linux-kernel - Re: [PATCH v2] reset: brcmstb: Enable reset drivers for ARCH

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <886fe23d09c3db0e884b6e2d975344a71e12731e.camel@pengutronix.de>
Date: Tue, 01 Jul 2025 10:42:53 +0200
From: Philipp Zabel <p.zabel@...gutronix.de>
To: Peter Robinson <pbrobinson@...il.com>, Florian Fainelli
	 <f.fainelli@...il.com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] reset: brcmstb: Enable reset drivers for ARCH_BCM2835

On Mo, 2025-06-30 at 18:52 +0100, Peter Robinson wrote:
> The BRCMSTB and BRCMSTB_RESCAL reset drivers are also
> used in the BCM2712, AKA the RPi5. The RPi platforms
> have typically used the ARCH_BCM2835, and the PCIe
> support for this SoC can use this config which depends
> on these drivers so enable building them when just that
> arch option is enabled to ensure the platform works as
> expected.
> 
> Signed-off-by: Peter Robinson <pbrobinson@...il.com>
> ---
> 
> v2: Update the defaults to add ARCH_BCM2835
> 
> This allows 6.16 to boot on the rpi5 when just using ARCH_BCM2835,
> which is what Fedora uses, otherwise the boot stops due to deps.

Applied to reset/next, thanks!

[1/1] reset: brcmstb: Enable reset drivers for ARCH_BCM2835
      https://git.pengutronix.de/cgit/pza/linux/commit/?id=1d99f92f71b6

regards
Philipp