| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <babf831c-9b60-42a2-a5b7-55f699d4b3b6@gmail.com>
Date: Fri, 11 Jul 2025 22:38:44 +0300
From: Laurentiu Tudor <tudor.laurentiu.oss@...il.com>
To: Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] arm64: dts: qcom: Add support for X1E80100 Dell
Inspirion 14 Plus 7441
On 4/24/25 02:53, Bryan O'Donoghue wrote:
> Add support for Dell Inspiron 14p 7441.
>
> Working:
> - WiFi
> - Bluetooth
> - USB Type-C x 2
> - USB Type-A
> - USB Finger Print reader
> - Display
> - NVME
> - Keyboard
> - Touchpad
>
> WIP not included:
> - Audio
> - Camera
> - Embedded Controller
> - Battery
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../qcom/x1e80100-dell-inspirion-14-plus-7441.dts | 1429 ++++++++++++++++++++
Guessing this patch is pretty much obsolete but anyways, maybe
s/inspirion/inspiron? Thanks.
---
Best Regards, Laurentiu
> 2 files changed, 1430 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index adb4d026bcc4b24d73de92e204db8d525b0770e6..e6582d9811253525baae0c590db5c9620677efb4 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -298,6 +298,7 @@ dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e78100-lenovo-thinkpad-t14s-oled.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-asus-vivobook-s15.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-inspirion-14-plus-7441.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-dell-xps13-9345.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb
> dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspirion-14-plus-7441.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspirion-14-plus-7441.dts
> new file mode 100644
> index 0000000000000000000000000000000000000000..c38a65598637f74e2939b5491028c1e15d573d00
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspirion-14-plus-7441.dts
> @@ -0,0 +1,1429 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@...il.com>
> + * Copyright (c) 2025 Bryan O'Donoghue <bryan.odonoghue@...aro.org>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +
> +#include "x1e80100.dtsi"
> +#include "x1e80100-pmics.dtsi"
> +
> +/ {
> + model = "Dell Inspirion 14 Plus 7441";
> + compatible = "dell,inspiron-14-plus-7441", "qcom,x1e80100";
> + chassis-type = "laptop";
> +
> + aliases {
> + serial0 = &uart14;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-0 = <&hall_int_n_default>;
> + pinctrl-names = "default";
> +
> + switch-lid {
> + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
> + linux,input-type = <EV_SW>;
> + linux,code = <SW_LID>;
> + wakeup-source;
> + wakeup-event-action = <EV_ACT_DEASSERTED>;
> + };
> + };
> +
> + pmic-glink {
> + compatible = "qcom,x1e80100-pmic-glink",
> + "qcom,sm8550-pmic-glink",
> + "qcom,pmic-glink";
> + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> + <&tlmm 123 GPIO_ACTIVE_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Display-adjacent port */
> + connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pmic_glink_ss0_hs_in: endpoint {
> + remote-endpoint = <&usb_1_ss0_dwc3_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + pmic_glink_ss0_ss_in: endpoint {
> + remote-endpoint = <&retimer_ss0_ss_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + pmic_glink_ss0_con_sbu_in: endpoint {
> + remote-endpoint = <&retimer_ss0_con_sbu_out>;
> + };
> + };
> + };
> + };
> +
> + /* User-adjacent port */
> + connector@1 {
> + compatible = "usb-c-connector";
> + reg = <1>;
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pmic_glink_ss1_hs_in: endpoint {
> + remote-endpoint = <&usb_1_ss1_dwc3_hs>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + pmic_glink_ss1_ss_in: endpoint {
