| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250701225355.2977294-1-robh@kernel.org>
Date: Tue, 1 Jul 2025 17:53:50 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Marek Behún <kabel@...nel.org>,
Keguang Zhang <keguang.zhang@...il.com>,
Heiko Stuebner <heiko@...ech.de>,
Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
Cc: linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-mips@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org
Subject: [PATCH] dt-bindings: gpio: Create a trivial GPIO schema
Many simple GPIO controllers without interrupt capability have the same
schema other than their compatible value. Combine all these bindings
into a single schema. The criteria to be included here is must use 2
cells, have no interrupt capability, have 0 or 1 "reg" entries, and
have no other resources (like clocks).
Note that "ngpios" is now allowed in some cases it wasn't before and
constraints on it have been dropped.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
We could also do this for ones with interrupts, but that seems a bit
more varied.
---
.../devicetree/bindings/gpio/fcs,fxl6408.yaml | 59 ----------
.../bindings/gpio/gateworks,pld-gpio.txt | 19 ----
.../devicetree/bindings/gpio/gpio-lp3943.txt | 37 -------
.../bindings/gpio/gpio-max77620.txt | 25 -----
.../devicetree/bindings/gpio/gpio-moxtet.txt | 18 ---
.../devicetree/bindings/gpio/gpio-palmas.txt | 27 -----
.../bindings/gpio/gpio-pca9570.yaml | 56 ----------
.../bindings/gpio/gpio-tpic2810.yaml | 51 ---------
.../devicetree/bindings/gpio/gpio-ts4800.txt | 20 ----
.../devicetree/bindings/gpio/gpio-ts4900.txt | 30 -----
.../devicetree/bindings/gpio/gpio-xgene.txt | 22 ----
.../bindings/gpio/ibm,ppc4xx-gpio.txt | 24 ----
.../bindings/gpio/loongson,ls1x-gpio.yaml | 49 ---------
.../bindings/gpio/nintendo,hollywood-gpio.txt | 26 -----
.../gpio/rockchip,rk3328-grf-gpio.yaml | 50 ---------
.../bindings/gpio/snps,creg-gpio.txt | 21 ----
.../devicetree/bindings/gpio/ti,7416374.yaml | 56 ----------
.../bindings/gpio/trivial-gpio.yaml | 104 ++++++++++++++++++
18 files changed, 104 insertions(+), 590 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml
delete mode 100644 Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-max77620.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-palmas.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-ts4800.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-ts4900.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-xgene.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml
delete mode 100644 Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
delete mode 100644 Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/ti,7416374.yaml
create mode 100644 Documentation/devicetree/bindings/gpio/trivial-gpio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml b/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml
deleted file mode 100644
index b74fa81e7d05..000000000000
--- a/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml
+++ /dev/null
@@ -1,59 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/fcs,fxl6408.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Fairchild FXL6408 I2C GPIO Expander
-
-maintainers:
- - Emanuele Ghidoli <emanuele.ghidoli@...adex.com>
-
-properties:
- compatible:
- enum:
- - fcs,fxl6408
-
- reg:
- maxItems: 1
-
- "#gpio-cells":
- const: 2
-
- gpio-controller: true
-
- gpio-line-names:
- minItems: 1
- maxItems: 8
-
-patternProperties:
- "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
- type: object
- required:
- - gpio-hog
-
-required:
- - compatible
- - reg
- - gpio-controller
- - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
- - |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio_expander_43: gpio-expander@43 {
- compatible = "fcs,fxl6408";
- reg = <0x43>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "Wi-Fi_W_DISABLE", "Wi-Fi_WKUP_WLAN",
- "PWR_EN_+V3.3_WiFi_N", "PCIe_REF_CLK_EN",
- "USB_RESET_N", "USB_BYPASS_N", "Wi-Fi_PDn",
- "Wi-Fi_WKUP_BT";
- };
- };
diff --git a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
deleted file mode 100644
index d543fd1b8b23..000000000000
--- a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Gateworks PLD GPIO controller bindings
-
-The GPIO controller should be a child node on an I2C bus.
