linux-kernel - Re: [PATCH v4 2/2] arm64: dts: qcom: qcs615-ride: add WiFi/BT nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <446cd45a-0284-4782-949e-2e5321545b96@kernel.org>
Date: Wed, 23 Jul 2025 14:12:34 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: "Yu Zhang(Yuriy)" <yu.zhang@....qualcomm.com>,
 Bjorn Andersson <andersson@...nel.org>,
 Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 2/2] arm64: dts: qcom: qcs615-ride: add WiFi/BT nodes

On 07/07/2025 04:51, Yu Zhang(Yuriy) wrote:
> Add a node for the PMU module of the WCN6855 present on the qcs615 ride
> board. Assign its LDO power outputs to the existing WiFi/BT module.
> 
> Signed-off-by: Yu Zhang(Yuriy) <yu.zhang@....qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs615-ride.dts | 135 +++++++++++++++++++++++++++++++
>  1 file changed, 135 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> index 011f8ae077c256f079ce1b07720374a9bf721488..2df8e7e3c1d3b6d6353a6753b8387c7411edd927 100644
> --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
> @@ -18,6 +18,7 @@ aliases {
>  		mmc0 = &sdhc_1;
>  		mmc1 = &sdhc_2;
>  		serial0 = &uart0;
> +		serial1 = &uart7;
>  	};
>  
>  	chosen {
> @@ -47,6 +48,85 @@ regulator-usb2-vbus {
>  		enable-active-high;
>  		regulator-always-on;
>  	};
> +
> +	vreg_conn_1p8: vreg_conn_1p8 {


Are you going to keep sending the same? Third or fourth time, even
though there were comments? Please take comments seriously and implement
them or at least RESPOND.

NAK

Best regards,
Krzysztof