| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250716152017.4070029-4-pankaj.patil@oss.qualcomm.com>
Date: Wed, 16 Jul 2025 20:50:13 +0530
From: Pankaj Patil <pankaj.patil@....qualcomm.com>
To: sboyd@...nel.org, mturquette@...libre.com, andersson@...nel.org,
robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
quic_rjendra@...cinc.com, taniya.das@....qualcomm.com
Cc: linux-clk@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 3/7] clk: qcom: Add TCSR clock driver for Glymur
From: Taniya Das <taniya.das@....qualcomm.com>
Add a clock driver for the TCSR clock controller found on Glymur, which
provides refclks for PCIE, USB, and UFS.
Signed-off-by: Taniya Das <taniya.das@....qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@....qualcomm.com>
---
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/tcsrcc-glymur.c | 263 +++++++++++++++++++++++++++++++
3 files changed, 272 insertions(+)
create mode 100644 drivers/clk/qcom/tcsrcc-glymur.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 36d6e6e1e7f0..051301007aa6 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -1304,6 +1304,14 @@ config SM_LPASSCC_6115
Say Y if you want to toggle LPASS-adjacent resets within
this clock controller to reset the LPASS subsystem.
+config SC_TCSRCC_GLYMUR
+ tristate "GLYMUR TCSR Clock Controller"
+ depends on ARM64 || COMPILE_TEST
+ select QCOM_GDSC
+ help
+ Support for the TCSR clock controller on GLYMUR devices.
+ Say Y if you want to use peripheral devices such as USB/PCIe/EDP.
+
config SM_TCSRCC_8550
tristate "SM8550 TCSR Clock Controller"
depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index ab59434338bb..bf95729678f6 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -162,6 +162,7 @@ obj-$(CONFIG_SM_GPUCC_8450) += gpucc-sm8450.o
obj-$(CONFIG_SM_GPUCC_8550) += gpucc-sm8550.o
obj-$(CONFIG_SM_GPUCC_8650) += gpucc-sm8650.o
obj-$(CONFIG_SM_LPASSCC_6115) += lpasscc-sm6115.o
+obj-$(CONFIG_SC_TCSRCC_GLYMUR) += tcsrcc-glymur.o
obj-$(CONFIG_SM_TCSRCC_8550) += tcsrcc-sm8550.o
obj-$(CONFIG_SM_TCSRCC_8650) += tcsrcc-sm8650.o
obj-$(CONFIG_SM_TCSRCC_8750) += tcsrcc-sm8750.o
diff --git a/drivers/clk/qcom/tcsrcc-glymur.c b/drivers/clk/qcom/tcsrcc-glymur.c
new file mode 100644
index 000000000000..760d36339b10
--- /dev/null
+++ b/drivers/clk/qcom/tcsrcc-glymur.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,glymur-tcsrcc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+static struct clk_branch tcsr_edp_clkref_en = {
+ .halt_reg = 0x1c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_edp_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_1_clkref_en = {
+ .halt_reg = 0x4,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x4,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_pcie_1_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_2_clkref_en = {
+ .halt_reg = 0x8,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x8,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_pcie_2_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_3_clkref_en = {
+ .halt_reg = 0x10,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x10,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_pcie_3_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_pcie_4_clkref_en = {
+ .halt_reg = 0x14,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x14,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_pcie_4_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb2_1_clkref_en = {
+ .halt_reg = 0x28,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x28,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_usb2_1_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb2_2_clkref_en = {
+ .halt_reg = 0x2c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x2c,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_usb2_2_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb2_3_clkref_en = {
+ .halt_reg = 0x30,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x30,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_usb2_3_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb2_4_clkref_en = {
+ .halt_reg = 0x44,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x44,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_usb2_4_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb3_0_clkref_en = {
+ .halt_reg = 0x20,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x20,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_usb3_0_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb3_1_clkref_en = {
+ .halt_reg = 0x24,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x24,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_usb3_1_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb4_1_clkref_en = {
+ .halt_reg = 0x0,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_usb4_1_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch tcsr_usb4_2_clkref_en = {
+ .halt_reg = 0x18,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x18,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "tcsr_usb4_2_clkref_en",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_regmap *tcsr_cc_glymur_clocks[] = {
+ [TCSR_EDP_CLKREF_EN] = &tcsr_edp_clkref_en.clkr,
+ [TCSR_PCIE_1_CLKREF_EN] = &tcsr_pcie_1_clkref_en.clkr,
+ [TCSR_PCIE_2_CLKREF_EN] = &tcsr_pcie_2_clkref_en.clkr,
+ [TCSR_PCIE_3_CLKREF_EN] = &tcsr_pcie_3_clkref_en.clkr,
+ [TCSR_PCIE_4_CLKREF_EN] = &tcsr_pcie_4_clkref_en.clkr,
+ [TCSR_USB2_1_CLKREF_EN] = &tcsr_usb2_1_clkref_en.clkr,
+ [TCSR_USB2_2_CLKREF_EN] = &tcsr_usb2_2_clkref_en.clkr,
+ [TCSR_USB2_3_CLKREF_EN] = &tcsr_usb2_3_clkref_en.clkr,
+ [TCSR_USB2_4_CLKREF_EN] = &tcsr_usb2_4_clkref_en.clkr,
+ [TCSR_USB3_0_CLKREF_EN] = &tcsr_usb3_0_clkref_en.clkr,
+ [TCSR_USB3_1_CLKREF_EN] = &tcsr_usb3_1_clkref_en.clkr,
+ [TCSR_USB4_1_CLKREF_EN] = &tcsr_usb4_1_clkref_en.clkr,
+ [TCSR_USB4_2_CLKREF_EN] = &tcsr_usb4_2_clkref_en.clkr,
+};
+
+static const struct regmap_config tcsr_cc_glymur_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x44,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc tcsr_cc_glymur_desc = {
+ .config = &tcsr_cc_glymur_regmap_config,
+ .clks = tcsr_cc_glymur_clocks,
+ .num_clks = ARRAY_SIZE(tcsr_cc_glymur_clocks),
+};
+
+static const struct of_device_id tcsr_cc_glymur_match_table[] = {
+ { .compatible = "qcom,glymur-tcsr" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tcsr_cc_glymur_match_table);
+
+static int tcsr_cc_glymur_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+
+ regmap = qcom_cc_map(pdev, &tcsr_cc_glymur_desc);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return qcom_cc_really_probe(&pdev->dev, &tcsr_cc_glymur_desc, regmap);
+}
+
+static struct platform_driver tcsr_cc_glymur_driver = {
+ .probe = tcsr_cc_glymur_probe,
+ .driver = {
+ .name = "tcsrcc-glymur",
+ .of_match_table = tcsr_cc_glymur_match_table,
+ },
+};
+
+static int __init tcsr_cc_glymur_init(void)
+{
+ return platform_driver_register(&tcsr_cc_glymur_driver);
+}
+subsys_initcall(tcsr_cc_glymur_init);
+
+static void __exit tcsr_cc_glymur_exit(void)
+{
+ platform_driver_unregister(&tcsr_cc_glymur_driver);
+}
+module_exit(tcsr_cc_glymur_exit);
+
+MODULE_DESCRIPTION("QTI TCSRCC GLYMUR Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
Powered by blists - more mailing lists