-
-Required properties:
-- compatible: Should be "gateworks,pld-gpio"
-- reg: I2C slave address
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the gpio number and
- the second cell is used to specify optional parameters.
-
-Example:
-
-pld@56 {
- compatible = "gateworks,pld-gpio";
- reg = <0x56>;
- gpio-controller;
- #gpio-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
deleted file mode 100644
index 80fcb7d70e13..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-TI/National Semiconductor LP3943 GPIO controller
-
-Required properties:
- - compatible: "ti,lp3943-gpio"
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be 2. See gpio.txt in this directory for a
- description of the cells format.
-
-Example:
-Simple LED controls with LP3943 GPIO controller
-
-&i2c4 {
- lp3943@60 {
- compatible = "ti,lp3943";
- reg = <0x60>;
-
- gpioex: gpio {
- compatible = "ti,lp3943-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-};
-
-leds {
- compatible = "gpio-leds";
- indicator1 {
- label = "indi1";
- gpios = <&gpioex 9 GPIO_ACTIVE_LOW>;
- };
-
- indicator2 {
- label = "indi2";
- gpios = <&gpioex 10 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
deleted file mode 100644
index 410e716fd3d2..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-GPIO driver for MAX77620 Power management IC from Maxim Semiconductor.
-
-Device has 8 GPIO pins which can be configured as GPIO as well as the
-special IO functions.
-
-Required properties:
--------------------
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-For more details, please refer generic GPIO DT binding document
-<devicetree/bindings/gpio/gpio.txt>.
-
-Example:
---------
-#include <dt-bindings/mfd/max77620.h>
-...
-max77620@3c {
- compatible = "maxim,max77620";
-
- gpio-controller;
- #gpio-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
deleted file mode 100644
index 410759de9f09..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Turris Mox Moxtet GPIO expander via Moxtet bus
-
-Required properties:
- - compatible : Should be "cznic,moxtet-gpio".
- - gpio-controller : Marks the device node as a GPIO controller.
- - #gpio-cells : Should be two. For consumer use see gpio.txt.
-
-Other properties are required for a Moxtet bus device, please refer to
-Documentation/devicetree/bindings/bus/moxtet.txt.
-
-Example:
-
- moxtet_sfp: gpio@0 {
- compatible = "cznic,moxtet-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0>;
- }
diff --git a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt
deleted file mode 100644
index 08b5b52a3ae0..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Palmas GPIO controller bindings
-
-Required properties:
-- compatible:
- - "ti,palams-gpio" for palma series of the GPIO controller
- - "ti,tps80036-gpio" for Palma series device TPS80036.
- - "ti,tps65913-gpio" for palma series device TPS65913.
- - "ti,tps65914-gpio" for palma series device TPS65914.
-- #gpio-cells : Should be two.
- - first cell is the gpio pin number
- - second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- gpio-controller : Marks the device node as a GPIO controller.
-
-Note: This gpio node will be sub node of palmas node.
-
-Example:
- palmas: tps65913@58 {
- :::::::::::
- palmas_gpio: palmas_gpio {
- compatible = "ti,palmas-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
- :::::::::::
- };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
deleted file mode 100644
index 6f73961001b7..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ /dev/null
@@ -1,56 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/gpio-pca9570.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: PCA9570 I2C GPO expander
-
-maintainers:
- - Sungbo Eo <mans0n@...ani.run>
-
-properties:
- compatible:
- enum:
- - dlg,slg7xl45106
- - nxp,pca9570
- - nxp,pca9571
-
- reg:
- maxItems: 1
-
- gpio-controller: true
-
- '#gpio-cells':
- const: 2
-
- gpio-line-names:
- minItems: 4
- maxItems: 8
-
- label:
- description: A descriptive name for this device.
