| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250701-tb16-dt-v9-4-7d9e280837b5@oldschoolsolutions.biz>
Date: Tue, 01 Jul 2025 19:02:38 +0200
From: Jens Glathe via B4 Relay <devnull+jens.glathe.oldschoolsolutions.biz@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Matthias Kaehlcke <mka@...omium.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Aleksandrs Vinarskis <alex.vinarskis@...il.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
Jens Glathe <jens.glathe@...schoolsolutions.biz>
Subject: [PATCH v9 4/4] arm64: dts: qcom: Add Lenovo ThinkBook 16 G7 QOY
device tree
From: Jens Glathe <jens.glathe@...schoolsolutions.biz>
Device tree for the Lenovo Thinkbook 16 G7 QOY
The Laptop is a Snapdragon X1 / X1 Plus (Purwa) based device [1].
Supported features:
- USB type-c and type-a ports
- Keyboard
- Touchpad (all that are described in the dsdt)
- Touchscreen (described in the dsdt, no known SKUss)
- Display including PWM backlight control
- PCIe devices
- nvme
- SDHC card reader
- ath12k WCN7850 Wifi and Bluetooth
- ADSP and CDSP
- GPIO keys (Lid switch)
- Sound via internal speakers / DMIC / USB / headphone jack
- DP Altmode with 2 lanes (as all of these still do)
- Integrated fingerprint reader (FPC)
- Integrated UVC camera
- X1-45 GPU
Not supported yet:
- HDMI port.
- EC and some fn hotkeys.
Limited support yet:
- SDHC card reader is based on the on-chip sdhc_2 controller, but the driver from
the Snapdragon Dev Kit is only a partial match. It can do normal slow sd cards,
but not UHS-I (SD104) and UHS-II.
This work was done without any schematics or non-public knowledge of the device.
So, it is based on the existing x1e device trees, dsdt analysis, using HWInfo
ARM64, and pure guesswork. It has been confirmed, however, that the device really
has 4 NXP PTN3222 eUSB2 repeaters, one of which doesn't have a reset GPIO (eusb5
@43).
Signed-off-by: Jens Glathe <jens.glathe@...schoolsolutions.biz>
Co-developed by: Aleksandrs Vinarskis <alex.vinarskis@...il.com>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi | 2 +-
.../boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts | 1657 ++++++++++++++++++++
3 files changed, 1660 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4bfa926b6a0850c3c459bcba28129c559d50a7cf..6b1d71daff5a778237c5e3706aaea8e29dafa001 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -333,3 +333,5 @@ x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
x1p42100-crd-el2-dtbs := x1p42100-crd.dtb x1-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb x1p42100-crd-el2.dtb
+x1p42100-lenovo-thinkbook-16-el2-dtbs := x1p42100-lenovo-thinkbook-16.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += x1p42100-lenovo-thinkbook-16.dtb x1p42100-lenovo-thinkbook-16-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
index e3888bc143a0aaae23c92d400d48ea94423e0366..378635f7cb0bfe37cf10644a16bd8b3cca447f3c 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
@@ -170,7 +170,7 @@ trip1 {
};
};
- pm8010-thermal {
+ pm8010_thermal: pm8010-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&pm8010_temp_alarm>;
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
new file mode 100644
index 0000000000000000000000000000000000000000..d117e1b4848c13e4a8f5a342d09fe8b9878889cd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
@@ -0,0 +1,1657 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ * Copyright (c) 2025, Jens Glathe
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1p42100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+/delete-node/ &pm8010;
+/delete-node/ &pm8010_thermal;
+
+/ {
+ model = "Lenovo ThinkBook 16 Gen 7 QOY";
+ compatible = "lenovo,thinkbook-16", "qcom,x1p42100";
+ chassis-type = "laptop";
+
+ aliases {
+ serial0 = &uart21;
+ serial1 = &uart14;
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9385-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_l15b_1p8>;
+ vdd-rxtx-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l15b_1p8>;
+ vdd-mic-bias-supply = <&vreg_bob1>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8550_pwm 3 500000>;
+
+ power-supply = <&vreg_edp_bl>;
+ };
+
+ /*
+ * This is an odd one. The camera is physically behind the eusb9 repeater (confirmed) but
+ * if it is placed below the usb_2_dwc3 node, it will be switched of after ~30 seconds.
