[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250721112455.23948-5-antoniu.miclaus@analog.com>
Date: Mon, 21 Jul 2025 14:24:45 +0300
From: Antoniu Miclaus <antoniu.miclaus@...log.com>
To: <jic23@...nel.org>, <robh@...nel.org>, <conor+dt@...nel.org>,
<devicetree@...r.kernel.org>, <linux-iio@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Antoniu Miclaus <antoniu.miclaus@...log.com>
Subject: [PATCH v2 5/5] Documentation: ABI: iio: adc: add ade9000 ABI
Add sysfs ABI documentation for the ADE9000 ADC driver,
documenting the device-specific attributes and interfaces.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
---
new in v2.
.../ABI/testing/sysfs-bus-iio-adc-ade9000 | 64 +++++++++++++++++++
1 file changed, 64 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ade9000
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ade9000 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ade9000
new file mode 100644
index 000000000000..fa92fd67483f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ade9000
@@ -0,0 +1,64 @@
+What: /sys/bus/iio/devices/iio:deviceX/wf_cap_en
+KernelVersion: 6.13
+Contact: linux-iio@...r.kernel.org
+Description:
+ Enable fixed data rate for waveform buffer instead of resampled data.
+ When enabled (1), the waveform buffer uses a fixed data rate.
+ When disabled (0), the waveform buffer uses resampled data.
+
+ This attribute is shared by all channels and represents a device-wide
+ setting that affects the entire waveform buffer configuration.
+ Changes immediately update the hardware configuration.
+
+ Reading: Returns current setting (0 or 1)
+ Writing: Accepts 0, 1
+
+What: /sys/bus/iio/devices/iio:deviceX/wf_mode
+KernelVersion: 6.13
+Contact: linux-iio@...r.kernel.org
+Description:
+ Waveform buffer filling and trigger mode configuration.
+
+ Valid values:
+ 0 - Stop when waveform buffer is full
+ 1 - Continuous fill, stop only on enabled trigger events
+ 2 - Continuous filling, center capture around enabled trigger events
+ 3 - Streaming mode
+
+ This attribute is shared by all channels and represents a device-wide
+ setting that affects the entire waveform buffer configuration.
+ Changes immediately update the hardware configuration.
+
+ Reading: Returns current mode (0-3)
+ Writing: Accepts values 0, 1, 2, or 3
+
+What: /sys/bus/iio/devices/iio:deviceX/wf_in_en
+KernelVersion: 6.13
+Contact: linux-iio@...r.kernel.org
+Description:
+ Enable IN waveform samples readout from waveform buffer.
+ When enabled (1), IN waveform samples are included in buffer readout.
+ When disabled (0), IN waveform samples are excluded from buffer readout.
+
+ This attribute is shared by all channels and represents a device-wide
+ setting that affects the entire waveform buffer configuration.
+ Changes immediately update the hardware configuration.
+
+ Reading: Returns current setting (0 or 1)
+ Writing: Accepts 0, 1
+
+What: /sys/bus/iio/devices/iio:deviceX/egy_time
+KernelVersion: 6.13
+Contact: linux-iio@...r.kernel.org
+Description:
+ Energy accumulation time setting for energy registers.
+ This value configures the time period over which energy
+ measurements are accumulated in the ADE9000 device.
+
+ This attribute is shared by all channels and represents a device-wide
+ setting that affects energy accumulation across all phases.
+ Changes immediately update the hardware configuration.
+
+ Reading: Returns current energy accumulation time value
+ Writing: Accepts any valid 32-bit unsigned integer value
+
--
2.49.0
Powered by blists - more mailing lists