Message-ID: <aa667a0c-d1ed-48d7-9e05-1cbed77643b9@amd.com>
Date: Mon, 21 Jul 2025 14:23:00 -0700
From: Brett Creeley <bcreeley@....com>
To: Dong Yibo <dong100@...se.com>, andrew+netdev@...n.ch,
 davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
 pabeni@...hat.com, horms@...nel.org, corbet@....net, gur.stavi@...wei.com,
 maddy@...ux.ibm.com, mpe@...erman.id.au, danishanwar@...com, lee@...ger.us,
 gongfan1@...wei.com, lorenzo@...nel.org, geert+renesas@...der.be,
 Parthiban.Veerasooran@...rochip.com, lukas.bulwahn@...hat.com,
 alexanderduyck@...com, richardcochran@...il.com
Cc: netdev@...r.kernel.org, linux-doc@...r.kernel.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 01/15] net: rnpgbe: Add build support for rnpgbe



On 7/21/2025 4:32 AM, Dong Yibo wrote:
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
> 
> 
> Add build options and doc for mucse.
> Initialize pci device access for MUCSE devices.
> 
> Signed-off-by: Dong Yibo <dong100@...se.com>
> ---
>   .../device_drivers/ethernet/index.rst         |   1 +
>   .../device_drivers/ethernet/mucse/rnpgbe.rst  |  21 ++
>   MAINTAINERS                                   |   8 +
>   drivers/net/ethernet/Kconfig                  |   1 +
>   drivers/net/ethernet/Makefile                 |   1 +
>   drivers/net/ethernet/mucse/Kconfig            |  34 +++
>   drivers/net/ethernet/mucse/Makefile           |   7 +
>   drivers/net/ethernet/mucse/rnpgbe/Makefile    |   9 +
>   drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h    |  33 +++
>   .../net/ethernet/mucse/rnpgbe/rnpgbe_main.c   | 226 ++++++++++++++++++
>   10 files changed, 341 insertions(+)
>   create mode 100644 Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst
>   create mode 100644 drivers/net/ethernet/mucse/Kconfig
>   create mode 100644 drivers/net/ethernet/mucse/Makefile
>   create mode 100644 drivers/net/ethernet/mucse/rnpgbe/Makefile
>   create mode 100644 drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h
>   create mode 100644 drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
> 
> diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst
> index 40ac552641a3..0e03c5c10d30 100644
> --- a/Documentation/networking/device_drivers/ethernet/index.rst
> +++ b/Documentation/networking/device_drivers/ethernet/index.rst
> @@ -61,6 +61,7 @@ Contents:
>      wangxun/txgbevf
>      wangxun/ngbe
>      wangxun/ngbevf
> +   mucse/rnpgbe
> 
>   .. only::  subproject and html
> 
> diff --git a/Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst b/Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst
> new file mode 100644
> index 000000000000..7562fb6b8f61
> --- /dev/null
> +++ b/Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst
> @@ -0,0 +1,21 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +===========================================================
> +Linux Base Driver for MUCSE(R) Gigabit PCI Express Adapters
> +===========================================================
> +
> +MUCSE Gigabit Linux driver.
> +Copyright (c) 2020 - 2025 MUCSE Co.,Ltd.
> +
> +Identifying Your Adapter
> +========================
> +The driver is compatible with devices based on the following:
> +
> + * MUCSE(R) Ethernet Controller N500 series
> + * MUCSE(R) Ethernet Controller N210 series
> +
> +Support
> +=======
> + If you have problems with the software or hardware, please contact our
> + customer support team via email at techsupport@...se.com or check our
> + website at https://www.mucse.com/en/
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1bc1698bc5ae..da0d12e77ddc 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17033,6 +17033,14 @@ T:     git git://linuxtv.org/media.git
>   F:     Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
>   F:     drivers/media/i2c/mt9v111.c
> 
> +MUCSE ETHERNET DRIVER
> +M:     Yibo Dong <dong100@...se.com>
> +L:     netdev@...r.kernel.org
> +S:     Maintained
> +W:     https://www.mucse.com/en/
> +F:     Documentation/networking/device_drivers/ethernet/mucse/*
> +F:     drivers/net/ethernet/mucse/*
> +
>   MULTIFUNCTION DEVICES (MFD)
>   M:     Lee Jones <lee@...nel.org>
>   S:     Maintained
> diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
> index f86d4557d8d7..77c55fa11942 100644
> --- a/drivers/net/ethernet/Kconfig
> +++ b/drivers/net/ethernet/Kconfig
> @@ -202,5 +202,6 @@ source "drivers/net/ethernet/wangxun/Kconfig"
>   source "drivers/net/ethernet/wiznet/Kconfig"
>   source "drivers/net/ethernet/xilinx/Kconfig"
>   source "drivers/net/ethernet/xircom/Kconfig"
> +source "drivers/net/ethernet/mucse/Kconfig"
> 
>   endif # ETHERNET
> diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
> index 67182339469a..696825bd1211 100644
> --- a/drivers/net/ethernet/Makefile
> +++ b/drivers/net/ethernet/Makefile
> @@ -107,3 +107,4 @@ obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
>   obj-$(CONFIG_NET_VENDOR_SYNOPSYS) += synopsys/
