[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <fd107ad0-27b4-48f0-a441-03294e7b029e@linaro.org>
Date: Fri, 18 Jul 2025 16:53:17 +0100
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: Val Packett <val@...kett.cool>
Cc: Aleksandrs Vinarskis <alex.vinarskis@...il.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 0/4] Add Dell Inspiron 7441 / Latitude 7455
(X1E-80-100)
On 18/07/2025 16:34, Bryan O'Donoghue wrote:
> On 18/07/2025 16:33, Bryan O'Donoghue wrote:
>> On 16/07/2025 11:53, Bryan O'Donoghue wrote:
>>> On 16/07/2025 01:26, Val Packett wrote:
>>>> Since v3[1]:
>>>>
>>>> - Applied R-b tags
>>>> - Skipping the eDP panel ID patch now since it's been applied
>>>> - Fixed the last remaining '-names before -0' order issue
>>>> - Changed usb_mp: keep the unused PHYs enabled in the DT
>>>> (to let them go to sleep), like how it is done for the XPS
>>>>
>>>> [1]: https://lore.kernel.org/all/20250706205723.9790-2-
>>>> val@...kett.cool/
>>>>
>>>> Bryan O'Donoghue (2):
>>>> dt-bindings: arm: qcom: Add Dell Inspiron 14 Plus 7441
>>>> arm64: dts: qcom: Add support for Dell Inspiron 7441 / Latitude 7455
>>>>
>>>> Val Packett (2):
>>>> dt-bindings: arm: qcom: Add Dell Latitude 7455
>>>> firmware: qcom: scm: Allow QSEECOM on Dell Inspiron 7441 / Latitude
>>>> 7455
>>>>
>>>> .../devicetree/bindings/arm/qcom.yaml | 2 +
>>>> arch/arm64/boot/dts/qcom/Makefile | 4 +
>>>> arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi | 1666 +++++++++++++
>>>> ++++
>>>> .../x1e80100-dell-inspiron-14-plus-7441.dts | 52 +
>>>> .../dts/qcom/x1e80100-dell-latitude-7455.dts | 53 +
>>>> drivers/firmware/qcom/qcom_scm.c | 2 +
>>>> 6 files changed, 1779 insertions(+)
>>>> create mode 100644 arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
>>>> create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-
>>>> inspiron-14-plus-7441.dts
>>>> create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-dell-
>>>> latitude-7455.dts
>>>>
>>>
>>> Just tested on the 14p this updated version seems to work just about
>>> fine - or no worse than previous.
>>>
>>> Tested-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
>>
>> Ah I was booting my old dts with the spelling mistake "inspir I on"
>> booting the insprion.dtb here is a no-boot for me.
>>
>> Please hold off on applying this, until its root-caused.
>>
>> ---
>> bod
>
> [sic] inspiron.dtb
Ah no it is OK to boot.
For some reason my encrypted disk prompt is a blank screen with this dts
but other than that it appears to work the same.
No reason to hold it up.
---
bod
Powered by blists - more mailing lists