linux-kernel - Re: [PATCH 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater: Document qcom,tune-res-fsdif

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <DB7FBNQ0TYFZ.3GGPN8XXJXGRW@fairphone.com>
Date: Wed, 09 Jul 2025 11:40:42 +0200
From: "Luca Weiss" <luca.weiss@...rphone.com>
To: "Luca Weiss" <luca.weiss@...rphone.com>, "Krzysztof Kozlowski"
 <krzk@...nel.org>
Cc: "Vinod Koul" <vkoul@...nel.org>, "Kishon Vijay Abraham I"
 <kishon@...nel.org>, "Rob Herring" <robh@...nel.org>, "Krzysztof Kozlowski"
 <krzk+dt@...nel.org>, "Conor Dooley" <conor+dt@...nel.org>, "Abel Vesa"
 <abel.vesa@...aro.org>, <~postmarketos/upstreaming@...ts.sr.ht>,
 <phone-devel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
 <linux-phy@...ts.infradead.org>, <devicetree@...r.kernel.org>,
 <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/4] dt-bindings: phy: qcom,snps-eusb2-repeater:
 Document qcom,tune-res-fsdif

Hi Krzysztof,

On Tue Jul 8, 2025 at 10:31 AM CEST, Luca Weiss wrote:
> On Tue Jul 8, 2025 at 10:21 AM CEST, Krzysztof Kozlowski wrote:
>> On Tue, Jul 08, 2025 at 10:13:24AM +0200, Krzysztof Kozlowski wrote:
>>> On Wed, Jun 25, 2025 at 11:14:56AM +0200, Luca Weiss wrote:
>>> > Document the FS Differential TX Output Resistance Tuning value found on
>>> > the eUSB2 repeater on Qualcomm PMICs.
>>> > 
>>> > Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
>>> > ---
>>> >  Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml | 6 ++++++
>>> >  1 file changed, 6 insertions(+)
>>> > 
>>> > diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
>>> > index 27f064a71c9fb8cb60e8333fb285f0510a4af94f..6bfd11657e2992735998063b3ca390e04a03930d 100644
>>> > --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
>>> > +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
>>> > @@ -52,6 +52,12 @@ properties:
>>> >      minimum: 0
>>> >      maximum: 7
>>> >  
>>> > +  qcom,tune-res-fsdif:
>>> > +    $ref: /schemas/types.yaml#/definitions/uint8
>>> > +    description: FS Differential TX Output Resistance Tuning
>>> 
>>> Resistance is in Ohms, tuning could be in dB, so I wonder what are the
>>> actual units here. Neither commit msg nor this description helps me to
>>> understand that.
>>
>> I checked and the values are in Ohms.
>
> Yes it's Ohms but not 0x00 = 0 ohms, and it's also an offset in ohms
> from the nominal value according to the Hardware Register Description I
> have, e.g. 0x7 = -12.1ohm from the default
>
> I can try and create bindings using these Ohm offset values, I didn't
> worry about it too much since the other tuning values in these bindings
> are also just register values, presumably from before Konrad had access
> to the docs.

I've taken some more looks, and checked how similar tuning is handled in
qcom,usb-snps-femto-v2.yaml and phy-qcom-snps-femto-v2.c, and changing up
the concept of tuning in the eUSB2-repeater bindings+driver is not a
trivial task.

Since this is adding just one more property in-line with the already
supported properties in the bindings+driver, can we get this in as-is,
and deprecate all 4 qcom,tune-* properties later with a replacement that
describes the values better?

We have enough people at Qualcomm by now that should be able to do that,
and have the required resources to answer any potential questions.

Regards
Luca