[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <000001dbfc80$e85fd690$b91f83b0$@samsung.com>
Date: Thu, 24 Jul 2025 15:24:07 +0530
From: "Pritam Manohar Sutar" <pritam.sutar@...sung.com>
To: "'Alim Akhtar'" <alim.akhtar@...sung.com>, "'Krzysztof Kozlowski'"
<krzk@...nel.org>, "'Krzysztof Kozlowski'" <krzysztof.kozlowski@...aro.org>
Cc: <vkoul@...nel.org>, <kishon@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>, <andre.draszik@...aro.org>,
<peter.griffin@...aro.org>, <neil.armstrong@...aro.org>,
<kauschluss@...root.org>, <ivo.ivanov.ivanov1@...il.com>,
<m.szyprowski@...sung.com>, <s.nawrocki@...sung.com>,
<linux-phy@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-samsung-soc@...r.kernel.org>, <rosa.pila@...sung.com>,
<dev.tailor@...sung.com>, <faraz.ata@...sung.com>,
<muhammed.ali@...sung.com>, <selvarasu.g@...sung.com>
Subject: RE: [PATCH v4 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add
ExynosAutov920 HS phy compatible
Hi,
> -----Original Message-----
> From: Alim Akhtar <alim.akhtar@...sung.com>
> Sent: 23 July 2025 06:15 PM
> To: 'Krzysztof Kozlowski' <krzk@...nel.org>; 'Pritam Manohar Sutar'
> <pritam.sutar@...sung.com>; 'Krzysztof Kozlowski'
> <krzysztof.kozlowski@...aro.org>
> Cc: vkoul@...nel.org; kishon@...nel.org; robh@...nel.org;
> krzk+dt@...nel.org; conor+dt@...nel.org; andre.draszik@...aro.org;
> peter.griffin@...aro.org; neil.armstrong@...aro.org; kauschluss@...root.org;
> ivo.ivanov.ivanov1@...il.com; m.szyprowski@...sung.com;
> s.nawrocki@...sung.com; linux-phy@...ts.infradead.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org; linux-arm-
> kernel@...ts.infradead.org; linux-samsung-soc@...r.kernel.org;
> rosa.pila@...sung.com; dev.tailor@...sung.com;
> faraz.ata@...sung.com; muhammed.ali@...sung.com;
> selvarasu.g@...sung.com
> Subject: RE: [PATCH v4 1/6] dt-bindings: phy: samsung,usb3-drd-phy: add
> ExynosAutov920 HS phy compatible
>
>
>
> > -----Original Message-----
> > From: Krzysztof Kozlowski <krzk@...nel.org>
> > Sent: Wednesday, July 23, 2025 2:13 PM
> > To: Pritam Manohar Sutar <pritam.sutar@...sung.com>; 'Krzysztof
> > Kozlowski' <krzysztof.kozlowski@...aro.org>
> > Cc: vkoul@...nel.org; kishon@...nel.org; robh@...nel.org;
> [snip]
> > >>>>> Ok got it. Will change supplies name as below avdd075_usb =>
> > >>>>> avdd075-usb
> > >>>>> avdd18_usb20 => avdd18-usb20
> > >>>>> avdd33_usb20 => avdd33-usb20
> > >>>>>
> > >>>>> Confirm the above change that is meant in terms of DTS style.
> > >>>> Yes. I have doubts that actual supplies have suffix usb20. Are
> > >>>> there more than one avdd18 for this block?
> > >>>>
> > >>>
> > >>> Yes, there are more than one vdd18 supplies for this block.
> > >>
> > >> And their names are?
> > >>
> > >>>
> > >>> Re-analysed your comment on adding new supplies.
> > >>> Going to re-use existing supplies as mentioned below, rather than
> > >>> introducing new supplies
> > >>>
> > >>> dvdd-usb20-supply => for 0.75v
> > >>> vddh-usb20-supply => for 1.8v
> > >>> vdd33-usb20-supply => for 3.3v
> > >>
> > >>
> > >> You just expect us to guess whether this is correct...
> > >
> > > Sorry about not being clear so far.
> > >
> > > V920 needs three supplies, 0.75v, 1.8v and 3.3v for USB PHY The
> > > naming convention used in the schematic are avdd075-usb,
> > > avdd18_usb20, avdd33_usb20.
> > >
> > > However, PHY's user manual just mentions DVDD, VDD33 and VDD18.
> >
> >
> > Then dvdd, vdd33 and vdd18.
> >
> > > Since GS101 binding already using supply names similar to what is
> > mentioned in the PHY user manual.
> >
> >
> > GS101 has USB 2.0 and DP, thus the suffix made some sense. I think you
> > have only USB 2.0, that's why I question the suffix.
> >
> I cross checked the schematic of v920 SADK, this is a combo PHY which
> support USB-3.0 as well.
> @ Pritam
> Schema should capture all the supplies including USB-3.0, similar to GS101
> (which has USB2.0 and DP combo).
> So that would be as below:
> dvdd075-usb20-supply
> vdd18-usb20-supply
> vdd33-usb20-supply
> dvdd075-usb30-supply
> vdd18-usb30-supply
> please cross check the supply at your end and do the needful.
>
Yes, we have a combo PHY that supports USB20 and USB30 and
need these supplies. Will update the binding accordingly.
> >
> > Best regards,
> > Krzysztof
Thank you.
Regards,
Pritam
Powered by blists - more mailing lists