| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250710002047.1573841-4-ksk4725@coasia.com>
Date: Thu, 10 Jul 2025 09:20:33 +0900
From: ksk4725@...sia.com
To: Jesper Nilsson <jesper.nilsson@...s.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Alim Akhtar <alim.akhtar@...sung.com>,
Linus Walleij <linus.walleij@...aro.org>,
Tomasz Figa <tomasz.figa@...il.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Arnd Bergmann <arnd@...db.de>
Cc: kenkim <kenkim@...sia.com>,
Jongshin Park <pjsin865@...sia.com>,
GunWoo Kim <gwk1013@...sia.com>,
SeonGu Kang <ksk4725@...sia.com>,
HaGyeong Kim <hgkim05@...sia.com>,
GyoungBo Min <mingyoungbo@...sia.com>,
SungMin Park <smn1196@...sia.com>,
Pankaj Dubey <pankaj.dubey@...sung.com>,
Shradha Todi <shradha.t@...sung.com>,
Ravi Patel <ravi.patel@...sung.com>,
Inbaraj E <inbaraj.e@...sung.com>,
Swathi K S <swathi.ks@...sung.com>,
Hrishikesh <hrishikesh.d@...sung.com>,
Dongjin Yang <dj76.yang@...sung.com>,
Sang Min Kim <hypmean.kim@...sung.com>,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...s.com,
linux-clk@...r.kernel.org,
devicetree@...r.kernel.org,
linux-gpio@...r.kernel.org,
soc@...ts.linux.dev
Subject: [PATCH 03/16] clk: samsung: Add clock PLL support for ARTPEC-8 SoC
From: Hakyeong Kim <hgkim05@...sia.com>
Add below clock PLL support for ARTPEC-8 SoC platform:
- pll_1017x
- pll_1031x
Signed-off-by: Ravi Patel <ravi.patel@...sung.com>
Signed-off-by: Hakyeong Kim <hgkim05@...sia.com>
---
drivers/clk/samsung/clk-pll.c | 129 +++++++++++++++++++++++++++++++++-
drivers/clk/samsung/clk-pll.h | 2 +
2 files changed, 130 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index fe8abe442c51..3337483ff8b8 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -17,6 +17,7 @@
#include "clk.h"
#include "clk-pll.h"
+#define PLL_TIMEOUT_MS 10U
#define PLL_TIMEOUT_US 20000U
#define PLL_TIMEOUT_LOOPS 1000000U
@@ -273,7 +274,7 @@ static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
}
/* Set PLL lock time. */
- if (pll->type == pll_142xx)
+ if (pll->type == pll_142xx || pll->type == pll_1017x)
writel_relaxed(rate->pdiv * PLL142XX_LOCK_FACTOR,
pll->lock_reg);
else
@@ -1325,6 +1326,125 @@ static const struct clk_ops samsung_pll531x_clk_ops = {
.recalc_rate = samsung_pll531x_recalc_rate,
};
+/*
+ * PLL1031X Clock Type
+ */
+#define PLL1031X_LOCK_FACTOR (500)
+
+#define PLL1031X_MDIV_MASK (0x3ff)
+#define PLL1031X_PDIV_MASK (0x3f)
+#define PLL1031X_SDIV_MASK (0x7)
+#define PLL1031X_MDIV_SHIFT (16)
+#define PLL1031X_PDIV_SHIFT (8)
+#define PLL1031X_SDIV_SHIFT (0)
+
+#define PLL1031X_KDIV_MASK (0xffff)
+#define PLL1031X_KDIV_SHIFT (0)
+#define PLL1031X_MFR_MASK (0x3f)
+#define PLL1031X_MRR_MASK (0x1f)
+#define PLL1031X_MFR_SHIFT (16)
+#define PLL1031X_MRR_SHIFT (24)
+
+static unsigned long samsung_pll1031x_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con3;
+ u64 fvco = parent_rate;
+
+ pll_con0 = readl_relaxed(pll->con_reg);
+ pll_con3 = readl_relaxed(pll->con_reg + 0xc);
+ mdiv = (pll_con0 >> PLL1031X_MDIV_SHIFT) & PLL1031X_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL1031X_PDIV_SHIFT) & PLL1031X_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL1031X_SDIV_SHIFT) & PLL1031X_SDIV_MASK;
+ kdiv = (pll_con3 & PLL1031X_KDIV_MASK);
+
+ fvco *= (mdiv << PLL1031X_MDIV_SHIFT) + kdiv;
+ do_div(fvco, (pdiv << sdiv));
+ fvco >>= PLL1031X_MDIV_SHIFT;
+
+ return (unsigned long)fvco;
+}
+
+static bool samsung_pll1031x_mpk_change(u32 pll_con0, u32 pll_con3,
+ const struct samsung_pll_rate_table *rate)