> + remote-endpoint = <&retimer_ss1_ss_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + pmic_glink_ss1_con_sbu_in: endpoint {
> + remote-endpoint = <&retimer_ss1_con_sbu_out>;
> + };
> + };
> + };
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&cam_indicator_en>;
> +
> + led-camera-indicator {
> + label = "white:camera-indicator";
> + function = LED_FUNCTION_INDICATOR;
> + color = <LED_COLOR_ID_WHITE>;
> + gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "none";
> + default-state = "off";
> + panic-indicator;
> + };
> + };
> +
> + reserved-memory {
> + linux,cma {
> + compatible = "shared-dma-pool";
> + size = <0x0 0x8000000>;
> + reusable;
> + linux,cma-default;
> + };
> + };
> +
> + vreg_cam_1p8: regulator-cam-1p8 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_CAM_1P8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&cam_ldo_en>;
> + pinctrl-names = "default";
> + };
> +
> + vreg_edp_3p3: regulator-edp-3p3 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_EDP_3P3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&edp_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + vreg_nvme: regulator-nvme {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_NVME_3P3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&nvme_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_RTMR0_1P15";
> + regulator-min-microvolt = <1150000>;
> + regulator-max-microvolt = <1150000>;
> +
> + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_RTMR0_1P8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&usb0_1p8_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_RTMR0_3P3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&usb0_3p3_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_RTMR1_1P15";
> + regulator-min-microvolt = <1150000>;
> + regulator-max-microvolt = <1150000>;
> +
> + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_RTMR1_1P8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_RTMR1_3P3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + vph_pwr: regulator-vph-pwr {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vreg_wcn_3p3: regulator-wcn-3p3 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_WCN_3P3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + pinctrl-0 = <&wcn_sw_en>;
> + pinctrl-names = "default";
> +
> + regulator-boot-on;
> + };
> +
> + /*
> + * TODO: These two regulators are actually part of the removable M.2
> + * card and not the CRD mainboard. Need to describe this differently.
> + * Functionally it works correctly, because all we need to do is to
> + * turn on the actual 3.3V supply above.
> + */
> + vreg_wcn_0p95: regulator-wcn-0p95 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_WCN_0P95";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <950000>;
> +
> + vin-supply = <&vreg_wcn_3p3>;
> + };
> +
> + vreg_wcn_1p9: regulator-wcn-1p9 {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "VREG_WCN_1P9";
> + regulator-min-microvolt = <1900000>;
> + regulator-max-microvolt = <1900000>;
> +
> + vin-supply = <&vreg_wcn_3p3>;
> + };
> +
> + wcn7850-pmu {
> + compatible = "qcom,wcn7850-pmu";
> +
> + vdd-supply = <&vreg_wcn_0p95>;
> + vddio-supply = <&vreg_l15b_1p8>;
> + vddaon-supply = <&vreg_wcn_0p95>;
> + vdddig-supply = <&vreg_wcn_0p95>;
> + vddrfa1p2-supply = <&vreg_wcn_1p9>;
> + vddrfa1p8-supply = <&vreg_wcn_1p9>;
> +
> + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
> + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-0 = <&wcn_wlan_bt_en>;
> + pinctrl-names = "default";
> +
> + regulators {
> + vreg_pmu_rfa_cmn: ldo0 {
> + regulator-name = "vreg_pmu_rfa_cmn";
> + };
> +
> + vreg_pmu_aon_0p59: ldo1 {
> + regulator-name = "vreg_pmu_aon_0p59";
> + };
> +
> + vreg_pmu_wlcx_0p8: ldo2 {
