linux-kernel - Re: [PATCH v2 1/2] remoteproc: imx_dsp_rproc: Add support of recovery process

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <71b45ffd-b554-4369-b988-860bdcfe4ee3@nxp.com>
Date: Fri, 11 Jul 2025 10:54:41 +0300
From: Iuliana Prodan <iuliana.prodan@....com>
To: Mathieu Poirier <mathieu.poirier@...aro.org>,
 Shengjiu Wang <shengjiu.wang@....com>, daniel.baluta@....com
Cc: andersson@...nel.org, shawnguo@...nel.org, s.hauer@...gutronix.de,
 kernel@...gutronix.de, festevam@...il.com, linux-remoteproc@...r.kernel.org,
 imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/2] remoteproc: imx_dsp_rproc: Add support of recovery
 process

Hello Mathieu, Shengjiu,

On 7/10/2025 5:48 PM, Mathieu Poirier wrote:
> On Fri, Jul 04, 2025 at 01:25:28PM +0800, Shengjiu Wang wrote:
>> When recovery is triggered, rproc_stop() is called first then
>> rproc_start(), but there is no rproc_unprepare_device() and
>> rproc_prepare_device() in the flow. As the software reset is needed
>> before DSP starts, so move software reset from imx_dsp_runtime_resume()
>> to .load() to make the recovery work. And make sure memory is cleared
>> before loading firmware.
>>
>> Signed-off-by: Shengjiu Wang <shengjiu.wang@....com>
>> ---
>>   drivers/remoteproc/imx_dsp_rproc.c | 43 +++++++++++++++++++-----------
>>   1 file changed, 27 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
>> index 5ee622bf5352..ba764fc55686 100644
>> --- a/drivers/remoteproc/imx_dsp_rproc.c
>> +++ b/drivers/remoteproc/imx_dsp_rproc.c
>> @@ -774,7 +774,6 @@ static int imx_dsp_rproc_prepare(struct rproc *rproc)
>>   {
>>   	struct imx_dsp_rproc *priv = rproc->priv;
>>   	struct device *dev = rproc->dev.parent;
>> -	struct rproc_mem_entry *carveout;
>>   	int ret;
>>   
>>   	ret = imx_dsp_rproc_add_carveout(priv);
>> @@ -785,15 +784,6 @@ static int imx_dsp_rproc_prepare(struct rproc *rproc)
>>   
>>   	pm_runtime_get_sync(dev);
>>   
>> -	/*
>> -	 * Clear buffers after pm rumtime for internal ocram is not
>> -	 * accessible if power and clock are not enabled.
>> -	 */
>> -	list_for_each_entry(carveout, &rproc->carveouts, node) {
>> -		if (carveout->va)
>> -			memset(carveout->va, 0, carveout->len);
>> -	}
>> -
>>   	return  0;
>>   }
>>   
>> @@ -1022,13 +1012,39 @@ static int imx_dsp_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw
>>   	return 0;
>>   }
>>   
>> +static int imx_dsp_rproc_load(struct rproc *rproc, const struct firmware *fw)
>> +{
>> +	struct imx_dsp_rproc *priv = rproc->priv;
>> +	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
>> +	struct rproc_mem_entry *carveout;
>> +	int ret;
>> +
>> +	/* Reset DSP if needed */
>> +	if (dsp_dcfg->reset)
>> +		dsp_dcfg->reset(priv);
>> +	/*
>> +	 * Clear buffers after pm rumtime for internal ocram is not
>> +	 * accessible if power and clock are not enabled.
>> +	 */
>> +	list_for_each_entry(carveout, &rproc->carveouts, node) {
>> +		if (carveout->va)
>> +			memset(carveout->va, 0, carveout->len);
>> +	}
>> +
>> +	ret = imx_dsp_rproc_elf_load_segments(rproc, fw);
>> +	if (ret)
>> +		return ret;
>> +
>> +	return 0;
>> +}
>> +
> 
> This is a much better approach.  During my last review I said that I would not
> move forward with this work until Daniel or Iuliana provide their R-B and yet,
> they have not been added to the recipient list.
> 

I will have a look at this patchset at the beginning of next week.
I also plan to test it.

Iulia

>>   static const struct rproc_ops imx_dsp_rproc_ops = {
>>   	.prepare	= imx_dsp_rproc_prepare,
>>   	.unprepare	= imx_dsp_rproc_unprepare,
>>   	.start		= imx_dsp_rproc_start,
>>   	.stop		= imx_dsp_rproc_stop,
>>   	.kick		= imx_dsp_rproc_kick,
>> -	.load		= imx_dsp_rproc_elf_load_segments,
>> +	.load		= imx_dsp_rproc_load,
>>   	.parse_fw	= imx_dsp_rproc_parse_fw,
>>   	.handle_rsc	= imx_dsp_rproc_handle_rsc,
>>   	.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
>> @@ -1214,7 +1230,6 @@ static int imx_dsp_runtime_resume(struct device *dev)
>>   {
>>   	struct rproc *rproc = dev_get_drvdata(dev);
>>   	struct imx_dsp_rproc *priv = rproc->priv;
>> -	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
>>   	int ret;
>>   
>>   	/*
>> @@ -1235,10 +1250,6 @@ static int imx_dsp_runtime_resume(struct device *dev)
>>   		return ret;
>>   	}
>>   
>> -	/* Reset DSP if needed */
>> -	if (dsp_dcfg->reset)
>> -		dsp_dcfg->reset(priv);
>> -
>>   	return 0;
>>   }
>>   
>> -- 
>> 2.34.1
>>