linux-kernel - [PATCH 10/11] arm64: dts: rockchip: Enable USB 2.0 ports on ArmSoM Sige1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250723122323.2344916-11-jonas@kwiboo.se>
Date: Wed, 23 Jul 2025 12:23:08 +0000
From: Jonas Karlman <jonas@...boo.se>
To: Heiko Stuebner <heiko@...ech.de>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Vinod Koul <vkoul@...nel.org>,
	Kishon Vijay Abraham I <kishon@...nel.org>
Cc: Yao Zi <ziyao@...root.org>,
	Chukun Pan <amadeus@....edu.cn>,
	linux-rockchip@...ts.infradead.org,
	devicetree@...r.kernel.org,
	linux-phy@...ts.infradead.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	Jonas Karlman <jonas@...boo.se>
Subject: [PATCH 10/11] arm64: dts: rockchip: Enable USB 2.0 ports on ArmSoM Sige1

The ArmSoM Sige1 has two USB 2.0 Type-A HOST ports behind an onboard
USB hub, and one USB 2.0 Type-C OTG port.

Add support for using the USB 2.0 ports on ArmSoM Sige1.

The onboard USB hub handles OHCI so only the EHCI controller is enabled.

Signed-off-by: Jonas Karlman <jonas@...boo.se>
---
 .../boot/dts/rockchip/rk3528-armsom-sige1.dts | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts
index 6e21579365a5..d981c07a0a77 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts
@@ -434,6 +434,18 @@ &sdmmc {
 	status = "okay";
 };
 
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0m0_xfer>;
@@ -462,3 +474,15 @@ bluetooth {
 		vddio-supply = <&vcc_1v8>;
 	};
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&u2phy>;
+	maximum-speed = "high-speed";
+	phys = <&u2phy_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
-- 
2.50.1