-
-required:
- - compatible
- - reg
- - gpio-controller
- - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
- - |
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio@24 {
- compatible = "nxp,pca9570";
- reg = <0x24>;
- gpio-controller;
- #gpio-cells = <2>;
- };
- };
-
-...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
deleted file mode 100644
index 157969bc4c46..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
+++ /dev/null
@@ -1,51 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: TPIC2810 GPIO controller
-
-maintainers:
- - Aswath Govindraju <a-govindraju@...com>
-
-properties:
- compatible:
- enum:
- - ti,tpic2810
-
- reg:
- maxItems: 1
-
- gpio-controller: true
-
- "#gpio-cells":
- const: 2
-
- gpio-line-names:
- minItems: 1
- maxItems: 32
-
-required:
- - compatible
- - reg
- - gpio-controller
- - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/gpio/gpio.h>
-
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
- gpio@60 {
- compatible = "ti,tpic2810";
- reg = <0x60>;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "LED A", "LED B", "LED C";
- };
- };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt
deleted file mode 100644
index 92ea9c8f6399..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* TS-4800 FPGA's GPIO controller bindings
-
-Required properties:
-- compatible: Must be "technologic,ts4800-gpio".
-- #gpio-cells: Should be two. The first cell is the pin number.
-- reg: Physical base address of the controller and length
- of memory mapped region.
-
-Optional property:
-- ngpios: See "gpio.txt"
-
-Example:
-
-gpio1: gpio {
- compatible = "technologic,ts4800-gpio";
- reg = <0x10020 0x6>;
- ngpios = <8>;
- gpio-controller;
- #gpio-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt
deleted file mode 100644
index 3f8e71b1ab2a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Technologic Systems I2C-FPGA's GPIO controller bindings
-
-This bindings describes the GPIO controller for Technologic's FPGA core.
-TS-4900's FPGA encodes the GPIO state on 3 bits, whereas the TS-7970's FPGA
-uses 2 bits: it doesn't use a dedicated input bit.
-
-Required properties:
-- compatible: Should be one of the following
- "technologic,ts4900-gpio"
- "technologic,ts7970-gpio"
-- reg: Physical base address of the controller and length
- of memory mapped region.
-- #gpio-cells: Should be two. The first cell is the pin number.
-- gpio-controller: Marks the device node as a gpio controller.
-
-Optional property:
-- ngpios: Number of GPIOs this controller is instantiated with,
- the default is 32. See gpio.txt for more details.
-
-Example:
-
-&i2c2 {
- gpio8: gpio@28 {
- compatible = "technologic,ts4900-gpio";
- reg = <0x28>;
- #gpio-cells = <2>;
- gpio-controller;
- ngpios = <32>;
- };
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt
deleted file mode 100644
index 86dbb05e7758..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-APM X-Gene SoC GPIO controller bindings
-
-This is a gpio controller that is part of the flash controller.
-This gpio controller controls a total of 48 gpios.
-
-Required properties:
-- compatible: "apm,xgene-gpio" for X-Gene GPIO controller
-- reg: Physical base address and size of the controller's registers
-- #gpio-cells: Should be two.
- - first cell is the pin number
- - second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- gpio-controller: Marks the device node as a GPIO controller.
-
-Example:
- gpio0: gpio0@...1c000 {
- compatible = "apm,xgene-gpio";
- reg = <0x0 0x1701c000 0x0 0x40>;
- gpio-controller;
- #gpio-cells = <2>;
- };
diff --git a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt
deleted file mode 100644
index d58b3958f3ea..000000000000
--- a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* IBM/AMCC/APM GPIO Controller for PowerPC 4XX series and compatible SoCs
-
-All GPIOs are pin-shared with other functions. DCRs control whether a
-particular pin that has GPIO capabilities acts as a GPIO or is used for
-another purpose. GPIO outputs are separately programmable to emulate
-an open-drain driver.
-
-Required properties:
- - compatible: must be "ibm,ppc4xx-gpio"
- - reg: address and length of the register set for the device
- - #gpio-cells: must be set to 2. The first cell is the pin number
- and the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
- - gpio-controller: marks the device node as a gpio controller.