>   obj-$(CONFIG_NET_VENDOR_PENSANDO) += pensando/
>   obj-$(CONFIG_OA_TC6) += oa_tc6.o
> +obj-$(CONFIG_NET_VENDOR_MUCSE) += mucse/
> diff --git a/drivers/net/ethernet/mucse/Kconfig b/drivers/net/ethernet/mucse/Kconfig
> new file mode 100644
> index 000000000000..be0fdf268484
> --- /dev/null
> +++ b/drivers/net/ethernet/mucse/Kconfig
> @@ -0,0 +1,34 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Mucse network device configuration
> +#
> +
> +config NET_VENDOR_MUCSE
> +       bool "Mucse devices"
> +       default y
> +       help
> +         If you have a network (Ethernet) card from Mucse(R), say Y.
> +
> +         Note that the answer to this question doesn't directly affect the
> +         kernel: saying N will just cause the configurator to skip all
> +         the questions about Mucse(R) cards. If you say Y, you will
> +         be asked for your specific card in the following questions.
> +
> +if NET_VENDOR_MUCSE
> +
> +config MGBE
> +       tristate "Mucse(R) 1GbE PCI Express adapters support"
> +       depends on PCI
> +       select PAGE_POOL
> +       help
> +         This driver supports Mucse(R) 1GbE PCI Express family of
> +         adapters.
> +
> +         More specific information on configuring the driver is in
> +         <file:Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst>.
> +
> +         To compile this driver as a module, choose M here. The module
> +         will be called rnpgbe.
> +
> +endif # NET_VENDOR_MUCSE
> +
> diff --git a/drivers/net/ethernet/mucse/Makefile b/drivers/net/ethernet/mucse/Makefile
> new file mode 100644
> index 000000000000..f0bd79882488
> --- /dev/null
> +++ b/drivers/net/ethernet/mucse/Makefile
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Makefile for the Mucse(R) network device drivers.
> +#
> +
> +obj-$(CONFIG_MGBE) += rnpgbe/
> +
> diff --git a/drivers/net/ethernet/mucse/rnpgbe/Makefile b/drivers/net/ethernet/mucse/rnpgbe/Makefile
> new file mode 100644
> index 000000000000..0942e27f5913
> --- /dev/null
> +++ b/drivers/net/ethernet/mucse/rnpgbe/Makefile
> @@ -0,0 +1,9 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright(c) 2020 - 2025 MUCSE Corporation.
> +#
> +# Makefile for the MUCSE(R) 1GbE PCI Express ethernet driver
> +#
> +
> +obj-$(CONFIG_MGBE) += rnpgbe.o
> +
> +rnpgbe-objs := rnpgbe_main.o
> diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h
> new file mode 100644
> index 000000000000..224e395d6be3
> --- /dev/null
> +++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright(c) 2020 - 2025 Mucse Corporation. */
> +
> +#ifndef _RNPGBE_H
> +#define _RNPGBE_H
> +
> +enum rnpgbe_boards {
> +       board_n500,
> +       board_n210,
> +       board_n210L,
> +};
> +
> +struct mucse {
> +       struct net_device *netdev;
> +       struct pci_dev *pdev;
> +       /* board number */
> +       u16 bd_number;
> +
> +       char name[60];
> +};
> +
> +/* Device IDs */
> +#ifndef PCI_VENDOR_ID_MUCSE
> +#define PCI_VENDOR_ID_MUCSE 0x8848
> +#endif /* PCI_VENDOR_ID_MUCSE */
> +
> +#define PCI_DEVICE_ID_N500_QUAD_PORT 0x8308
> +#define PCI_DEVICE_ID_N500_DUAL_PORT 0x8318
> +#define PCI_DEVICE_ID_N500_VF 0x8309
> +#define PCI_DEVICE_ID_N210 0x8208
> +#define PCI_DEVICE_ID_N210L 0x820a
> +
> +#endif /* _RNPGBE_H */
> diff --git a/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
> new file mode 100644
> index 000000000000..13b49875006b
> --- /dev/null
> +++ b/drivers/net/ethernet/mucse/rnpgbe/rnpgbe_main.c
> @@ -0,0 +1,226 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright(c) 2020 - 2025 Mucse Corporation. */
> +
> +#include <linux/types.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/netdevice.h>
> +#include <linux/string.h>
> +#include <linux/etherdevice.h>
> +
> +#include "rnpgbe.h"
> +
> +char rnpgbe_driver_name[] = "rnpgbe";
> +
> +/* rnpgbe_pci_tbl - PCI Device ID Table
> + *
> + * { PCI_DEVICE(Vendor ID, Device ID),
> + *   driver_data (used for different hw chip) }
> + */
> +static struct pci_device_id rnpgbe_pci_tbl[] = {
> +       { PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N500_QUAD_PORT),
> +         .driver_data = board_n500},
> +       { PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N500_DUAL_PORT),
> +         .driver_data = board_n500},
> +       { PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N210),
> +         .driver_data = board_n210},
> +       { PCI_DEVICE(PCI_VENDOR_ID_MUCSE, PCI_DEVICE_ID_N210L),
> +         .driver_data = board_n210L},
> +       /* required last entry */
> +       {0, },
> +};
> +
> +/**
> + * rnpgbe_add_adapter - add netdev for this pci_dev
> + * @pdev: PCI device information structure
> + *
> + * rnpgbe_add_adapter initializes a netdev for this pci_dev
> + * structure. Initializes Bar map, private structure, and a
> + * hardware reset occur.
> + *
> + * @return: 0 on success, negative on failure
> + **/
> +static int rnpgbe_add_adapter(struct pci_dev *pdev)
> +{
> +       struct mucse *mucse = NULL;