> + regulator-name = "vreg_pmu_wlcx_0p8";
> + };
> +
> + vreg_pmu_wlmx_0p85: ldo3 {
> + regulator-name = "vreg_pmu_wlmx_0p85";
> + };
> +
> + vreg_pmu_btcmx_0p85: ldo4 {
> + regulator-name = "vreg_pmu_btcmx_0p85";
> + };
> +
> + vreg_pmu_rfa_0p8: ldo5 {
> + regulator-name = "vreg_pmu_rfa_0p8";
> + };
> +
> + vreg_pmu_rfa_1p2: ldo6 {
> + regulator-name = "vreg_pmu_rfa_1p2";
> + };
> +
> + vreg_pmu_rfa_1p8: ldo7 {
> + regulator-name = "vreg_pmu_rfa_1p8";
> + };
> +
> + vreg_pmu_pcie_0p9: ldo8 {
> + regulator-name = "vreg_pmu_pcie_0p9";
> + };
> +
> + vreg_pmu_pcie_1p8: ldo9 {
> + regulator-name = "vreg_pmu_pcie_1p8";
> + };
> + };
> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm8550-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vdd-bob1-supply = <&vph_pwr>;
> + vdd-bob2-supply = <&vph_pwr>;
> + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
> + vdd-l2-l13-l14-supply = <&vreg_bob1>;
> + vdd-l5-l16-supply = <&vreg_bob1>;
> + vdd-l6-l7-supply = <&vreg_bob2>;
> + vdd-l8-l9-supply = <&vreg_bob1>;
> + vdd-l12-supply = <&vreg_s5j_1p2>;
> + vdd-l15-supply = <&vreg_s4c_1p8>;
> + vdd-l17-supply = <&vreg_bob2>;
> +
> + vreg_bob1: bob1 {
> + regulator-name = "vreg_bob1";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob2: bob2 {
> + regulator-name = "vreg_bob2";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1b_1p8: ldo1 {
> + regulator-name = "vreg_l1b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b_3p0: ldo2 {
> + regulator-name = "vreg_l2b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4b_1p8: ldo4 {
> + regulator-name = "vreg_l4b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b_2p8: ldo7 {
> + regulator-name = "vreg_l7b_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8b_3p0: ldo8 {
> + regulator-name = "vreg_l8b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12b_1p2: ldo12 {
> + regulator-name = "vreg_l12b_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13b_3p0: ldo13 {
> + regulator-name = "vreg_l13b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l14b_3p0: ldo14 {
> + regulator-name = "vreg_l14b_3p0";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15b_1p8: ldo15 {
> + regulator-name = "vreg_l15b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-l1-supply = <&vreg_s5j_1p2>;
> + vdd-l2-supply = <&vreg_s1f_0p7>;
> + vdd-l3-supply = <&vreg_s1f_0p7>;
> + vdd-s4-supply = <&vph_pwr>;
> +
> + vreg_s4c_1p8: smps4 {
> + regulator-name = "vreg_s4c_1p8";
> + regulator-min-microvolt = <1856000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1c_1p2: ldo1 {
> + regulator-name = "vreg_l1c_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2c_0p8: ldo2 {
> + regulator-name = "vreg_l2c_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3c_0p8: ldo3 {
> + regulator-name = "vreg_l3c_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-2 {
> + compatible = "qcom,pmc8380-rpmh-regulators";
> + qcom,pmic-id = "d";
> +
> + vdd-l1-supply = <&vreg_s1f_0p7>;
> + vdd-l2-supply = <&vreg_s1f_0p7>;
> + vdd-l3-supply = <&vreg_s4c_1p8>;
> + vdd-s1-supply = <&vph_pwr>;
> +
> + vreg_l1d_0p8: ldo1 {
> + regulator-name = "vreg_l1d_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2d_0p9: ldo2 {
> + regulator-name = "vreg_l2d_0p9";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3d_1p8: ldo3 {
> + regulator-name = "vreg_l3d_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-3 {
> + compatible = "qcom,pmc8380-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-l2-supply = <&vreg_s1f_0p7>;
> + vdd-l3-supply = <&vreg_s5j_1p2>;
> +
> + vreg_l2e_0p8: ldo2 {
> + regulator-name = "vreg_l2e_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3e_1p2: ldo3 {
> + regulator-name = "vreg_l3e_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-4 {
