linux-kernel - Re: [PATCH v2 2/5] dt-bindings: iio: adc: add ade9000

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250727142410.63dc20fb@jic23-huawei>
Date: Sun, 27 Jul 2025 14:24:10 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Antoniu Miclaus <antoniu.miclaus@...log.com>
Cc: <robh@...nel.org>, <conor+dt@...nel.org>, <devicetree@...r.kernel.org>,
 <linux-iio@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/5] dt-bindings: iio: adc: add ade9000

On Mon, 21 Jul 2025 14:24:42 +0300
Antoniu Miclaus <antoniu.miclaus@...log.com> wrote:

> Add devicetree bindings support for ade9000.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
> ---
> changes in v2:
>  - move interrup-names near interrupts
>  - remove properties related to the waveform buffer and make them runtime attributes
>  - remove egy-time property and make it a runtime attribute.
>  - remove wf-src and use filter_type in the driver.
>  - add vref, vdd support.
>  - use adc standard channels instead of phase channels.
>  .../bindings/iio/adc/adi,ade9000.yaml         | 122 ++++++++++++++++++
>  1 file changed, 122 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
> new file mode 100644
> index 000000000000..0176252aae35
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2025 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ade9000.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADE9000 High Performance, Polyphase Energy Metering driver
> +
> +maintainers:
> +  - Antoniu Miclaus <antoniu.miclaus@...log.com>
> +
> +description: |
> +  The ADE9000 s a highly accurate, fully integrated, multiphase energy and power
> +  quality monitoring device. Superior analog performance and a digital signal
> +  processing (DSP) core enable accurate energy monitoring over a wide dynamic

Getting a bit marketing heavy for my liking!  Make just drop this sentence.

> +  range. An integrated high end reference ensures low drift over temperature
> +  with a combined drift of less than ±25 ppm/°C maximum for the entire channel
> +  including a programmable gain amplifier (PGA) and an analog-to- digital
> +  converter (ADC).
> +
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ADE9000.pdf
> +
> +$ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ade9000
> +
> +  reg:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  spi-max-frequency:
> +    maximum: 20000000
> +
> +  interrupts:
> +    maxItems: 2
> +
> +  interrupt-names:
> +    items:
> +      - const: irq0
> +      - const: irq1
> +
> +  reset-gpios:
> +    description: |
> +      Must be the device tree identifier of the RESET pin. As the line is
> +      active low, it should be marked GPIO_ACTIVE_LOW.
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  vref-supply: true
> +
> +patternProperties:
> +  "^channel@[0-2]$":
> +    $ref: /schemas/iio/adc/adc.yaml#
> +    type: object
> +
> +    properties:
> +      reg:
> +        description: The channel number (0-2 for phases A, B, C)
> +        minimum: 0
> +        maximum: 2
> +

What useful info is this providing?  Seems relatively unlikely anyone
will use a 3 phase power monitor for less than 3 phases.  It's not
required to have per channel nodes and many drivers don't because there
isn't anything channels specific in DT and we just leave them all on.

> +    required:
> +      - reg
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - interrupts
> +  - interrupt-names
> +  - vdd-supply
> +
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      adc@0 {
> +          compatible = "adi,ade9000";
> +          reg = <0>;
> +          spi-max-frequency = <7000000>;
> +
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +          reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
> +          interrupts = <2 IRQ_TYPE_EDGE_FALLING>, <3 IRQ_TYPE_EDGE_FALLING>;
> +          interrupt-names = "irq0", "irq1";
> +          interrupt-parent = <&gpio>;
> +          vdd-supply = <&vdd_reg>;
> +
> +          channel@0 {
> +            reg = <0>;
> +          };
> +          channel@1 {
> +            reg = <1>;
> +          };
> +          channel@2 {
> +            reg = <2>;
> +          };
> +      };
> +    };