Nit, this does not need to be initialized as it will either be allocated 
in alloc_etherdev* or unused on failure.

> +       struct net_device *netdev;
> +       static int bd_number;
> +
> +       netdev = alloc_etherdev_mq(sizeof(struct mucse), 1);
> +       if (!netdev)
> +               return -ENOMEM;
> +
> +       mucse = netdev_priv(netdev);
> +       mucse->netdev = netdev;
> +       mucse->pdev = pdev;
> +       mucse->bd_number = bd_number++;
> +       snprintf(mucse->name, sizeof(netdev->name), "%s%d",
> +                rnpgbe_driver_name, mucse->bd_number);
> +       pci_set_drvdata(pdev, mucse);
> +
> +       return 0;
> +}
> +
> +/**
> + * rnpgbe_probe - Device Initialization Routine
> + * @pdev: PCI device information struct
> + * @id: entry in rnpgbe_pci_tbl
> + *
> + * rnpgbe_probe initializes a PF adapter identified by a pci_dev
> + * structure. The OS initialization, then call rnpgbe_add_adapter
> + * to initializes netdev.
> + *
> + * @return: 0 on success, negative on failure
> + **/

Nit, but think probe() is a pretty well known thing and doesn't 
typically have a function comment. Same comment applies for all of the 
pci_driver function implementations in this patch.

> +static int rnpgbe_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> +{
> +       int err;
> +
> +       err = pci_enable_device_mem(pdev);
> +       if (err)
> +               return err;
> +
> +       /* hw only support 56-bits dma mask */

I don't think this comment is necessary as DMA_BIT_MASK(56).

