| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250727193652.4029-2-krzysztof.kozlowski@linaro.org>
Date: Sun, 27 Jul 2025 21:36:53 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH] arm64: dts: qcom: sm8650: Sort nodes by unit address
Qualcomm DTS uses sorting of MMIO nodes by the unit address, so move
few nodes in SM8650 DTSI to fix that.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 414 +++++++++++++--------------
1 file changed, 207 insertions(+), 207 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index e14d3d778b71..2360d560dc86 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -3490,6 +3490,11 @@ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>,
};
};
+ rng: rng@...3000 {
+ compatible = "qcom,sm8650-trng", "qcom,trng";
+ reg = <0 0x010c3000 0 0x1000>;
+ };
+
cnoc_main: interconnect@...0000 {
compatible = "qcom,sm8650-cnoc-main";
reg = <0 0x01500000 0 0x14080>;
@@ -3561,11 +3566,6 @@ mmss_noc: interconnect@...0000 {
#interconnect-cells = <2>;
};
- rng: rng@...3000 {
- compatible = "qcom,sm8650-trng", "qcom,trng";
- reg = <0 0x010c3000 0 0x1000>;
- };
-
pcie0: pcie@...0000 {
device_type = "pci";
compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
@@ -3926,38 +3926,6 @@ pcie1_phy: phy@...e000 {
status = "disabled";
};
- cryptobam: dma-controller@...4000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0 0x01dc4000 0 0x28000>;
-
- interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
-
- #dma-cells = <1>;
-
- iommus = <&apps_smmu 0x480 0>,
- <&apps_smmu 0x481 0>;
-
- qcom,ee = <0>;
- qcom,num-ees = <4>;
- num-channels = <20>;
- qcom,controlled-remotely;
- };
-
- crypto: crypto@...a000 {
- compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
- reg = <0 0x01dfa000 0 0x6000>;
-
- interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
- interconnect-names = "memory";
-
- dmas = <&cryptobam 4>, <&cryptobam 5>;
- dma-names = "rx", "tx";
-
- iommus = <&apps_smmu 0x480 0>,
- <&apps_smmu 0x481 0>;
- };
-
ufs_mem_phy: phy@...0000 {
compatible = "qcom,sm8650-qmp-ufs-phy";
reg = <0 0x01d80000 0 0x2000>;
@@ -4079,6 +4047,38 @@ ice: crypto@...8000 {
clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
};
+ cryptobam: dma-controller@...4000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0 0x01dc4000 0 0x28000>;
+
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ #dma-cells = <1>;
+
+ iommus = <&apps_smmu 0x480 0>,
+ <&apps_smmu 0x481 0>;
+
+ qcom,ee = <0>;
+ qcom,num-ees = <4>;
+ num-channels = <20>;
+ qcom,controlled-remotely;
+ };
+
+ crypto: crypto@...a000 {
+ compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+ reg = <0 0x01dfa000 0 0x6000>;
+
+ interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "memory";
+
+ dmas = <&cryptobam 4>, <&cryptobam 5>;
+ dma-names = "rx", "tx";
+
+ iommus = <&apps_smmu 0x480 0>,
+ <&apps_smmu 0x481 0>;
+ };
+
tcsr_mutex: hwlock@...0000 {
compatible = "qcom,tcsr-mutex";
reg = <0 0x01f40000 0 0x20000>;
@@ -4962,6 +4962,176 @@ opp-202000000 {
};
};
+ usb_1_hsphy: phy@...3000 {
+ compatible = "qcom,sm8650-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e3000 0 0x154>;
+
+ clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_dp_qmpphy: phy@...8000 {
+ compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+ reg = <0 0x088e8000 0 0x3000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ reset-names = "phy",
+ "common";
+
+ power-domains = <&gcc USB3_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ orientation-switch;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dp_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp0_out>;
+ };
+ };
+ };
+ };
+
+ usb_1: usb@...8800 {
+ compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&pdc 14 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&tcsr TCSR_USB3_CLKREF_EN>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ iommus = <&apps_smmu 0x40 0>;