+ * The reason seems to be that the dwc3 driver does not probe for child nodes when in
+ * host-only mode. But that's the default setting for the xhci controllers due to issues
+ * when in OTG mode. https://lore.kernel.org/all/20241210111444.26240-1-johan+linaro@kernel.org/
+ * The whole reason it is described in the dt (as an USB device) is its requirement for
+ * that additional regulator, and to get power management to switch it off when suspended.
+ * Defining it stand-alone does work.
+ */
+ camera {
+ compatible = "usb5986,1198";
+
+ vdd-supply = <&vreg_cam_5p0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&hall_int_n_default>;
+ pinctrl-names = "default";
+
+ switch-lid {
+ gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+ };
+
+ pmic-glink {
+ compatible = "qcom,x1e80100-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+ <&tlmm 123 GPIO_ACTIVE_HIGH>;
+
+ /* Display-adjacent port */
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "host";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss0_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_sbu: endpoint {
+ remote-endpoint = <&usb_1_ss0_sbu_mux>;
+ };
+ };
+ };
+ };
+
+ /* User-adjacent port */
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "host";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_ss1_hs_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_sbu: endpoint {
+ remote-endpoint = <&usb_1_ss1_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
+ sound {
+ compatible = "qcom,x1e80100-sndcard";
+ model = "X1E80100-LENOVO-ThinkBook-16";
+ audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "VA DMIC0", "VA MIC BIAS3",
+ "VA DMIC1", "VA MIC BIAS3",
+ "VA DMIC2", "VA MIC BIAS1",
+ "VA DMIC3", "VA MIC BIAS1",
+ "TX SWR_INPUT1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ codec {
+ sound-dai = <&lpass_vamacro 0>;
+ };
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+
+ usb-1-ss0-sbu-mux {
+ compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 168 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_1_ss0_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb_1_ss0_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_sbu>;
+ };
+ };
+ };
+
+ usb-1-ss1-sbu-mux {
+ compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 179 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_1_ss1_sbu_default>;
+ pinctrl-names = "default";
+
+ mode-switch;
+ orientation-switch;
+
+ port {
+ usb_1_ss1_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_sbu>;
+ };
+ };
+ };
+
+ vreg_cam_5p0: regulator-cam-5p0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_CAM_5P0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&cam_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_edp_bl: regulator-edp-bl {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VBL9";
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_bl_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_MISC_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&misc_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_NVME_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_wcn_0p95: regulator-wcn-0p95 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_0P95";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_1p9: regulator-wcn-1p9 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_1P9";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+
+ vin-supply = <&vreg_wcn_3p3>;
+ };
+
+ vreg_wcn_3p3: regulator-wcn-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_WCN_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&wcn_sw_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ vdd-supply = <&vreg_wcn_0p95>;
+ vddio-supply = <&vreg_l15b_1p8>;
+ vddaon-supply = <&vreg_wcn_0p95>;
+ vdddig-supply = <&vreg_wcn_0p95>;
+ vddrfa1p2-supply = <&vreg_wcn_1p9>;
+ vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+ wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&wcn_wlan_en>;
+ pinctrl-1 = <&wcn_bt_en>;
+ pinctrl-names = "default";
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob2>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l12-supply = <&vreg_s5j_1p2>;
+ vdd-l15-supply = <&vreg_s4c_1p8>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b_1p8: ldo4 {
+ regulator-name = "vreg_l4b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p0: ldo5 {
+ regulator-name = "vreg_l5b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p8: ldo7 {
+ regulator-name = "vreg_l7b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_3p0: ldo8 {
+ regulator-name = "vreg_l8b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p2: ldo12 {
+ regulator-name = "vreg_l12b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p0: ldo14 {
+ regulator-name = "vreg_l14b_3p0";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l16b_2p9: ldo16 {
+ regulator-name = "vreg_l16b_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4c_1p8: smps4 {
+ regulator-name = "vreg_s4c_1p8";
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_0p8: ldo2 {
+ regulator-name = "vreg_l2c_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p8: ldo3 {
+ regulator-name = "vreg_l3c_0p8";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s4c_1p8>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_l1d_0p8: ldo1 {
+ regulator-name = "vreg_l1d_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p9: ldo2 {
+ regulator-name = "vreg_l2d_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d_1p8: ldo3 {
