;
> +
> + efuse {
> + compatible = "airoha,an8855-efuse";
> +
> + #nvmem-cell-cells = <0>;
> +
> + nvmem-layout {
> + compatible = "fixed-layout";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + shift_sel_port0_tx_a: shift-sel-port0-tx-a@c {
> + reg = <0xc 0x4>;
> + };
> +
> + shift_sel_port0_tx_b: shift-sel-port0-tx-b@10 {
> + reg = <0x10 0x4>;
> + };
> +
> + shift_sel_port0_tx_c: shift-sel-port0-tx-c@14 {
> + reg = <0x14 0x4>;
> + };
> +
> + shift_sel_port0_tx_d: shift-sel-port0-tx-d@18 {
> + reg = <0x18 0x4>;
> + };
> +
> + shift_sel_port1_tx_a: shift-sel-port1-tx-a@1c {
> + reg = <0x1c 0x4>;
> + };
> +
> + shift_sel_port1_tx_b: shift-sel-port1-tx-b@20 {
> + reg = <0x20 0x4>;
> + };
> +
> + shift_sel_port1_tx_c: shift-sel-port1-tx-c@24 {
> + reg = <0x24 0x4>;
> + };
> +
> + shift_sel_port1_tx_d: shift-sel-port1-tx-d@28 {
> + reg = <0x28 0x4>;
> + };
> + };
> + };
> +
> + ethernet-switch {
> + compatible = "airoha,an8855-switch";
> +
> + ports {
Same comment here.
Why do we need 2 examples of the same thing? Isn't this 1 complete
example here enough?
Reviewed-by: Rob Herring (Arm) <robh@...nel.org>
Rob
Powered by blists - more mailing lists