> + compatible = "qcom,pmc8380-rpmh-regulators";
> + qcom,pmic-id = "f";
> +
> + vdd-l1-supply = <&vreg_s5j_1p2>;
> + vdd-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-supply = <&vreg_s5j_1p2>;
> + vdd-s1-supply = <&vph_pwr>;
> +
> + vreg_s1f_0p7: smps1 {
> + regulator-name = "vreg_s1f_0p7";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-6 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "i";
> +
> + vdd-l1-supply = <&vreg_s4c_1p8>;
> + vdd-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-supply = <&vreg_s1f_0p7>;
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> +
> + vreg_l1i_1p8: ldo1 {
> + regulator-name = "vreg_l1i_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2i_1p2: ldo2 {
> + regulator-name = "vreg_l2i_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3i_0p8: ldo3 {
> + regulator-name = "vreg_l3i_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-7 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "j";
> +
> + vdd-l1-supply = <&vreg_s1f_0p7>;
> + vdd-l2-supply = <&vreg_s5j_1p2>;
> + vdd-l3-supply = <&vreg_s1f_0p7>;
> + vdd-s5-supply = <&vph_pwr>;
> +
> + vreg_s5j_1p2: smps5 {
> + regulator-name = "vreg_s5j_1p2";
> + regulator-min-microvolt = <1256000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1j_0p8: ldo1 {
> + regulator-name = "vreg_l1j_0p8";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2j_1p2: ldo2 {
> + regulator-name = "vreg_l2j_1p2";
> + regulator-min-microvolt = <1256000>;
> + regulator-max-microvolt = <1256000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3j_0p8: ldo3 {
> + regulator-name = "vreg_l3j_0p8";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&gpu {
> + status = "okay";
> +
> + zap-shader {
> + firmware-name = "qcom/x1e80100/Dell/inspiron-14-plus-7441/qcdxkmsuc8380.mbn";
> + };
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + keyboard@5 {
> + compatible = "hid-over-i2c";
> + reg = <0x5>;
> +
> + hid-descr-addr = <0x20>;
> + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-0 = <&kybd_default>;
> + pinctrl-names = "default";
> +
> + wakeup-source;
> + };
> +
> + touchpad@2c {
> + compatible = "hid-over-i2c";
> + reg = <0x2c>;
> +
> + hid-descr-addr = <0x20>;
> + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-0 = <&tpad_default>;
> + pinctrl-names = "default";
> +
> + wakeup-source;
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + clock-frequency = <400000>;
> +
> + status = "okay";
> +
> + typec-mux@8 {
> + compatible = "parade,ps8830";
> + reg = <0x8>;
> +
> + clocks = <&rpmhcc RPMH_RF_CLK3>;
> +
> + vdd-supply = <&vreg_rtmr0_1p15>;
> + vdd33-supply = <&vreg_rtmr0_3p3>;
> + vdd33-cap-supply = <&vreg_rtmr0_3p3>;
> + vddar-supply = <&vreg_rtmr0_1p15>;
> + vddat-supply = <&vreg_rtmr0_1p15>;
> + vddio-supply = <&vreg_rtmr0_1p8>;
> +
> + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-0 = <&rtmr0_default>;
> + pinctrl-names = "default";
> +
> + retimer-switch;
> + orientation-switch;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + retimer_ss0_ss_out: endpoint {
> + remote-endpoint = <&pmic_glink_ss0_ss_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + retimer_ss0_ss_in: endpoint {
> + remote-endpoint = <&usb_1_ss0_qmpphy_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + retimer_ss0_con_sbu_out: endpoint {
> + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c4 {
> + clock-frequency = <400000>;
> +
> + status = "okay";
> +};
> +
> +&i2c5 {
> + clock-frequency = <400000>;
> +
> + status = "okay";
> +
> + /* Type A Port1 */
> + eusb3_typea_repeater: redriver@43 {
> + compatible = "nxp,ptn3222";
> + reg = <0x43>;
> + #phy-cells = <0>;
> +