+ regulator-name = "vreg_l3d_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l2-supply = <&vreg_s1f_0p7>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+
+ vreg_l2e_0p8: ldo2 {
+ regulator-name = "vreg_l2e_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pmc8380-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s5j_1p2>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s5j_1p2>;
+ vdd-s1-supply = <&vph_pwr>;
+
+ vreg_s1f_0p7: smps1 {
+ regulator-name = "vreg_s1f_0p7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_1p0: ldo1 {
+ regulator-name = "vreg_l1f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_1p0: ldo2 {
+ regulator-name = "vreg_l2f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_1p0: ldo3 {
+ regulator-name = "vreg_l3f_1p0";
+ regulator-min-microvolt = <1024000>;
+ regulator-max-microvolt = <1024000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-6 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "i";
+
+ vdd-l1-supply = <&vreg_s4c_1p8>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+
+ vreg_l1i_1p8: ldo1 {
+ regulator-name = "vreg_l1i_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l2i_1p2: ldo2 {
+ regulator-name = "vreg_l2i_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3i_0p8: ldo3 {
+ regulator-name = "vreg_l3i_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s1i_0p9: smps1 {
+ regulator-name = "vreg_s1i_0p9";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2i_1p0: smps2 {
+ regulator-name = "vreg_s2i_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "j";
+
+ vdd-l1-supply = <&vreg_s1f_0p7>;
+ vdd-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-supply = <&vreg_s1f_0p7>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s5j_1p2: smps5 {
+ regulator-name = "vreg_s5j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1j_0p8: ldo1 {
+ regulator-name = "vreg_l1j_0p8";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2j_1p2: ldo2 {
+ regulator-name = "vreg_l2j_1p2";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1256000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3j_0p8: ldo3 {
+ regulator-name = "vreg_l3j_0p8";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/x1p42100/LENOVO/21NH/qcdxkmsucpurwa.mbn";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+
+ pinctrl-0 = <&qup_i2c2_data_clk>, <&tpad_default>, <&kybd_default>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* ELAN06FA */
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ /* CIRQ1080 or SYNA2BA6 */
+ touchpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+
+ hid-descr-addr = <0x20>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ /* FTCS0038 */
+ touchpad@38 {
+ compatible = "hid-over-i2c";
+ reg = <0x38>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ reg = <0x3a>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+
+ /* GXTP5100 */
+ touchpad@5d {
+ compatible = "hid-over-i2c";
+ reg = <0x5d>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l12b_1p2>;
+
+ wakeup-source;
+ };
+};
+
+&i2c5 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ eusb5_repeater: redriver@43 {
+ compatible = "nxp,ptn3222";
+ reg = <0x43>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+ };
+
+ eusb3_repeater: redriver@47 {
+ compatible = "nxp,ptn3222";
+ reg = <0x47>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb3_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ eusb9_repeater: redriver@4b {
+ compatible = "nxp,ptn3222";
+ reg = <0x4b>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb9_reset_n>;
+ pinctrl-names = "default";
+ };
+
+ eusb6_repeater: redriver@4f {
+ compatible = "nxp,ptn3222";
+ reg = <0x4f>;
+ #phy-cells = <0>;
+
+ vdd3v3-supply = <&vreg_l13b_3p0>;
+ vdd1v8-supply = <&vreg_l4b_1p8>;
+
+ reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&eusb6_reset_n>;
+ pinctrl-names = "default";
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ /* ILIT2911 or GTCH1563 */
+ touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_l15b_1p8>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&lpass_tlmm {
+ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&lpass_vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_l1b_1p8>;
+ qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+ status = "okay";
+};
+
+&mdss_dp1_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+ status = "okay";
+};
+
+&mdss_dp2_out {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2_phy {
+// vdda-phy-supply = <&vreg_l3b>;
+// vdda-pll-supply = <&vreg_l6b>;
+
+ status = "okay";
+};
+
+&mdss_dp3 {
+ /delete-property/ #sound-dai-cells;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+
+ backlight = <&backlight>;
+
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
+ power-supply = <&vreg_edp_3p3>;
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mdss_dp3_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
+&pcie6a {
+ perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie6a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l1d_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pm8550_pwm {
+ status = "okay";
+};
+
+&pm8550ve_8_gpios {
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ input-disable;
+ output-enable;
+ drive-push-pull;
+ power-source = <1>; /* 1.8 V */
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+};
+
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ input-disable;
+ output-enable;
+ };
+
+ edp_bl_reg_en: edp-bl-reg-en-state {
+ pins = "gpio10";
