| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250717135336.3974758-3-tmaimon77@gmail.com>
Date: Thu, 17 Jul 2025 16:53:36 +0300
From: Tomer Maimon <tmaimon77@...il.com>
To: <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <avifishman70@...il.com>, <tali.perry1@...il.com>,
<joel@....id.au>, <venture@...gle.com>, <yuenn@...gle.com>,
<benjaminfair@...gle.com>
CC: <openbmc@...ts.ozlabs.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Tomer Maimon <tmaimon77@...il.com>
Subject: [PATCH v1 2/2] arm64: dts: nuvoton: npcm845-evb: Add peripheral nodes
Enable peripheral support for the Nuvoton NPCM845 Evaluation Board by
adding device nodes for Ethernet controllers, MMC controller, SPI
controllers, USB device controllers, random number generator, ADC,
PWM-FAN controller, I2C controllers, and PECI interface.
Include MDIO nodes for Ethernet PHYs, reserved memory for TIP, and
aliases for device access.
This patch enhances functionality for NPCM845-EVB platform.
Signed-off-by: Tomer Maimon <tmaimon77@...il.com>
---
.../boot/dts/nuvoton/nuvoton-npcm845-evb.dts | 445 ++++++++++++++++++
1 file changed, 445 insertions(+)
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
index 2638ee1c3846..46d5bd1c2129 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -10,6 +10,42 @@ / {
aliases {
serial0 = &serial0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ ethernet3 = &gmac3;
+ mdio-gpio0 = &mdio0;
+ mdio-gpio1 = &mdio1;
+ fiu0 = &fiu0;
+ fiu1 = &fiu3;
+ fiu2 = &fiux;
+ fiu3 = &fiu1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ i2c14 = &i2c14;
+ i2c15 = &i2c15;
+ i2c16 = &i2c16;
+ i2c17 = &i2c17;
+ i2c18 = &i2c18;
+ i2c19 = &i2c19;
+ i2c20 = &i2c20;
+ i2c21 = &i2c21;
+ i2c22 = &i2c22;
+ i2c23 = &i2c23;
+ i2c24 = &i2c24;
+ i2c25 = &i2c25;
+ i2c26 = &i2c26;
};
chosen {
@@ -25,12 +61,421 @@ refclk: refclk-25mhz {
clock-frequency = <25000000>;
#clock-cells = <0>;
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tip_reserved: tip@0 {
+ reg = <0x0 0x0 0x0 0x6200000>;
+ };
+ };
+
+ mdio0: mdio@0 {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
+ <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@1 {
+ };
+ };
+
+ mdio1: mdio@1 {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>,
+ <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy@1 {
+ };
+ };
+};
+
+&gmac1 {
+ phy-mode = "rgmii-id";
+ snps,eee-force-disable;
+ status = "okay";
+};
+
+&gmac2 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&r1_pins
+ &r1oen_pins>;
+ phy-handle = <&phy0>;
+ status = "okay";
+};
+
+&gmac3 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&r2_pins
+ &r2oen_pins>;
+ phy-handle = <&phy1>;
+ status = "okay";
};
&serial0 {
status = "okay";
};
+&fiu0 {
+ status = "okay";
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-rx-bus-width = <1>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ partitions@...00000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bbuboot1@0 {
+ label = "bb-uboot-1";
+ reg = <0x0000000 0x80000>;
+ read-only;
+ };
+ bbuboot2@...00 {
+ label = "bb-uboot-2";
+ reg = <0x0080000 0x80000>;
+ read-only;
+ };
+ envparam@...000 {
+ label = "env-param";
+ reg = <0x0100000 0x40000>;
+ read-only;
+ };
+ spare@...000 {
+ label = "spare";
+ reg = <0x0140000 0xC0000>;
+ };
+ kernel@...000 {
+ label = "kernel";
+ reg = <0x0200000 0x400000>;
+ };
+ rootfs@...000 {
+ label = "rootfs";
+ reg = <0x0600000 0x700000>;
+ };
+ spare1@...000 {
+ label = "spare1";
+ reg = <0x0D00000 0x200000>;
+ };
+ spare2@...000 {
+ label = "spare2";
+ reg = <0x0F00000 0x200000>;
+ };
+ spare3@...0000 {
+ label = "spare3";
+ reg = <0x1100000 0x200000>;
+ };
+ spare4@...0000 {
+ label = "spare4";
+ reg = <0x1300000 0x0>;
+ };
+ };
+ };
+};
+
+&fiu1 {
+ status = "okay";
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ partitions@...00000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ system1@0 {
+ label = "spi1-system1";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&fiu3 {
+ pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
+ status = "okay";
+ spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-rx-bus-width = <1>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ partitions@...00000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ system1@0 {
+ label = "spi3-system1";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&fiux {
+ spix-mode;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&udc0 {
+ status = "okay";
+};
+
+&udc1 {
+ status = "okay";
+};
+
+&udc2 {
+ status = "okay";
+};
+
+&udc3 {
+ status = "okay";
+};
+
+&udc4 {
+ status = "okay";
+};
+
+&udc5 {
+ status = "okay";
+};
+
+&udc6 {
+ status = "okay";
+};
+
+&udc7 {
+ status = "okay";
+};
+
+&mc {
+ status = "okay";
+};
+
+&peci {
+ status = "okay";
+};
+
+&rng {
+ status = "okay";
+};
+
+&adc {
+ #io-channel-cells = <1>;
+ status = "okay";
+};
+
&watchdog1 {
status = "okay";
};
+
+&pwm_fan {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins &pwm1_pins
+ &pwm2_pins &pwm3_pins
+ &pwm4_pins &pwm5_pins
+ &pwm6_pins &pwm7_pins
+ &fanin0_pins &fanin1_pins
+ &fanin2_pins &fanin3_pins
+ &fanin4_pins &fanin5_pins
+ &fanin6_pins &fanin7_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fan@0 {
+ reg = <0x00>;
+ fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ cooling-levels = <127 255>;
+ };
+ fan@1 {
+ reg = <0x01>;
+ fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@2 {
+ reg = <0x02>;
+ fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@3 {
+ reg = <0x03>;
+ fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@4 {
+ reg = <0x04>;
+ fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@5 {
+ reg = <0x05>;
+ fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@6 {
+ reg = <0x06>;
+ fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan@7 {
+ reg = <0x07>;
+ fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+};
+
+&pspi {
+ cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ Flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <1000000>;
+ partition@0 {
+ label = "spi1_spare0";
+ reg = <0x0 0x0>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ tmp100@48 {
+ compatible = "tmp100";
+ reg = <0x48>;
+ status = "okay";
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&i2c16 {
+ status = "okay";
+};
+
+&i2c17 {
+ status = "okay";
+};
+
+&i2c18 {
+ status = "okay";
+};
+
+&i2c19 {
+ status = "okay";
+};
+
+&i2c20 {
+ status = "okay";
+};
+
+&i2c21 {
+ status = "okay";
+};
+
+&i2c22 {
+ status = "okay";
+};
+
+&i2c23 {
+ status = "okay";
+};
+
+&i2c24 {
+ status = "okay";
+};
+
+&i2c25 {
+ status = "okay";
+};
+
+&i2c26 {
+ status = "okay";
+};
--
2.34.1
Powered by blists - more mailing lists