linux-kernel - [PATCH] arm64: dts: ti: k3-am62a7-sk: add boot phase tags

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250709-62a-uboot-cleanup-v1-1-70f8e6cde719@ti.com>
Date: Wed, 9 Jul 2025 19:08:56 -0500
From: Bryan Brattlof <bb@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
        Tero
 Kristo <kristo@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof
 Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Bryan Brattlof <bb@...com>
Subject: [PATCH] arm64: dts: ti: k3-am62a7-sk: add boot phase tags

The 'bootph-all' tag was added to the dt-schema to describe the various
nodes used during the different phases of bootup with DT. Add the
bootph-all tag to all nodes that are used during the early stages of
bootup by the bootloaders.

This includes the console UART along with the SD and eMMC nodes and its
required regulators for the 3v3 to 1v8 transition and the various nodes
for Ethernet booting.

Signed-off-by: Bryan Brattlof <bb@...com>
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index f11284b3fe8e23b4c48d8d2f3a7202e80dc57370..bb565c52dc2c6365aac1e3a62461de4aef79c51b 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -36,6 +36,7 @@ memory@...00000 {
 		/* 4G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
 		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+		bootph-all;
 	};
 
 	reserved-memory {
@@ -151,6 +152,7 @@ vdd_mmc1: regulator-3 {
 		regulator-boot-on;
 		enable-active-high;
 		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		bootph-all;
 	};
 
 	vcc_3v3_sys: regulator-4 {
@@ -297,6 +299,7 @@ main_uart0_pins_default: main-uart0-default-pins {
 			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
 			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
 		>;
+		bootph-all;
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
@@ -320,6 +323,7 @@ main_i2c1_pins_default: main-i2c1-default-pins {
 			AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
 			AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
 		>;
+		bootph-all;
 	};
 
 	main_i2c2_pins_default: main-i2c2-default-pins {
@@ -356,6 +360,7 @@ AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
 			AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
 			AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
 		>;
+		bootph-all;
 	};
 
 	usr_led_pins_default: usr-led-default-pins {
@@ -375,6 +380,7 @@ main_mdio1_pins_default: main-mdio1-default-pins {
 			AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
 			AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	main_rgmii1_pins_default: main-rgmii1-default-pins {
@@ -392,6 +398,7 @@ AM62AX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */
 			AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */
 			AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	main_mcasp1_pins_default: main-mcasp1-default-pins {
@@ -572,6 +579,7 @@ exp1: gpio@22 {
 		#interrupt-cells = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+		bootph-all;
 
 		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
 				   "BT_EN_SOC", "MMC1_SD_EN",
@@ -675,10 +683,12 @@ &sdhci1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;
+	bootph-all;
 };
 
 &main_gpio0 {
 	status = "okay";
+	bootph-all;
 };
 
 &main_gpio1 {
@@ -693,6 +703,7 @@ &main_uart0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
+	bootph-all;
 };
 
 /* Main UART1 is used for TIFS firmware logs */
@@ -737,12 +748,21 @@ &cpsw3g {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>;
+
+	ethernet-ports {
+		bootph-all;
+	};
+};
+
+&phy_gmii_sel {
+	bootph-all;
 };
 
 &cpsw_port1 {
 	status = "okay";
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
+	bootph-all;
 };
 
 &cpsw_port2 {
@@ -759,6 +779,7 @@ cpsw3g_phy0: ethernet-phy@0 {
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
+		bootph-all;
 	};
 };
 

---
base-commit: 3b08f8a34a2061d89a2411d04a675b3860d4f9cc
change-id: 20250623-62a-uboot-cleanup-b80e6952f91d

Best regards,
-- 
Bryan Brattlof <bb@...com>