> + vdd3v3-supply = <&vreg_l13b_3p0>;
> + vdd1v8-supply = <&vreg_l4b_1p8>;
> +
> + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-0 = <&eusb3_reset_n>;
> + pinctrl-names = "default";
> + };
> +
> + /* FRP eUSB */
> + eusb5_frp_repeater: redriver@4f {
> + compatible = "nxp,ptn3222";
> + reg = <0x4f>;
> + #phy-cells = <0>;
> +
> + vdd3v3-supply = <&vreg_l13b_3p0>;
> + vdd1v8-supply = <&vreg_l4b_1p8>;
> +
> + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-0 = <&eusb5_reset_n>;
> + pinctrl-names = "default";
> + };
> +};
> +
> +&i2c7 {
> + clock-frequency = <400000>;
> +
> + status = "okay";
> +
> + typec-mux@8 {
> + compatible = "parade,ps8830";
> + reg = <0x8>;
> +
> + clocks = <&rpmhcc RPMH_RF_CLK4>;
> +
> + vdd-supply = <&vreg_rtmr1_1p15>;
> + vdd33-supply = <&vreg_rtmr1_3p3>;
> + vdd33-cap-supply = <&vreg_rtmr1_3p3>;
> + vddar-supply = <&vreg_rtmr1_1p15>;
> + vddat-supply = <&vreg_rtmr1_1p15>;
> + vddio-supply = <&vreg_rtmr1_1p8>;
> +
> + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-0 = <&rtmr1_default>;
> + pinctrl-names = "default";
> +
> + retimer-switch;
> + orientation-switch;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + retimer_ss1_ss_out: endpoint {
> + remote-endpoint = <&pmic_glink_ss1_ss_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + retimer_ss1_ss_in: endpoint {
> + remote-endpoint = <&usb_1_ss1_qmpphy_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + retimer_ss1_con_sbu_out: endpoint {
> + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c8 {
> + clock-frequency = <400000>;
> +
> + status = "okay";
> +
> + touchscreen@10 {
> + compatible = "hid-over-i2c";
> + reg = <0x10>;
> +
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-0 = <&ts0_default>;
> + pinctrl-names = "default";
> + };
> +};
> +
> +&i2c20 {
> + /* GPIO_80, GPIO_81 */
> + clock-frequency = <400000>;
> +
> + status = "okay";
> +};
> +
> +&mdss {
> + status = "okay";
> +};
> +
> +&mdss_dp3 {
> + compatible = "qcom,x1e80100-dp";
> + /delete-property/ #sound-dai-cells;
> +
> + status = "okay";
> +
> + aux-bus {
> + panel {
> + compatible = "edp-panel";
> + enable-gpios = <&tlmm 74 GPIO_ACTIVE_HIGH>;
> + power-supply = <&vreg_edp_3p3>;
> +
> + pinctrl-0 = <&edp_bl_en>;
> + pinctrl-names = "default";
> +
> + port {
> + edp_panel_in: endpoint {
> + remote-endpoint = <&mdss_dp3_out>;
> + };
> + };
> + };
> + };
> +
> + ports {
> + port@1 {
> + reg = <1>;
> +
> + mdss_dp3_out: endpoint {
> + data-lanes = <0 1 2 3>;
> + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
> +
> + remote-endpoint = <&edp_panel_in>;
> + };
> + };
> + };
> +};
> +
> +&mdss_dp3_phy {
> + vdda-phy-supply = <&vreg_l3j_0p8>;
> + vdda-pll-supply = <&vreg_l2j_1p2>;
> +
> + status = "okay";
> +};
> +
> +&pcie4 {
> + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
> + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-0 = <&pcie4_default>;
> + pinctrl-names = "default";
> +
> + status = "okay";
> +};
> +
> +&pcie4_phy {
> + vdda-phy-supply = <&vreg_l3i_0p8>;
> + vdda-pll-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> +
> +&pcie4_port0 {
> + wifi@0 {
> + compatible = "pci17cb,1107";
> + reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> + vddaon-supply = <&vreg_pmu_aon_0p59>;
> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> + };
> +};
> +
> +&pcie6a {
> + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
> + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
> +
> + vddpe-3v3-supply = <&vreg_nvme>;
> +
> + pinctrl-0 = <&pcie6a_default>;
> + pinctrl-names = "default";
> +
> + status = "okay";
> +};
> +
> +&pcie6a_phy {
> + vdda-phy-supply = <&vreg_l1d_0p8>;
> + vdda-pll-supply = <&vreg_l2j_1p2>;
> +
> + status = "okay";
> +};
> +
