linux-kernel - Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <aIMTvUyHGd/ikKY9@localhost.localdomain>
Date: Thu, 24 Jul 2025 22:18:53 -0700
From: Tao Ren <rentao.bupt@...il.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>, Joel Stanley <joel@....id.au>,
	Andrew Jeffery <andrew@...econstruct.com.au>,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
	Tao Ren <taoren@...a.com>
Subject: Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64
 (AST2600) Board

On Thu, Jul 24, 2025 at 02:53:39PM +0200, Andrew Lunn wrote:
> On Wed, Jul 23, 2025 at 06:03:49PM -0700, Tao Ren wrote:
> > On Thu, Jul 24, 2025 at 02:03:20AM +0200, Andrew Lunn wrote:
> > > > +&mac3 {
> > > > +	status = "okay";
> > > > +	phy-mode = "rgmii";
> > > 
> > > Does the PCB have extra long clock lines to implement the 2ns delay?
> > > 
> > > 	Andrew
> > 
> > Hi Andrew,
> > 
> > Thank you for catching it. I didn't notice the settings because the file
> > is copied from the exiting fuji.dts with minor changes.
> > 
> > The delay is currently introduced on MAC side (by manually setting SCU
> > registers), but I guess I can update phy-mode to "rgmii-id" so the delay
> > can be handled by the PHY?
> 
> That would be good, if it works. The problem with the current code is
> that those SCU registers are not set as part of the MAC driver, so it
> is hard to know what value they have.
> 
> 	Andrew

Hi Andrew,

I set phy-mode to rgmii-id (letting BCM54616S handle RX/TX delay) and
cleared SCU350 (MAC3/4 RGMII delay) register, but somehow BMC is not
reachable over ethernet.

Let me see if I missed other settings. I will drop the mac entry from v4
if I cannot make it work by next Monday.

Thanks,

Tao