+
+ phys = <&usb_1_hsphy>,
+ <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,usb3_lpm_capable;
+ snps,usb2-lpm-disable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+
+ dma-coherent;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+ };
+ };
+ };
+ };
+ };
+
iris: video-codec@...0000 {
compatible = "qcom,sm8650-iris";
reg = <0 0x0aa00000 0 0xf0000>;
@@ -5580,176 +5750,6 @@ dispcc: clock-controller@...0000 {
#power-domain-cells = <1>;
};
- usb_1_hsphy: phy@...3000 {
- compatible = "qcom,sm8650-snps-eusb2-phy",
- "qcom,sm8550-snps-eusb2-phy";
- reg = <0 0x088e3000 0 0x154>;
-
- clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
- clock-names = "ref";
-
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb_dp_qmpphy: phy@...8000 {
- compatible = "qcom,sm8650-qmp-usb3-dp-phy";
- reg = <0 0x088e8000 0 0x3000>;
-
- clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "aux",
- "ref",
- "com_aux",
- "usb3_pipe";
-
- resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
- <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
- reset-names = "phy",
- "common";
-
- power-domains = <&gcc USB3_PHY_GDSC>;
-
- #clock-cells = <1>;
- #phy-cells = <1>;
-
- orientation-switch;
-
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- usb_dp_qmpphy_out: endpoint {
- };
- };
-
- port@1 {
- reg = <1>;
-
- usb_dp_qmpphy_usb_ss_in: endpoint {
- remote-endpoint = <&usb_1_dwc3_ss>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- usb_dp_qmpphy_dp_in: endpoint {
- remote-endpoint = <&mdss_dp0_out>;
- };
- };
- };
- };
-
- usb_1: usb@...8800 {
- compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
- reg = <0 0x0a6f8800 0 0x400>;
-
- interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
- <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
- <&pdc 14 IRQ_TYPE_EDGE_RISING>,
- <&pdc 15 IRQ_TYPE_EDGE_RISING>,
- <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "pwr_event",
- "hs_phy_irq",
- "dp_hs_phy_irq",
- "dm_hs_phy_irq",
- "ss_phy_irq";
-
- clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>,
- <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
- <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&tcsr TCSR_USB3_CLKREF_EN>;
- clock-names = "cfg_noc",
- "core",
- "iface",
- "sleep",
- "mock_utmi",
- "xo";
-
- assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <200000000>;
-
- resets = <&gcc GCC_USB30_PRIM_BCR>;
-
- interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
- &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
- <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
- &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
- interconnect-names = "usb-ddr",
- "apps-usb";
-
- power-domains = <&gcc USB30_PRIM_GDSC>;
- required-opps = <&rpmhpd_opp_nom>;
-
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- status = "disabled";
-
- usb_1_dwc3: usb@...0000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a600000 0 0xcd00>;
-
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
-
- iommus = <&apps_smmu 0x40 0>;
-
- phys = <&usb_1_hsphy>,
- <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
- phy-names = "usb2-phy",
- "usb3-phy";
-
- snps,hird-threshold = /bits/ 8 <0x0>;
- snps,usb2-gadget-lpm-disable;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- snps,is-utmi-l1-suspend;
- snps,usb3_lpm_capable;
- snps,usb2-lpm-disable;
- snps,has-lpm-erratum;
- tx-fifo-resize;
-
- dma-coherent;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- usb_1_dwc3_hs: endpoint {
- };
- };
-
- port@1 {
- reg = <1>;
-
- usb_1_dwc3_ss: endpoint {
- remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
- };
- };
- };
- };
- };
-
pdc: interrupt-controller@...0000 {
compatible = "qcom,sm8650-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
--
2.48.1
Powered by blists - more mailing lists