linux-kernel - Re: [PATCH v4 2/2] arm64: dts: qcom: qcs615-ride: add WiFi/BT nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <8f10fc34-20ab-4edb-b4d1-d2e361f47751@oss.qualcomm.com>
Date: Thu, 24 Jul 2025 15:06:42 +0800
From: "Yu Zhang(Yuriy)" <yu.zhang@....qualcomm.com>
To: Krzysztof Kozlowski <krzk@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 2/2] arm64: dts: qcom: qcs615-ride: add WiFi/BT nodes



On 7/23/2025 8:12 PM, Krzysztof Kozlowski wrote:
> On 07/07/2025 04:51, Yu Zhang(Yuriy) wrote:
>> Add a node for the PMU module of the WCN6855 present on the qcs615 ride
>> board. Assign its LDO power outputs to the existing WiFi/BT module.
>>
>> Signed-off-by: Yu Zhang(Yuriy) <yu.zhang@....qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/qcs615-ride.dts | 135 +++++++++++++++++++++++++++++++
>>   1 file changed, 135 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
>> index 011f8ae077c256f079ce1b07720374a9bf721488..2df8e7e3c1d3b6d6353a6753b8387c7411edd927 100644
>> --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
>> +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
>> @@ -18,6 +18,7 @@ aliases {
>>   		mmc0 = &sdhc_1;
>>   		mmc1 = &sdhc_2;
>>   		serial0 = &uart0;
>> +		serial1 = &uart7;
>>   	};
>>   
>>   	chosen {
>> @@ -47,6 +48,85 @@ regulator-usb2-vbus {
>>   		enable-active-high;
>>   		regulator-always-on;
>>   	};
>> +
>> +	vreg_conn_1p8: vreg_conn_1p8 {
> 
> 
> Are you going to keep sending the same? Third or fourth time, even
> though there were comments? Please take comments seriously and implement
> them or at least RESPOND.
> 
I appreciate your comments and apologize for the repeated submissions. 
Due to a possible issue with my Thunderbird client, I did not receive 
earlier replies and was unaware of additional feedback.

The v3 and v4 revisions were based solely on Rob Herring’s suggestions 
and included some dependency adjustments and rebasing.

I will ensure to properly address and respond to all comments in future 
revisions.

Thanks a lot.

> NAK
> 
> Best regards,
> Krzysztof