+{
+ u32 old_mdiv, old_pdiv, old_kdiv;
+
+ old_mdiv = (pll_con0 >> PLL1031X_MDIV_SHIFT) & PLL1031X_MDIV_MASK;
+ old_pdiv = (pll_con0 >> PLL1031X_PDIV_SHIFT) & PLL1031X_PDIV_MASK;
+ old_kdiv = (pll_con3 >> PLL1031X_KDIV_SHIFT) & PLL1031X_KDIV_MASK;
+
+ return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv ||
+ old_kdiv != rate->kdiv);
+}
+
+static int samsung_pll1031x_set_rate(struct clk_hw *hw, unsigned long drate,
+ unsigned long prate)
+{
+ struct samsung_clk_pll *pll = to_clk_pll(hw);
+ const struct samsung_pll_rate_table *rate;
+ u32 con0, con3;
+
+ /* Get required rate settings from table */
+ rate = samsung_get_pll_settings(pll, drate);
+ if (!rate) {
+ pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+ drate, clk_hw_get_name(hw));
+ return -EINVAL;
+ }
+
+ con0 = readl_relaxed(pll->con_reg);
+ con3 = readl_relaxed(pll->con_reg + 0xc);
+
+ if (!(samsung_pll1031x_mpk_change(con0, con3, rate))) {
+ /* If only s change, change just s value only */
+ con0 &= ~(PLL1031X_SDIV_MASK << PLL1031X_SDIV_SHIFT);
+ con0 |= rate->sdiv << PLL1031X_SDIV_SHIFT;
+ writel_relaxed(con0, pll->con_reg);
+
+ return 0;
+ }
+
+ /* Set PLL lock time. */
+ writel_relaxed(rate->pdiv * PLL1031X_LOCK_FACTOR, pll->lock_reg);
+
+ /* Set PLL M, P, and S values. */
+ con0 &= ~((PLL1031X_MDIV_MASK << PLL1031X_MDIV_SHIFT) |
+ (PLL1031X_PDIV_MASK << PLL1031X_PDIV_SHIFT) |
+ (PLL1031X_SDIV_MASK << PLL1031X_SDIV_SHIFT));
+
+ con0 |= (rate->mdiv << PLL1031X_MDIV_SHIFT) |
+ (rate->pdiv << PLL1031X_PDIV_SHIFT) |
+ (rate->sdiv << PLL1031X_SDIV_SHIFT);
+
+ /* Set PLL K, MFR and MRR values. */
+ con3 = readl_relaxed(pll->con_reg + 0xc);
+ con3 &= ~((PLL1031X_KDIV_MASK << PLL1031X_KDIV_SHIFT) |
+ (PLL1031X_MFR_MASK << PLL1031X_MFR_SHIFT) |
+ (PLL1031X_MRR_MASK << PLL1031X_MRR_SHIFT));
+ con3 |= (rate->kdiv << PLL1031X_KDIV_SHIFT) |
+ (rate->mfr << PLL1031X_MFR_SHIFT) |
+ (rate->mrr << PLL1031X_MRR_SHIFT);
+
+ /* Write configuration to PLL */
+ writel_relaxed(con0, pll->con_reg);
+ writel_relaxed(con3, pll->con_reg + 0xc);
+
+ /* Wait for PLL lock if the PLL is enabled */
+ return samsung_pll_lock_wait(pll, BIT(pll->lock_offs));
+}
+
+static const struct clk_ops samsung_pll1031x_clk_ops = {
+ .recalc_rate = samsung_pll1031x_recalc_rate,
+ .round_rate = samsung_pll_round_rate,
+ .set_rate = samsung_pll1031x_set_rate,
+};
+
+static const struct clk_ops samsung_pll1031x_clk_min_ops = {
+ .recalc_rate = samsung_pll1031x_recalc_rate,
+};
+
static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
const struct samsung_pll_clock *pll_clk)
{
@@ -1373,6 +1493,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
case pll_1451x:
case pll_1452x:
case pll_142xx:
+ case pll_1017x:
pll->enable_offs = PLL35XX_ENABLE_SHIFT;
pll->lock_offs = PLL35XX_LOCK_STAT_SHIFT;
if (!pll->rate_table)
@@ -1468,6 +1589,12 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
case pll_4311:
init.ops = &samsung_pll531x_clk_ops;
break;
+ case pll_1031x:
+ if (!pll->rate_table)
+ init.ops = &samsung_pll1031x_clk_min_ops;
+ else
+ init.ops = &samsung_pll1031x_clk_ops;
+ break;
default:
pr_warn("%s: Unknown pll type for pll clk %s\n",
__func__, pll_clk->name);
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index e9a5f8e0e0a3..6c8bb7f26da5 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -49,6 +49,8 @@ enum samsung_pll_type {
pll_0718x,
pll_0732x,
pll_4311,
+ pll_1017x,
+ pll_1031x,
};
#define PLL_RATE(_fin, _m, _p, _s, _k, _ks) \
--
2.34.1
Powered by blists - more mailing lists