> +&pm8550_gpios {
> + rtmr0_default: rtmr0-reset-n-active-state {
> + pins = "gpio10";
> + function = "normal";
> + power-source = <1>; /* 1.8V */
> + bias-disable;
> + input-disable;
> + output-enable;
> + };
> +
> + usb0_3p3_reg_en: usb0-3p3-reg-en-state {
> + pins = "gpio11";
> + function = "normal";
> + power-source = <1>; /* 1.8V */
> + bias-disable;
> + input-disable;
> + output-enable;
> + };
> +};
> +
> +&pm8550ve_9_gpios {
> + usb0_1p8_reg_en: usb0-1p8-reg-en-state {
> + pins = "gpio8";
> + function = "normal";
> + power-source = <1>; /* 1.8V */
> + bias-disable;
> + input-disable;
> + output-enable;
> + };
> +};
> +
> +&pmc8380_5_gpios {
> + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
> + pins = "gpio8";
> + function = "normal";
> + power-source = <1>; /* 1.8V */
> + bias-disable;
> + input-disable;
> + output-enable;
> + };
> +};
> +
> +&qupv3_0 {
> + status = "okay";
> +};
> +
> +&qupv3_1 {
> + status = "okay";
> +};
> +
> +&qupv3_2 {
> + status = "okay";
> +};
> +
> +&remoteproc_adsp {
> + firmware-name = "qcom/x1e80100/Dell/inspiron-14-plus-7441/qcadsp8380.mbn",
> + "qcom/x1e80100/Dell/inspiron-14-plus-7441/adsp_dtbs.elf";
> +
> + status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> + firmware-name = "qcom/x1e80100/Dell/inspiron-14-plus-7441/qccdsp8380.mbn",
> + "qcom/x1e80100/Dell/inspiron-14-plus-7441/cdsp_dtbs.elf";
> +
> + status = "okay";
> +};
> +
> +&smb2360_0 {
> + status = "okay";
> +};
> +
> +&smb2360_0_eusb2_repeater {
> + vdd18-supply = <&vreg_l3d_1p8>;
> + vdd3-supply = <&vreg_l2b_3p0>;
> +};
> +
> +&smb2360_1 {
> + status = "okay";
> +};
> +
> +&smb2360_1_eusb2_repeater {
> + vdd18-supply = <&vreg_l3d_1p8>;
> + vdd3-supply = <&vreg_l14b_3p0>;
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <44 4>, /* SPI11 (TPM) */
> + <76 4>, /* SPI19 (TZ Protected) */
> + <238 1>; /* UFS Reset */
> +
> + cam_rgb_default: cam-rgb-default-state {
> + mclk-pins {
> + /* cam_aon_mclk4 */
> + pins = "gpio100";
> + function = "cam_aon";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + reset-n-pins {
> + pins = "gpio237";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + cam_indicator_en: cam-indicator-en-state {
> + pins = "gpio110";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + cam_ldo_en: cam-ldo-en-state {
> + pins = "gpio91";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + edp_bl_en: edp-bl-en-state {
> + pins = "gpio74";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + edp_reg_en: edp-reg-en-state {
> + pins = "gpio70";
> + function = "gpio";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + eusb3_reset_n: eusb3-reset-n-state {
> + pins = "gpio6";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + output-low;
> + };
> +
> + eusb5_reset_n: eusb5-reset-n-state {
> + pins = "gpio184";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + output-low;
> + };
> +
> + hall_int_n_default: hall-int-n-state {
> + pins = "gpio92";
> + function = "gpio";
> +
> + bias-disable;
> + };
> +
> + kybd_default: kybd-default-state {
> + pins = "gpio67";
> + function = "gpio";
> + bias-pull-up;
> + };
> +
> + nvme_reg_en: nvme-reg-en-state {
> + pins = "gpio18";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + pcie4_default: pcie4-default-state {
> + clkreq-n-pins {
> + pins = "gpio147";
> + function = "pcie4_clk";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + perst-n-pins {
> + pins = "gpio146";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + wake-n-pins {
> + pins = "gpio148";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + pcie6a_default: pcie6a-default-state {
> + clkreq-n-pins {
> + pins = "gpio153";
> + function = "pcie6a_clk";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + perst-n-pins {
