[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250702150216.2a5410b3@kernel.org>
Date: Wed, 2 Jul 2025 15:02:16 -0700
From: Jakub Kicinski <kuba@...nel.org>
To: Kamil Horák - 2N <kamilh@...s.com>,
<florian.fainelli@...adcom.com>
Cc: <bcm-kernel-feedback-list@...adcom.com>, <andrew@...n.ch>,
<hkallweit1@...il.com>, <linux@...linux.org.uk>, <davem@...emloft.net>,
<edumazet@...gle.com>, <pabeni@...hat.com>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<f.fainelli@...il.com>, <robh@...nel.org>, <andrew+netdev@...n.ch>,
<horms@...nel.org>, <corbet@....net>, <linux-doc@...r.kernel.org>
Subject: Re: [PATCH net v5 0/4] net: phy: bcm54811: Fix the PHY
initialization
On Tue, 1 Jul 2025 09:50:11 +0200 Kamil Horák - 2N wrote:
> PATCH 1 - Add MII-Lite PHY interface mode as defined by Broadcom for
> their two-wire PHYs. It can be used with most Ethernet controllers
> under certain limitations (no half-duplex link modes etc.).
>
> PATCH 2 - Add MII-Lite PHY interface type
>
> PATCH 3 - Activation of MII-Lite interface mode on Broadcom bcm5481x
> PHYs
>
> PATCH 4 - Fix the BCM54811 PHY initialization so that it conforms
> to the datasheet regarding a reserved bit in the LRE Control
> register, which must be written to zero after every device reset.
> Also fix the LRE Status register reading, there is another bit to
> be ignored on bcm54811.
I'm a bit lost why the first 3 patches are included in a series for net.
My naive reading is we didn't support this extra mode, now we do,
which sounds like a new feature.. Patch 4, sure, but the dependency
is not obvious.
Powered by blists - more mailing lists