linux-kernel - [PATCH net-next v7 4/4] net: phy: bcm54811: PHY initialization

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250708090140.61355-5-kamilh@axis.com>
Date: Tue, 8 Jul 2025 11:01:40 +0200
From: Kamil Horák - 2N <kamilh@...s.com>
To: <florian.fainelli@...adcom.com>, <bcm-kernel-feedback-list@...adcom.com>,
	<andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
	<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
	<pabeni@...hat.com>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <kamilh@...s.com>, <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <robh@...nel.org>, <andrew+netdev@...n.ch>,
	<horms@...nel.org>, <corbet@....net>, <linux-doc@...r.kernel.org>
Subject: [PATCH net-next v7 4/4] net: phy: bcm54811: PHY initialization

Reset the bit 12 in PHY's LRE Control register upon initialization.
According to the datasheet, this bit must be written to zero after
every device reset.

Signed-off-by: Kamil Horák - 2N <kamilh@...s.com>
Reviewed-by: Florian Fainelli <florian.fainelli@...adcom.com>
---
 drivers/net/phy/broadcom.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 8547983bd72f..a60e58ef90c4 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -667,7 +667,7 @@ static int bcm5481x_read_abilities(struct phy_device *phydev)
 {
 	struct device_node *np = phydev->mdio.dev.of_node;
 	struct bcm54xx_phy_priv *priv = phydev->priv;
-	int i, val, err;
+	int i, val, err, aneg;
 
 	for (i = 0; i < ARRAY_SIZE(bcm54811_linkmodes); i++)
 		linkmode_clear_bit(bcm54811_linkmodes[i], phydev->supported);
@@ -688,9 +688,19 @@ static int bcm5481x_read_abilities(struct phy_device *phydev)
 		if (val < 0)
 			return val;
 
+		/* BCM54811 is not capable of LDS but the corresponding bit
+		 * in LRESR is set to 1 and marked "Ignore" in the datasheet.
+		 * So we must read the bcm54811 as unable to auto-negotiate
+		 * in BroadR-Reach mode.
+		 */
+		if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811)
+			aneg = 0;
+		else
+			aneg = val & LRESR_LDSABILITY;
+
 		linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
 				 phydev->supported,
-				 val & LRESR_LDSABILITY);
+				 aneg);
 		linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT,
 				 phydev->supported,
 				 val & LRESR_100_1PAIR);
@@ -747,8 +757,15 @@ static int bcm54811_config_aneg(struct phy_device *phydev)
 
 	/* Aneg firstly. */
 	if (priv->brr_mode) {
-		/* BCM54811 is only capable of autonegotiation in IEEE mode */
-		phydev->autoneg = 0;
+		/* BCM54811 is only capable of autonegotiation in IEEE mode.
+		 * In BroadR-Reach mode, disable the Long Distance Signaling,
+		 * the BRR mode autoneg as supported in other Broadcom PHYs.
+		 * This bit is marked as "Reserved" and "Default 1, must be
+		 *  written to 0 after every device reset" in the datasheet.
+		 */
+		ret = phy_modify(phydev, MII_BCM54XX_LRECR, LRECR_LDSEN, 0);
+		if (ret < 0)
+			return ret;
 		ret = bcm_config_lre_aneg(phydev, false);
 	} else {
 		ret = genphy_config_aneg(phydev);
-- 
2.39.5