linux-kernel - [PATCH V5 1/2] dt-bindings: leds: pwm: add enable-gpios property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250704104338.46546-2-Qing-wu.Li@leica-geosystems.com.cn>
Date: Fri,  4 Jul 2025 18:43:37 +0800
From: LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
To: lee@...nel.org,
	pavel@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	linux-leds@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Qing-wu.Li@...ca-geosystems.com.cn
Cc: bsp-development.geo@...ca-geosystems.com
Subject: [PATCH V5 1/2] dt-bindings: leds: pwm: add enable-gpios property

Some PWM LED driver chips like TPS92380 and LT3743 require a separate
enable signal in addition to PWM control. Add this property to allow
device trees to specify such GPIO, which will be controlled automatically
by the driver based on the LED brightness state.

Link: https://www.ti.com/lit/gpn/tps92380
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/3743fe.pdf

Signed-off-by: LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
---
 Documentation/devicetree/bindings/leds/leds-pwm.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
index 61b97e8bc36d0..6c4fcefbe25f9 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -40,6 +40,13 @@ patternProperties:
           initialization. If the option is not set then max brightness is used.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      enable-gpios:
+        description:
+          GPIO for LED hardware enable control. Set active when brightness is
+          non-zero and inactive when brightness is zero.
+          The GPIO default state follows the "default-state" property.
+        maxItems: 1
+
     required:
       - pwms
       - max-brightness
-- 
2.43.0