| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250702230030.2892116-1-robh@kernel.org>
Date: Wed, 2 Jul 2025 18:00:29 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Andrew Lunn <andrew@...n.ch>,
Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Zhang Rui <rui.zhang@...el.com>,
Lukasz Luba <lukasz.luba@....com>,
Miquel Raynal <miquel.raynal@...tlin.com>
Cc: linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org
Subject: [PATCH] dt-binding: thermal: Convert marvell,armada-ap806-thermal to DT schema
Convert the Marvell Armada AP80x/CP110 thermal binding to schema. It is
a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
.../arm/marvell/ap80x-system-controller.txt | 39 ----------------
.../arm/marvell/cp110-system-controller.txt | 43 ------------------
.../thermal/marvell,armada-ap806-thermal.yaml | 44 +++++++++++++++++++
3 files changed, 44 insertions(+), 82 deletions(-)
create mode 100644 Documentation/devicetree/bindings/thermal/marvell,armada-ap806-thermal.yaml
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
index c83245065d44..72de11bd2ef0 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
@@ -115,45 +115,6 @@ ap_syscon: system-controller@...000 {
SYSTEM CONTROLLER 1
===================
-Thermal:
---------
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal*.yaml
-
-The thermal IP can probe the temperature all around the processor. It
-may feature several channels, each of them wired to one sensor.
-
-It is possible to setup an overheat interrupt by giving at least one
-critical point to any subnode of the thermal-zone node.
-
-Required properties:
-- compatible: must be one of:
- * marvell,armada-ap806-thermal
-- reg: register range associated with the thermal functions.
-
-Optional properties:
-- interrupts: overheat interrupt handle. Should point to line 18 of the
- SEI irqchip. See interrupt-controller/interrupts.txt
-- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
- to this IP and represents the channel ID. There is one sensor per
- channel. O refers to the thermal IP internal channel, while positive
- IDs refer to each CPU.
-
-Example:
-ap_syscon1: system-controller@...000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f8000 0x1000>;
-
- ap_thermal: thermal-sensor@80 {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x80 0x10>;
- interrupt-parent = <&sei>;
- interrupts = <18>;
- #thermal-sensor-cells = <1>;
- };
-};
-
Cluster clocks:
---------------
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
index 9d5d70c98058..54ff9f218328 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
@@ -189,46 +189,3 @@ CP110_LABEL(syscon0): system-controller@...000 {
};
};
-
-SYSTEM CONTROLLER 1
-===================
-
-Thermal:
---------
-
-The thermal IP can probe the temperature all around the processor. It
-may feature several channels, each of them wired to one sensor.
-
-It is possible to setup an overheat interrupt by giving at least one
-critical point to any subnode of the thermal-zone node.
-
-For common binding part and usage, refer to
-Documentation/devicetree/bindings/thermal/thermal*.yaml
-
-Required properties:
-- compatible: must be one of:
- * marvell,armada-cp110-thermal
-- reg: register range associated with the thermal functions.
-
-Optional properties:
-- interrupts-extended: overheat interrupt handle. Should point to
- a line of the ICU-SEI irqchip (116 is what is usually used by the
- firmware). The ICU-SEI will redirect towards interrupt line #37 of the
- AP SEI which is shared across all CPs.
- See interrupt-controller/interrupts.txt
-- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
- to this IP and represents the channel ID. There is one sensor per
- channel. O refers to the thermal IP internal channel.
-
-Example:
-CP110_LABEL(syscon1): system-controller@...000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f8000 0x1000>;
-
- CP110_LABEL(thermal): thermal-sensor@70 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x70 0x10>;
- interrupts-extended = <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
- #thermal-sensor-cells = <1>;
- };
-};
diff --git a/Documentation/devicetree/bindings/thermal/marvell,armada-ap806-thermal.yaml b/Documentation/devicetree/bindings/thermal/marvell,armada-ap806-thermal.yaml
new file mode 100644
index 000000000000..fdbdf3c1273a
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/marvell,armada-ap806-thermal.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/marvell,armada-ap806-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada AP80x/CP110 thermal management
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@...tlin.com>
+
+properties:
+ compatible:
+ enum:
+ - marvell,armada-ap806-thermal
+ - marvell,armada-ap807-thermal
+ - marvell,armada-cp110-thermal
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: overheat interrupt
+ maxItems: 1
+
+ '#thermal-sensor-cells':
+ description: Cell represents the channel ID. There is one sensor per
+ channel. O refers to the thermal IP internal channel.
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ thermal-sensor@80 {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x80 0x10>;
+ interrupts = <18>;
+ #thermal-sensor-cells = <1>;
+ };
--
2.47.2
Powered by blists - more mailing lists