+ function = "normal";
+ };
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
+&qupv3_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/x1p42100/LENOVO/21NH/qcadsp8380.mbn",
+ "qcom/x1p42100/LENOVO/21NH/adsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1p42100/LENOVO/21NH/qccdsp8380.mbn",
+ "qcom/x1p42100/LENOVO/21NH/cdsp_dtbs.elf";
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+ vmmc-supply = <&vreg_l9b_2p9>;
+ vqmmc-supply = <&vreg_l6b_1p8>;
+// bus-width = <4>;
+// no-sdio;
+// no-mmc;
+ status = "okay";
+};
+
+&smb2360_0 {
+ status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+ status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+ vdd18-supply = <&vreg_l3d_1p8>;
+ vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+ status = "okay";
+
+ pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+ pinctrl-names = "default";
+
+ /* WSA8845, Left Speaker */
+ left_spkr: speaker@0,0 {
+ compatible = "sdw20217020400";
+ reg = <0 0>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <1 2 3 7 10 13>;
+ };
+
+ /* WSA8845, Right Speaker */
+ right_spkr: speaker@0,1 {
+ compatible = "sdw20217020400";
+ reg = <0 1>;
+ reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ vdd-1p8-supply = <&vreg_l15b_1p8>;
+ vdd-io-supply = <&vreg_l12b_1p2>;
+ qcom,port-mapping = <4 5 6 7 11 13>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ /* WCD9385 RX */
+ wcd_rx: codec@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ /* WCD9385 TX */
+ wcd_tx: codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <2 2 3 4>;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <34 2>, /* Unused */
+ <72 2>, /* Secure EC I2C connection (?) */
+ <238 1>; /* UFS Reset */
+
+ cam_reg_en: cam-reg-en-state {
+ pins = "gpio44";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ eusb3_reset_n: eusb3-reset-n-state {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ eusb6_reset_n: eusb6-reset-n-state {
+ pins = "gpio184";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ eusb9_reset_n: eusb9-reset-n-state {
+ pins = "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ hall_int_n_default: hall-int-n-state {
+ pins = "gpio92";
+ function = "gpio";
+ bias-disable;
+ };
+
+ kybd_default: kybd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ bias-disable;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio18";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio147";
+ function = "pcie4_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio146";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio148";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie6a_default: pcie6a-default-state {
+ clkreq-n-pins {
+ pins = "gpio153";
+ function = "pcie6a_clk";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio152";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio154";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_card_det_n: sdc2-card-det-state {
+ pins = "gpio71";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tpad_default: tpad-default-state {
+ pins = "gpio3";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ ts0_default: ts0-default-state {
+ int-n-pins {
+ pins = "gpio51";
+ function = "gpio";
+ bias-disable;
+ };
+
+ reset-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ output-high;
+ drive-strength = <16>;
+ };
+ };
+
+ usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+ oe-n-pins {
+ pins = "gpio167";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sel-pins {
+ pins = "gpio168";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ };
+
+ usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+ oe-n-pins {
+ pins = "gpio178";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sel-pins {
+ pins = "gpio179";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ wcd_default: wcd-reset-n-active-state {
+ pins = "gpio191";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-low;
+ };
+
+ wcn_bt_en: wcn-bt-en-state {
+ pins = "gpio116";
+ function = "gpio";
+ drive-strength = <16>;
+ output-low;
+ bias-pull-down;
+ };
+
+ wcn_sw_en: wcn-sw-en-state {
+ pins = "gpio214";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ wcn_wlan_en: wcn-wlan-en-state {
+ pins = "gpio117";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+ max-speed = <3200000>;
+
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ };
+};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_0_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l1j_0p8>;
+
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&smb2360_1_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ vdda-phy-supply = <&vreg_l2j_1p2>;
+ vdda-pll-supply = <&vreg_l2d_0p9>;
+
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_1_ss2 {
+ status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+ phys = <&usb_1_ss2_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_ss2_hsphy {
+ vdd-supply = <&vreg_l3j_0p8>;
+ vdda12-supply = <&vreg_l2j_1p2>;
+
+ phys = <&eusb5_repeater>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb9_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp {
+ status = "okay";
+};
+
+&usb_mp_hsphy0 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb6_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
+
+&usb_mp_hsphy1 {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&eusb3_repeater>;
+
+ status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3c_0p8>;
+
+ status = "okay";
+};
--
2.48.1
Powered by blists - more mailing lists