[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250715043405.6281-1-Qing-wu.Li@leica-geosystems.com.cn>
Date: Tue, 15 Jul 2025 12:34:03 +0800
From: LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
To: lee@...nel.org,
pavel@...nel.org,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
linux-leds@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Qing-wu.Li@...ca-geosystems.com.cn
Cc: bsp-development.geo@...ca-geosystems.com
Subject: [PATCH V7 0/2] leds: pwm: Add optional GPIO enable pin support
Add support for an optional GPIO enable pin to the PWM LED driver.
Some LED controllers require an additional enable GPIO to be enabled
on the device before PWM control can take effect.
Testing:
- Tested on i.MX8MP EVK board with TPS92380 LED backlight driver
- Verified GPIO enable/disable functionality works correctly
- Confirmed both GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW polarities
work properly
Device tree configuration used for testing:
backlight_keypad: backlight-keypad {
compatible = "pwm-leds";
led {
color = <LED_COLOR_ID_WHITE>;
enable-gpios = <&pca6416 11 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_KBD_BACKLIGHT;
max-brightness = <100>;
pwms = <&pwm3 0 2500 0>;
};
};
Changes in V7:
- Format comment to match kernel style according to inputs from Lee Jones.
LI Qingwu (2):
dt-bindings: leds: pwm: Add enable-gpios property
leds: pwm: Add optional GPIO enable pin support
.../devicetree/bindings/leds/leds-pwm.yaml | 7 ++++++
drivers/leds/leds-pwm.c | 23 +++++++++++++++++++
2 files changed, 30 insertions(+)
--
2.43.0
Powered by blists - more mailing lists