-
-Example:
-
-GPIO0: gpio@...00b00 {
- compatible = "ibm,ppc4xx-gpio";
- reg = <0xef600b00 0x00000048>;
- #gpio-cells = <2>;
- gpio-controller;
-};
diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml
deleted file mode 100644
index 1a472c05697c..000000000000
--- a/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml
+++ /dev/null
@@ -1,49 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/loongson,ls1x-gpio.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Loongson-1 GPIO controller
-
-maintainers:
- - Keguang Zhang <keguang.zhang@...il.com>
-
-properties:
- compatible:
- const: loongson,ls1x-gpio
-
- reg:
- maxItems: 1
-
- gpio-controller: true
-
- "#gpio-cells":
- const: 2
-
- ngpios:
- minimum: 1
- maximum: 32
-
-required:
- - compatible
- - reg
- - gpio-controller
- - "#gpio-cells"
- - ngpios
-
-additionalProperties: false
-
-examples:
- - |
- gpio0: gpio@...010c0 {
- compatible = "loongson,ls1x-gpio";
- reg = <0x1fd010c0 0x4>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- ngpios = <32>;
- };
-
-...
diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
deleted file mode 100644
index df63da46309c..000000000000
--- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Nintendo Wii (Hollywood) GPIO controller
-
-Required properties:
-- compatible: "nintendo,hollywood-gpio"
-- reg: Physical base address and length of the controller's registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the pin number and the
- second cell is used to specify optional parameters:
- - bit 0 specifies polarity (0 for normal, 1 for inverted).
-
-Optional properties:
-- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
- interrupt.
-
-Example:
-
- GPIO: gpio@...00c0 {
- #gpio-cells = <2>;
- compatible = "nintendo,hollywood-gpio";
- reg = <0x0d8000c0 0x40>;
- gpio-controller;
- ngpios = <24>;
- }
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
deleted file mode 100644
index d8cce73ea0ae..000000000000
--- a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
+++ /dev/null
@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Rockchip RK3328 General Register Files GPIO controller
-
-description:
- The Rockchip RK3328 General Register File (GRF) outputs only the
- GPIO_MUTE pin, originally for codec mute control, but it can also be used
- for general purpose. It is manipulated by the GRF_SOC_CON10 register.
- If needed in the future support for the HDMI pins can also be added.
- The GPIO node should be declared as the child of the GRF node.
-
- The GPIO_MUTE pin is referred to in the format
-
- <&grf_gpio 0 GPIO_ACTIVE_LOW>
-
- The first cell is the pin number and
- the second cell is used to specify the GPIO polarity
- 0 = Active high
- 1 = Active low
-
-maintainers:
- - Heiko Stuebner <heiko@...ech.de>
-
-properties:
- compatible:
- const: rockchip,rk3328-grf-gpio
-
- gpio-controller: true
-
- "#gpio-cells":
- const: 2
-
-required:
- - compatible
- - gpio-controller
- - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
- - |
- grf_gpio: gpio {
- compatible = "rockchip,rk3328-grf-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
diff --git a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
deleted file mode 100644
index 1b30812b015b..000000000000
--- a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Synopsys GPIO via CREG (Control REGisters) driver
-
-Required properties:
-- compatible : "snps,creg-gpio-hsdk" or "snps,creg-gpio-axs10x".
-- reg : Exactly one register range with length 0x4.
-- #gpio-cells : Since the generic GPIO binding is used, the
- amount of cells must be specified as 2. The first cell is the
- pin number, the second cell is used to specify optional parameters:
- See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-- gpio-controller : Marks the device node as a GPIO controller.
-- ngpios: Number of GPIO pins.
