lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20250731174201.GA2270846-robh@kernel.org>
Date: Thu, 31 Jul 2025 12:42:01 -0500
From: Rob Herring <robh@...nel.org>
To: Joy Zou <joy.zou@....com>
Cc: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>, linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org, imx@...ts.linux.dev,
	Frank Li <Frank.Li@....com>
Subject: Re: [PATCH v3 1/2] dt-bindings: regulator: add PF0900 regulator yaml

On Thu, Jul 31, 2025 at 06:44:41PM +0800, Joy Zou wrote:
> Add device binding doc for PF0900 PMIC driver.
> 
> Can not get the I2C_CRC_EN config by reading register. If the PMIC
> OTP_I2C_CRC_EN is enable, need to add the nxp,i2c-crc-enable property.
> 
> Signed-off-by: Joy Zou <joy.zou@....com>
> ---
> Changes for v3:
> 1. change regulator node names into lowercase.
> 2. add the following description for nxp,i2c-crc-enable.
>    The CRC enabled during register read/write. Controlled by customer
>    unviewable fuse bits OTP_I2C_CRC_EN. Check chip part number.
>    So can not get the I2C_CRC_EN config by reading register.
>    If the PMIC OTP_I2C_CRC_EN is enable, need to add this
>    property.
> 3. add more nxp,i2c-crc-enable description for commit message.
> 4. remove the unnecessary nxp,dvs-run/standby-voltage.
>    These changes come from review comments:
>    https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
> 5. add regulator-state-mem property for example.
> 
> Changes for v2:
> 1. modify the binding file name to match compatible string.
> 2. add one space for dt_binding_check warning.
> 3. remove unnecessary quotes from "VAON".
> 4. remove the unnecessary empty line.
> 5. move unevaluatedProperties after the $ref.
> 6. move additionalProperties after regulator type.
> 7. remove unnecessary regulator description
> ---
>  .../devicetree/bindings/regulator/nxp,pf0900.yaml  | 163 +++++++++++++++++++++
>  1 file changed, 163 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf0900.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf0900.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..8c8fc2cd4cedb0bef220d73f5cbc9a5f83072608
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/nxp,pf0900.yaml
> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/nxp,pf0900.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP PF0900 Power Management Integrated Circuit regulators
> +
> +maintainers:
> +  - Joy Zou <joy.zou@....com>
> +
> +description:
> +  The PF0900 is a power management integrated circuit (PMIC) optimized
> +  for high performance i.MX9x based applications. It features five high
> +  efficiency buck converters, three linear and one vaon regulators. It
> +  provides low quiescent current in Standby and low power off Modes.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,pf0900
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  regulators:
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      vaon:
> +        type: object
> +        $ref: regulator.yaml#
> +        unevaluatedProperties: false
> +
> +    patternProperties:
> +      "^ldo[1-3]$":
> +        type: object
> +        $ref: regulator.yaml#
> +        unevaluatedProperties: false
> +
> +      "^sw[1-5]$":
> +        type: object
> +        $ref: regulator.yaml#
> +        unevaluatedProperties: false
> +
> +  nxp,i2c-crc-enable:
> +    type: boolean
> +    description:
> +      The CRC enabled during register read/write. Controlled by customer
> +      unviewable fuse bits OTP_I2C_CRC_EN. Check chip part number.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - regulators
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        pmic@8 {
> +            compatible = "nxp,pf0900";
> +            reg = <0x08>;
> +            interrupt-parent = <&pcal6524>;
> +            interrupts = <89 IRQ_TYPE_LEVEL_LOW>;
> +            nxp,i2c-crc-enable;
> +
> +            regulators {
> +                vaon {
> +                    regulator-name = "VAON";
> +                    regulator-min-microvolt = <1800000>;
> +                    regulator-max-microvolt = <3300000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                };
> +
> +                sw1 {
> +                    regulator-name = "SW1";
> +                    regulator-min-microvolt = <500000>;
> +                    regulator-max-microvolt = <3300000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                    regulator-ramp-delay = <1950>;
> +                    regulator-state-mem {
> +                        regulator-on-in-suspend;
> +                        regulator-suspend-max-microvolt = <650000>;
> +                        regulator-suspend-min-microvolt = <650000>;
> +                    };
> +                };
> +
> +                sw2 {
> +                    regulator-name = "SW2";
> +                    regulator-min-microvolt = <300000>;
> +                    regulator-max-microvolt = <3300000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                    regulator-ramp-delay = <1950>;
> +                };
> +
> +                sw3 {
> +                    regulator-name = "SW3";
> +                    regulator-min-microvolt = <300000>;
> +                    regulator-max-microvolt = <3300000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                    regulator-ramp-delay = <1950>;
> +                };
> +
> +                sw4 {
> +                    regulator-name = "SW4";
> +                    regulator-min-microvolt = <300000>;
> +                    regulator-max-microvolt = <3300000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                    regulator-ramp-delay = <1950>;
> +                };
> +
> +                sw5 {
> +                    regulator-name = "SW5";
> +                    regulator-min-microvolt = <300000>;
> +                    regulator-max-microvolt = <3300000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                    regulator-ramp-delay = <1950>;
> +                };
> +
> +                ldo1 {
> +                    regulator-name = "LDO1";
> +                    regulator-min-microvolt = <750000>;
> +                    regulator-max-microvolt = <3300000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                };
> +
> +                ldo2 {
> +                    regulator-name = "LDO2";
> +                    regulator-min-microvolt = <650000>;
> +                    regulator-max-microvolt = <3300000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                };
> +
> +                ldo3 {
> +                    regulator-name = "LDO3";
> +                    regulator-min-microvolt = <650000>;
> +                    regulator-max-microvolt = <3300000>;
> +                    regulator-boot-on;
> +                    regulator-always-on;
> +                };
> +            };
> +        };
> +     };

Wrong indentation. Otherwise,

Reviewed-by: Rob Herring (Arm) <robh@...nel.org>

Rob

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