> +       err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(56));
> +       if (err) {
> +               dev_err(&pdev->dev,
> +                       "No usable DMA configuration, aborting\n");
> +               goto err_dma;
> +       }
> +
> +       err = pci_request_mem_regions(pdev, rnpgbe_driver_name);
> +       if (err) {
> +               dev_err(&pdev->dev,
> +                       "pci_request_selected_regions failed 0x%x\n", err);
> +               goto err_pci_req;
> +       }
> +
> +       pci_set_master(pdev);
> +       pci_save_state(pdev);
> +       err = rnpgbe_add_adapter(pdev);
> +       if (err)
> +               goto err_regions;
> +
> +       return 0;
> +err_regions:
> +       pci_release_mem_regions(pdev);
> +err_dma:
> +err_pci_req:
> +       pci_disable_device(pdev);
> +       return err;
> +}
> +
> +/**
> + * rnpgbe_rm_adapter - remove netdev for this mucse structure
> + * @mucse: pointer to private structure
> + *
> + * rnpgbe_rm_adapter remove a netdev for this mucse structure
> + **/
> +static void rnpgbe_rm_adapter(struct mucse *mucse)
> +{
> +       struct net_device *netdev;
> +
> +       netdev = mucse->netdev;
> +       free_netdev(netdev);
> +}
> +
> +/**
> + * rnpgbe_remove - Device Removal Routine
> + * @pdev: PCI device information struct
> + *
> + * rnpgbe_remove is called by the PCI subsystem to alert the driver
> + * that it should release a PCI device.  This could be caused by a
> + * Hot-Plug event, or because the driver is going to be removed from
> + * memory.
> + **/
> +static void rnpgbe_remove(struct pci_dev *pdev)
> +{
> +       struct mucse *mucse = pci_get_drvdata(pdev);
> +
> +       if (!mucse)
> +               return;
> +
> +       rnpgbe_rm_adapter(mucse);
> +       pci_release_mem_regions(pdev);
> +       pci_disable_device(pdev);
> +}
> +
> +/**
> + * rnpgbe_dev_shutdown - Device Shutdown Routine
> + * @pdev: PCI device information struct
> + * @enable_wake: wakeup status
> + **/
> +static void rnpgbe_dev_shutdown(struct pci_dev *pdev,
> +                               bool *enable_wake)
> +{
> +       struct mucse *mucse = pci_get_drvdata(pdev);
> +       struct net_device *netdev = mucse->netdev;
> +
> +       *enable_wake = false;
> +       netif_device_detach(netdev);
> +       pci_disable_device(pdev);
> +}
> +
> +/**
> + * rnpgbe_shutdown - Device Shutdown Routine
> + * @pdev: PCI device information struct
> + *
> + * rnpgbe_shutdown is called by the PCI subsystem to alert the driver
> + * that os shutdown. Device should setup wakeup state here.
> + **/
> +static void rnpgbe_shutdown(struct pci_dev *pdev)
> +{
> +       bool wake = false;

It seems like this will always be set in rnpgbe_dev_shutdown(), so it 
doesn't need to be initialized here.

> +
> +       rnpgbe_dev_shutdown(pdev, &wake);
> +
> +       if (system_state == SYSTEM_POWER_OFF) {
> +               pci_wake_from_d3(pdev, wake);
> +               pci_set_power_state(pdev, PCI_D3hot);
> +       }
> +}
> +
> +static struct pci_driver rnpgbe_driver = {
> +       .name = rnpgbe_driver_name,
> +       .id_table = rnpgbe_pci_tbl,
> +       .probe = rnpgbe_probe,
> +       .remove = rnpgbe_remove,
> +       .shutdown = rnpgbe_shutdown,
> +};
> +
> +/**
> + * rnpgbe_init_module - driver init routine
> + *
> + * rnpgbe_init_module is called when driver insmod
> + *
> + * @return: 0 on success, negative on failure
> + **/
> +static int __init rnpgbe_init_module(void)
> +{
> +       int ret;
> +
> +       ret = pci_register_driver(&rnpgbe_driver);
> +       if (ret)
> +               return ret;
> +
> +       return 0;
> +}
> +
> +module_init(rnpgbe_init_module);
> +
> +/**
> + * rnpgbe_exit_module - driver remove routine
> + *
> + * rnpgbe_exit_module is called when driver is removed
> + **/
> +static void __exit rnpgbe_exit_module(void)
> +{
> +       pci_unregister_driver(&rnpgbe_driver);
> +}
> +
> +module_exit(rnpgbe_exit_module);
> +
> +MODULE_DEVICE_TABLE(pci, rnpgbe_pci_tbl);
> +MODULE_AUTHOR("Mucse Corporation, <mucse@...se.com>");
> +MODULE_DESCRIPTION("Mucse(R) 1 Gigabit PCI Express Network Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
> 
> 

Powered by blists - more mailing lists