linux-kernel - Re: [PATCH v2] arm64: dts: qcom: Add initial audio support for Hamoa-IOT-EVK

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <172f1a38-d7a8-4799-ad44-f3eea69f297a@kernel.org>
Date: Mon, 28 Jul 2025 13:08:53 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: leqi@....qualcomm.com, Konrad Dybcio <konradybcio@...nel.org>,
 Bjorn Andersson <andersson@...nel.org>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] arm64: dts: qcom: Add initial audio support for
 Hamoa-IOT-EVK

On 28/07/2025 09:16, leqi via B4 Relay wrote:
> From: leqi <leqi@....qualcomm.com>
> 
> This patch adds initial audio codec support for the Hamoa-IOT-EVK board,
> including WCD9385 configuration, micbias voltage settings, GPIO reset,
> and power supply bindings. It enables basic audio functionality for
> further development. Basic test is good in Hamoa-IOT-EVK board.
> 
> Signed-off-by: leqi <leqi@....qualcomm.com>
> ---
> Changes in v2:
> - Updated author email address to leqi@....qualcomm.com.
> - Clarified that audio is validated with this change.
> - Link to v1: https://lore.kernel.org/all/20250723-initial_audio_support_for_qualcomm_hamoa_iot_evk_board-v1-1-816991701952@quicinc.com/
> ---
>  arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 232 +++++++++++++++++++++++++++++
>  1 file changed, 232 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> index 843f39c9d59286a9303a545411b2518d7649a059..91618e22e86c46c698b3639f60bc19314705b391 100644
> --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> @@ -124,6 +124,94 @@ pmic_glink_ss2_con_sbu_in: endpoint {


This was not merged, was it? Same comment as other patch, when you have
entire code ready send entire board. Not chunk by chunk.

You are not following properly release early, release often.

Best regards,
Krzysztof