-
-Example:
-
-gpio: gpio@...014b0 {
- compatible = "snps,creg-gpio-hsdk";
- reg = <0xf00014b0 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/ti,7416374.yaml b/Documentation/devicetree/bindings/gpio/ti,7416374.yaml
deleted file mode 100644
index 33472f091101..000000000000
--- a/Documentation/devicetree/bindings/gpio/ti,7416374.yaml
+++ /dev/null
@@ -1,56 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/ti,7416374.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: TI 74XX MMIO GPIO
-
-maintainers:
- - Frank Li <Frank.Li@....com>
-
-properties:
- compatible:
- enum:
- - ti,741g125 # for 741G125 (1-bit Input),
- - ti,741g174 # for 741G74 (1-bit Output),
- - ti,742g125 # for 742G125 (2-bit Input),
- - ti,7474 # for 7474 (2-bit Output),
- - ti,74125 # for 74125 (4-bit Input),
- - ti,74175 # for 74175 (4-bit Output),
- - ti,74365 # for 74365 (6-bit Input),
- - ti,74174 # for 74174 (6-bit Output),
- - ti,74244 # for 74244 (8-bit Input),
- - ti,74273 # for 74273 (8-bit Output),
- - ti,741624 # for 741624 (16-bit Input),
- - ti,7416374 # for 7416374 (16-bit Output).
-
- reg:
- maxItems: 1
-
- gpio-controller: true
-
- '#gpio-cells':
- const: 2
- description: |
- The first cell is the pin number and
- the second cell is used to specify the GPIO polarity:
- 0 = Active High,
- 1 = Active Low.
-
-required:
- - compatible
- - reg
- - gpio-controller
- - '#gpio-cells'
-
-additionalProperties: false
-
-examples:
- - |
- gpio@...08004 {
- compatible = "ti,74174";
- reg = <0x30008004 0x1>;
- gpio-controller;
- #gpio-cells = <2>;
- };
diff --git a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml
new file mode 100644
index 000000000000..dd271aa9d97c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/trivial-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trivial 2-cell GPIO controllers
+
+maintainers:
+ - Bartosz Golaszewski <brgl@...ev.pl>
+
+properties:
+ compatible:
+ enum:
+ - apm,xgene-gpio
+ - cznic,moxtet-gpio
+ - dlg,slg7xl45106
+ - fcs,fxl6408
+ - gateworks,pld-gpio
+ - ibm,ppc4xx-gpio
+ - loongson,ls1x-gpio
+ - maxim,max77620
+ - nintendo,hollywood-gpio
+ - nxp,pca9570
+ - nxp,pca9571
+ - rockchip,rk3328-grf-gpio
+ - snps,creg-gpio-hsdk
+ - technologic,ts4800-gpio
+ - technologic,ts4900-gpio
+ - technologic,ts7970-gpio
+ - ti,741g125 # for 741G125 (1-bit Input),
+ - ti,741g174 # for 741G74 (1-bit Output),
+ - ti,742g125 # for 742G125 (2-bit Input),
+ - ti,7474 # for 7474 (2-bit Output),
+ - ti,74125 # for 74125 (4-bit Input),
+ - ti,74175 # for 74175 (4-bit Output),
+ - ti,74365 # for 74365 (6-bit Input),
+ - ti,74174 # for 74174 (6-bit Output),
+ - ti,74244 # for 74244 (8-bit Input),
+ - ti,74273 # for 74273 (8-bit Output),
+ - ti,741624 # for 741624 (16-bit Input),
+ - ti,7416374 # for 7416374 (16-bit Output).
+ - ti,lp3943-gpio
+ - ti,palmas-gpio
+ - ti,tpic2810
+ - ti,tps80036-gpio
+ - ti,tps65913-gpio
+ - ti,tps65914-gpio
+
+ reg:
+ maxItems: 1
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ gpio-line-names: true
+
+ ngpios: true
+
+ # Don't add more properties
+
+patternProperties:
+ "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+ type: object
+ required:
+ - gpio-hog
+
+required:
+ - compatible
+ - '#gpio-cells'
+ - gpio-controller
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - maxim,max77620
+ - rockchip,rk3328-grf-gpio
+ - ti,lp3943-gpio
+ - ti,palmas-gpio
+ - ti,tps80036-gpio
+ - ti,tps65913-gpio
+ - ti,tps65914-gpio
+ then:
+ properties:
+ reg: false
+ else:
+ required:
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@...1c000 {
+ compatible = "apm,xgene-gpio";
+ reg = <0x1701c000 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
--
2.47.2
Powered by blists - more mailing lists