| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250723233013.142337-9-rentao.bupt@gmail.com>
Date: Wed, 23 Jul 2025 16:30:04 -0700
From: rentao.bupt@...il.com
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org,
linux-kernel@...r.kernel.org,
Andrew Lunn <andrew@...n.ch>,
Tao Ren <taoren@...a.com>
Cc: Tao Ren <rentao.bupt@...il.com>
Subject: [PATCH v3 08/13] ARM: dts: aspeed: wedge400: Include wedge400-data64.dts
From: Tao Ren <rentao.bupt@...il.com>
Include "wedge400-data64.dts" in wedge400 dts to avoid duplicated code.
Wedge400-data64 and Wedge400 are identical except the BMC flash layout.
Signed-off-by: Tao Ren <rentao.bupt@...il.com>
---
Changes in v3:
- None (the patch is introduced in v3).
.../aspeed/aspeed-bmc-facebook-wedge400.dts | 366 +-----------------
1 file changed, 2 insertions(+), 364 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index 3e4d30f0884d..ef0cfc51cda4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -1,376 +1,14 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2019 Facebook Inc.
-/dts-v1/;
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include "ast2500-facebook-netbmc-common.dtsi"
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
/ {
model = "Facebook Wedge 400 BMC";
compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
-
- aliases {
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to
- * SCM (System Controller Module).
- */
- i2c16 = &imux16;
- i2c17 = &imux17;
- i2c18 = &imux18;
- i2c19 = &imux19;
- i2c20 = &imux20;
- i2c21 = &imux21;
- i2c22 = &imux22;
- i2c23 = &imux23;
-
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c24 = &imux24;
- i2c25 = &imux25;
- i2c26 = &imux26;
- i2c27 = &imux27;
- i2c28 = &imux28;
- i2c29 = &imux29;
- i2c30 = &imux30;
- i2c31 = &imux31;
-
- /*
- * PCA9548 (11-0076) provides 8 channels connecting to
- * FCM (Fan Controller Module).
- */
- i2c32 = &imux32;
- i2c33 = &imux33;
- i2c34 = &imux34;
- i2c35 = &imux35;
- i2c36 = &imux36;
- i2c37 = &imux37;
- i2c38 = &imux38;
- i2c39 = &imux39;
-
- spi2 = &spi_gpio;
- };
-
- chosen {
- stdout-path = &uart1;
- bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
- };
-
- ast-adc-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
- <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
- };
-
- /*
- * GPIO-based SPI Master is required to access SPI TPM, because
- * full-duplex SPI transactions are not supported by ASPEED SPI
- * Controllers.
- */
- spi_gpio: spi {
- status = "okay";
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
- sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
- miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
- num-chipselects = <1>;
-
- tpm@0 {
- compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
- spi-max-frequency = <33000000>;
- reg = <0>;
- };
- };
};
-/*
- * Both firmware flashes are 128MB on Wedge400 BMC.
- */
&fmc_flash0 {
+ /delete-node/partitions;
#include "facebook-bmc-flash-layout-128.dtsi"
};
-
-&fmc_flash1 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- flash1@0 {
- reg = <0x0 0x8000000>;
- label = "flash1";
- };
- };
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd2_default
- &pinctrl_rxd2_default>;
-};
-
-&uart4 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd4_default
- &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
- * communication.
- */
-&i2c0 {
- status = "okay";
- multi-master;
- bus-frequency = <1000000>;
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux16: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux17: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux18: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux19: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux20: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux21: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux22: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux23: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2c6 {
- status = "okay";
-};
-
-&i2c7 {
- status = "okay";
-};
-
-&i2c8 {
- status = "okay";
-
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux24: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux25: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux26: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux27: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux28: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux29: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux30: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux31: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c9 {
- status = "okay";
-};
-
-&i2c10 {
- status = "okay";
-};
-
-&i2c11 {
- status = "okay";
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux32: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux33: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux34: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux35: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux36: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux37: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux38: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux39: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c12 {
- status = "okay";
-};
-
-&i2c13 {
- status = "okay";
-};
-
-&adc {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&uhci {
- status = "okay";
-};
-
-&sdhci1 {
- max-frequency = <25000000>;
- /*
- * DMA mode needs to be disabled to avoid conflicts with UHCI
- * Controller in AST2500 SoC.
- */
- sdhci-caps-mask = <0x0 0x580000>;
-};
--
2.47.3
Powered by blists - more mailing lists