[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250709104210.3807203-3-o.rempel@pengutronix.de>
Date: Wed, 9 Jul 2025 12:42:09 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
kernel@...gutronix.de,
linux-kernel@...r.kernel.org,
Russell King <linux@...linux.org.uk>,
netdev@...r.kernel.org,
Andre Edich <andre.edich@...rochip.com>,
Lukas Wunner <lukas@...ner.de>
Subject: [PATCH net v2 2/3] net: phy: allow drivers to disable polling via get_next_update_time()
Some PHY drivers can reliably report link-down events via IRQs,
but may fail to generate reliable link-up IRQs. To support such
cases, polling is often needed - but only selectively.
Extend get_next_update_time() so drivers can return PHY_STATE_IRQ
to indicate that polling is not needed and IRQs are sufficient.
This allows finer control over PHY state machine behavior.
Introduce PHY_STATE_IRQ (UINT_MAX) as a sentinel value, and move
PHY_STATE_TIME to phy.h to allow consistent use across the codebase.
This change complements the previous patch enabling polling when
get_next_update_time() is present.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
changes v2:
- this patch is added
---
drivers/net/phy/phy.c | 18 +++++++++++-------
include/linux/phy.h | 10 +++++++++-
2 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 13df28445f02..faf9a48d3b6f 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -39,8 +39,6 @@
#include "phylib-internal.h"
#include "phy-caps.h"
-#define PHY_STATE_TIME HZ
-
#define PHY_STATE_STR(_state) \
case PHY_##_state: \
return __stringify(_state); \
@@ -1575,16 +1573,22 @@ static enum phy_state_work _phy_state_machine(struct phy_device *phydev)
phy_process_state_change(phydev, old_state);
/* Only re-schedule a PHY state machine change if we are polling the
- * PHY, if PHY_MAC_INTERRUPT is set, then we will be moving
- * between states from phy_mac_interrupt().
+ * PHY. If PHY_MAC_INTERRUPT is set or get_next_update_time() returns
+ * PHY_STATE_IRQ, then we rely on interrupts for state changes.
*
* In state PHY_HALTED the PHY gets suspended, so rescheduling the
* state machine would be pointless and possibly error prone when
* called from phy_disconnect() synchronously.
*/
- if (phy_polling_mode(phydev) && phy_is_started(phydev))
- phy_queue_state_machine(phydev,
- phy_get_next_update_time(phydev));
+ if (phy_polling_mode(phydev) && phy_is_started(phydev)) {
+ unsigned int next_time = phy_get_next_update_time(phydev);
+
+ /* Drivers returning PHY_STATE_IRQ opt out of polling.
+ * Use IRQ-only mode by not re-queuing the state machine.
+ */
+ if (next_time != PHY_STATE_IRQ)
+ phy_queue_state_machine(phydev, next_time);
+ }
return state_work;
}
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 3d4e5c41235e..d92258e3ac1a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -66,6 +66,10 @@ extern const int phy_basic_ports_array[3];
#define PHY_ALWAYS_CALL_SUSPEND 0x00000008
#define MDIO_DEVICE_IS_PHY 0x80000000
+#define PHY_STATE_TIME HZ
+/* disable polling, rely on IRQs */
+#define PHY_STATE_IRQ UINT_MAX
+
/**
* enum phy_interface_t - Interface Mode definitions
*
@@ -1257,7 +1261,11 @@ struct phy_driver {
* dynamically adjust polling intervals based on link state or other
* conditions.
*
- * Returns the time in jiffies until the next update event.
+ * Returning PHY_STATE_IRQ disables polling and indicates that the
+ * driver relies solely on IRQs for link state changes.
+ *
+ * Returns the time in jiffies until the next update event, or
+ * PHY_STATE_IRQ to disable polling.
*/
unsigned int (*get_next_update_time)(struct phy_device *dev);
};
--
2.39.5
Powered by blists - more mailing lists