[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250709112658.1987608-3-ioana.ciornei@nxp.com>
Date: Wed, 9 Jul 2025 14:26:51 +0300
From: Ioana Ciornei <ioana.ciornei@....com>
To: devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Shawn Guo <shawnguo@...nel.org>,
Michael Walle <mwalle@...nel.org>,
Lee Jones <lee@...nel.org>,
Frank Li <Frank.Li@....com>
Subject: [PATCH 2/9] dt-bindings: fsl,fpga-qixis-i2c: extend support to also cover the LX2160ARDB FPGA
Extend the list of supported compatible strings with fsl,lx2160ardb-fpga.
Since the register map exposed by the LX2160ARDB's FPGA also contains
two GPIO controllers, accept the necessary GPIO pattern property. At the
same time, add the #address-cells and #size-cells properties as valid
ones.
This is needed because when defining child devices such as the GPIO
controller described in the added example, the child device needs a the
reg property to properly identify its register location.
Signed-off-by: Ioana Ciornei <ioana.ciornei@....com>
---
.../bindings/board/fsl,fpga-qixis-i2c.yaml | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
index 28b37772fb65..e8981f974210 100644
--- a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
+++ b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml
@@ -22,6 +22,13 @@ properties:
- fsl,lx2160aqds-fpga
- const: fsl,fpga-qixis-i2c
- const: simple-mfd
+ - const: fsl,lx2160ardb-fpga
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
interrupts:
maxItems: 1
@@ -32,6 +39,10 @@ properties:
mux-controller:
$ref: /schemas/mux/reg-mux.yaml
+patternProperties:
+ "^gpio(@[0-9a-f]+)?$":
+ $ref: /schemas/gpio/fsl,fpga-gpio.yaml
+
required:
- compatible
- reg
@@ -68,3 +79,27 @@ examples:
};
};
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ board-control@66 {
+ compatible = "fsl,lx2160ardb-fpga";
+ reg = <0x66>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@19 {
+ compatible = "fsl,lx2160ardb-fpga-gpio-sfp2";
+ reg = <0x19>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "SFP2_TX_EN", "",
+ "", "",
+ "SFP2_RX_LOS", "SFP2_TX_FAULT",
+ "", "SFP2_MOD_ABS";
+ };
+ };
+ };
--
2.25.1
Powered by blists - more mailing lists