| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250712173805.584586-7-jonas@kwiboo.se>
Date: Sat, 12 Jul 2025 17:37:48 +0000
From: Jonas Karlman <jonas@...boo.se>
To: Heiko Stuebner <heiko@...ech.de>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Yao Zi <ziyao@...root.org>,
Chukun Pan <amadeus@....edu.cn>,
linux-rockchip@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Jonas Karlman <jonas@...boo.se>
Subject: [PATCH v3 6/6] arm64: dts: rockchip: Add FriendlyElec NanoPi Zero2
The NanoPi Zero2 is a small single board computer developed by
FriendlyElec, based on the Rockchip RK3528A SoC.
Add initial device tree for the FriendlyElec NanoPi Zero2 board.
Signed-off-by: Jonas Karlman <jonas@...boo.se>
Tested-by: Yao Zi <ziyao@...root.org>
---
Changes in v3:
- Rename led nodes to led-0/led-1 (Chukun Pan)
Changes in v2:
- Drop clock-output-names prop from rtc node (Chukun Pan)
- Collect t-b tag
Schematics: https://wiki.friendlyelec.com/wiki/images/3/37/NanoPi_Zero2_2407_SCH.pdf
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3528-nanopi-zero2.dts | 340 ++++++++++++++++++
2 files changed, 341 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 206fb8572cf7..0662fcf00628 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-armsom-sige1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-nanopi-zero2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2f.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
new file mode 100644
index 000000000000..9f683033c5f3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi Zero2";
+ compatible = "friendlyarm,nanopi-zero2", "rockchip,rk3528";
+
+ aliases {
+ ethernet0 = &gmac1;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ adc-keys-0 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-maskrom {
+ label = "MASK";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ adc-keys-1 {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-recovery {
+ label = "RECOVERY";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led1>, <&led_sys>;
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ vcc0v6_ddr: regulator-0v6-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc0v6_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_0v9: regulator-0v9-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_ddr: regulator-1v1-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v8: regulator-1v8-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_3v3: regulator-3v3-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sd: regulator-3v3-vcc-sd {
+ compatible = "regulator-fixed";
+ gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwren_l>;
+ regulator-name = "vcc3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ usb2_host_5v: regulator-5v0-usb2-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host1_pwren>;
+ regulator-name = "usb2_host_5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vccio_sd: regulator-vccio-sd {
+ compatible = "regulator-gpio";
+ gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ states = <1800000 0x0>, <3300000 0x1>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_arm: regulator-vdd-arm {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <746000>;
+ regulator-max-microvolt = <1201000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ vdd_logic: regulator-vdd-logic {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <705000>;
+ regulator-max-microvolt = <1006000>;
+ regulator-settling-time-up-us = <250>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+ <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m0_xfer>;
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int_l>;
+ wakeup-source;
+ };
+};
+
+&mdio1 {
+ rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rstn_l>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ ethernet {
+ gmac1_rstn_l: gmac1-rstn-l {
+ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led1: led1 {
+ rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ led_sys: led-sys {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtc {
+ rtc_int_l: rtc-int-l {
+ rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sdmmc_pwren_l: sdmmc-pwren-l {
+ rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ usb20_host1_pwren: usb20-host1-pwren {
+ rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1m0_pins>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m0_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0m0_xfer>;
+ status = "okay";
+};
--
2.49.0
Powered by blists - more mailing lists