> + pins = "gpio152";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + wake-n-pins {
> + pins = "gpio154";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + rtmr1_default: rtmr1-reset-n-active-state {
> + pins = "gpio176";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + tpad_default: tpad-default-state {
> + disable-pins {
> + pins = "gpio38";
> + function = "gpio";
> + output-high;
> + };
> +
> + int-n-pins {
> + pins = "gpio3";
> + function = "gpio";
> + bias-pull-up;
> + };
> +
> + reset-n-pins {
> + pins = "gpio52";
> + function = "gpio";
> + bias-disable;
> + };
> + };
> +
> + ts0_default: ts0-default-state {
> + disable-pins {
> + pins = "gpio75";
> + function = "gpio";
> + output-high;
> + };
> +
> + int-n-pins {
> + pins = "gpio51";
> + function = "gpio";
> + bias-pull-up;
> + };
> +
> + reset-n-pins {
> + pins = "gpio48";
> + function = "gpio";
> + output-low;
> + drive-strength = <2>;
> + };
> + };
> +
> + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
> + pins = "gpio188";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
> + pins = "gpio175";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
> + pins = "gpio186";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + wcn_sw_en: wcn-sw-en-state {
> + pins = "gpio214";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + wcn_wlan_bt_en: wcn-wlan-bt-en-state {
> + pins = "gpio116", "gpio117";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
> +
> +&uart14 {
> + status = "okay";
> +
> + bluetooth {
> + compatible = "qcom,wcn7850-bt";
> + max-speed = <3200000>;
> +
> + vddaon-supply = <&vreg_pmu_aon_0p59>;
> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
> + };
> +};
> +
> +&usb_1_ss0_hsphy {
> + vdd-supply = <&vreg_l3j_0p8>;
> + vdda12-supply = <&vreg_l2j_1p2>;
> +
> + phys = <&smb2360_0_eusb2_repeater>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss0_qmpphy {
> + vdda-phy-supply = <&vreg_l2j_1p2>;
> + vdda-pll-supply = <&vreg_l1j_0p8>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss0 {
> + status = "okay";
> +};
> +
> +&usb_1_ss0_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&usb_1_ss0_dwc3_hs {
> + remote-endpoint = <&pmic_glink_ss0_hs_in>;
> +};
> +
> +&usb_1_ss0_qmpphy_out {
> + remote-endpoint = <&retimer_ss0_ss_in>;
> +};
> +
> +&usb_1_ss1_hsphy {
> + vdd-supply = <&vreg_l3j_0p8>;
> + vdda12-supply = <&vreg_l2j_1p2>;
> +
> + phys = <&smb2360_1_eusb2_repeater>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss1_qmpphy {
> + vdda-phy-supply = <&vreg_l2j_1p2>;
> + vdda-pll-supply = <&vreg_l2d_0p9>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_ss1 {
> + status = "okay";
> +};
> +
> +&usb_1_ss1_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&usb_1_ss1_dwc3_hs {
> + remote-endpoint = <&pmic_glink_ss1_hs_in>;
> +};
> +
> +&usb_1_ss1_qmpphy_out {
> + remote-endpoint = <&retimer_ss1_ss_in>;
> +};
> +
> +&usb_2 {
> + status = "okay";
> +};
> +
> +&usb_2_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&usb_2_hsphy {
> + vdd-supply = <&vreg_l2e_0p8>;
> + vdda12-supply = <&vreg_l3e_1p2>;
> +
> + phys = <&eusb5_frp_repeater>;
> +
> + status = "okay";
> +};
> +
> +&usb_mp {
> + status = "okay";
> +};
> +
> +&usb_mp_dwc3 {
> + phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>;
> + phy-names = "usb2-0", "usb3-0";
> +};
> +
> +&usb_mp_hsphy0 {
> + vdd-supply = <&vreg_l2e_0p8>;
> + vdda12-supply = <&vreg_l3e_1p2>;
> +
> + phys = <&eusb3_typea_repeater>;
> +
> + status = "okay";
> +};
> +
> +&usb_mp_qmpphy0 {
> + vdda-phy-supply = <&vreg_l3e_1p2>;
> + vdda-pll-supply = <&vreg_l3c_0p8>;
> +
> + status = "okay";
> +};
>
Powered by blists - more mailing lists