| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250731-dt-bindings-ufs-qcom-v2-3-53bb634bf95a@linaro.org>
Date: Thu, 31 Jul 2025 09:15:54 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>, Bart Van Assche <bvanassche@....org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Manivannan Sadhasivam <mani@...nel.org>,
Bjorn Andersson <andersson@...nel.org>, Andy Gross <agross@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-scsi@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Ram Kumar Dwivedi <quic_rdwivedi@...cinc.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v2 3/3] dt-bindings: ufs: qcom: Split SM8650 and similar
The binding for Qualcomm SoC UFS controllers grew and it will grow
further. Split SM8650 and SM8750 UFS controllers which:
1. Do not reference ICE as IO address space, but as phandle,
2. Have same order of clocks.
3. Have MCQ IO address space. Document that MCQ address space as
optional to maintain backwards compatibility and because Linux
drivers can operate perfectly fine without it (thus without MCQ
feature). Linux driver already uses "mcq" as possible name for
"reg-names" property.
The split allows easier review and maintenance of the binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml | 178 +++++++++++++++++++++
.../devicetree/bindings/ufs/qcom,ufs.yaml | 32 ----
2 files changed, 178 insertions(+), 32 deletions(-)
diff --git a/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml b/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..aaa0bbb5bfe1673e3e0d25812c2829350b137abb
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/qcom,sm8650-ufshc.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/qcom,sm8650-ufshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 and Other SoCs UFS Controllers
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@...aro.org>
+
+# Select only our matches, not all jedec,ufs-2.0
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8650-ufshc
+ - qcom,sm8750-ufshc
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,sm8650-ufshc
+ - qcom,sm8750-ufshc
+ - const: qcom,ufshc
+ - const: jedec,ufs-2.0
+
+ reg:
+ minItems: 1
+ maxItems: 2
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: std
+ - const: mcq
+
+ clocks:
+ minItems: 8
+ maxItems: 8
+
+ clock-names:
+ items:
+ - const: core_clk
+ - const: bus_aggr_clk
+ - const: iface_clk
+ - const: core_clk_unipro
+ - const: ref_clk
+ - const: tx_lane0_sync_clk
+ - const: rx_lane0_sync_clk
+ - const: rx_lane1_sync_clk
+
+ qcom,ice:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the Inline Crypto Engine node
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: qcom,ufs-common.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8650-gcc.h>
+ #include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ufshc@...4000 {
+ compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x0 0x01d84000 0x0 0x3000>;
+
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "ufs-ddr",
+ "cpu-ufs";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ operating-points-v2 = <&ufs_opp_table>;
+
+ iommus = <&apps_smmu 0x60 0>;
+
+ lanes-per-direction = <2>;
+ qcom,ice = <&ice>;
+
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+
+ #reset-cells = <1>;
+
+ vcc-supply = <&vreg_l7b_2p5>;
+ vcc-max-microamp = <1100000>;
+ vccq-supply = <&vreg_l9b_1p2>;
+ vccq-max-microamp = <1200000>;
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <100000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-201500000 {
+ opp-hz = /bits/ 64 <201500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <201500000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-403000000 {
+ opp-hz = /bits/ 64 <403000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <403000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index 191b88120d139a47632e3dce3d3f3a37d7a55c72..1dd41f6d5258014d59c8c8005bc54f7994351a52 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -24,8 +24,6 @@ select:
- qcom,sm6125-ufshc
- qcom,sm6350-ufshc
- qcom,sm8150-ufshc
- - qcom,sm8650-ufshc
- - qcom,sm8750-ufshc
required:
- compatible
@@ -41,8 +39,6 @@ properties:
- qcom,sm6125-ufshc
- qcom,sm6350-ufshc
- qcom,sm8150-ufshc
- - qcom,sm8650-ufshc
- - qcom,sm8750-ufshc
- const: qcom,ufshc
- const: jedec,ufs-2.0
@@ -66,34 +62,6 @@ required:
allOf:
- $ref: qcom,ufs-common.yaml
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sm8650-ufshc
- - qcom,sm8750-ufshc
- then:
- properties:
- clocks:
- minItems: 8
- maxItems: 8
- clock-names:
- items:
- - const: core_clk
- - const: bus_aggr_clk
- - const: iface_clk
- - const: core_clk_unipro
- - const: ref_clk
- - const: tx_lane0_sync_clk
- - const: rx_lane0_sync_clk
- - const: rx_lane1_sync_clk
- reg:
- minItems: 1
- maxItems: 1
- reg-names:
- maxItems: 1
-
- if:
properties:
compatible:
--
2.48.1
Powered by blists - more mailing lists