[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250725151618.0bc84bdb@kernel.org>
Date: Fri, 25 Jul 2025 15:16:18 -0700
From: Jakub Kicinski <kuba@...nel.org>
To: Lukasz Majewski <lukma@...x.de>
Cc: Andrew Lunn <andrew+netdev@...n.ch>, davem@...emloft.net, Eric Dumazet
<edumazet@...gle.com>, Paolo Abeni <pabeni@...hat.com>, Rob Herring
<robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer
<s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Richard Cochran
<richardcochran@...il.com>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org, Stefan Wahren
<wahrenst@....net>, Simon Horman <horms@...nel.org>
Subject: Re: [net-next v16 06/12] net: mtip: Add net_device_ops functions to
the L2 switch driver
On Fri, 25 Jul 2025 00:33:12 +0200 Lukasz Majewski wrote:
> +static void swap_buffer(void *bufaddr, int len)
> +{
> + int i;
> + unsigned int *buf = bufaddr;
> +
nit: reverse xmas tree
> + if (status & BD_ENET_TX_READY) {
> + /* All transmit buffers are full. Bail out.
> + * This should not happen, since dev->tbusy should be set.
> + */
> + netif_stop_queue(dev);
> + dev_err_ratelimited(&fep->pdev->dev, "%s: tx queue full!.\n",
> + dev->name);
> + spin_unlock(&fep->hw_lock);
As we discussed on previous revision you have many to one mapping
of netdevs to queues. I think the warning should only be printed
if the drivers is in "single netdev" mode. Otherwise it _will_
trigger.
BTW you should put the print after the unlock, console writes are slow.
> +static void mtip_timeout(struct net_device *dev, unsigned int txqueue)
> +{
> + struct mtip_ndev_priv *priv = netdev_priv(dev);
> + struct switch_enet_private *fep = priv->fep;
> + struct cbd_t *bdp;
> + int i;
> +
> + dev->stats.tx_errors++;
> +
> + if (IS_ENABLED(CONFIG_SWITCH_DEBUG)) {
why are you hiding the debug info under a CONFIG_ ?
(which BTW appears not to be defined at all)
Seems useful to know the state of the HW when the queue hung.
You can use a DO_ONCE() if you want to avoid spamming logs
> + /* Set buffer length and buffer pointer */
> + bufaddr = skb->data;
You should call skb_cow_data() if you want to write to the skb data.
> +static void mtip_timeout(struct net_device *dev, unsigned int txqueue)
> +{
> + struct mtip_ndev_priv *priv = netdev_priv(dev);
> + struct switch_enet_private *fep = priv->fep;
> + struct cbd_t *bdp;
> + int i;
> +
> + dev->stats.tx_errors++;
timeouts are already counted by the stack, I think the statistic
is exposed per-queue in sysfs
> + spin_lock_bh(&fep->hw_lock);
> + dev_info(&dev->dev, "%s: transmit timed out.\n", dev->name);
> + dev_info(&dev->dev,
> + "Ring data: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n",
> + (unsigned long)fep->cur_tx,
> + fep->tx_full ? " (full)" : "",
> + (unsigned long)fep->dirty_tx,
> + (unsigned long)fep->cur_rx);
> +
> + bdp = fep->tx_bd_base;
> + dev_info(&dev->dev, " tx: %u buffers\n", TX_RING_SIZE);
> + for (i = 0; i < TX_RING_SIZE; i++) {
> + dev_info(&dev->dev, " %08lx: %04x %04x %08x\n",
> + (kernel_ulong_t)bdp, bdp->cbd_sc,
> + bdp->cbd_datlen, (int)bdp->cbd_bufaddr);
> + bdp++;
> + }
> +
> + bdp = fep->rx_bd_base;
> + dev_info(&dev->dev, " rx: %lu buffers\n",
> + (unsigned long)RX_RING_SIZE);
> + for (i = 0 ; i < RX_RING_SIZE; i++) {
> + dev_info(&dev->dev, " %08lx: %04x %04x %08x\n",
> + (kernel_ulong_t)bdp,
> + bdp->cbd_sc, bdp->cbd_datlen,
> + (int)bdp->cbd_bufaddr);
> + bdp++;
> + }
> + spin_unlock_bh(&fep->hw_lock);
Powered by blists - more mailing lists