lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250801-wake_irq_support-v4-0-6b6639013a1a@oss.qualcomm.com>
Date: Fri, 01 Aug 2025 16:29:41 +0530
From: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        cros-qcom-dts-watchers@...omium.org,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Pavel Machek <pavel@...nel.org>, Len Brown <lenb@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Danilo Krummrich <dakr@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
        quic_vbadigan@...cinc.com, quic_mrana@...cinc.com, sherry.sun@....com,
        linux-pm@...r.kernel.org,
        Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>,
        Konrad Dybcio <konrad.dybcio@....qualcomm.com>,
        Manivannan Sadhasivam <mani@...nel.org>
Subject: [PATCH v4 0/3] PCI: Add support for PCIe WAKE# interrupt

PCIe WAKE# interrupt is needed for bringing back PCIe device state from
D3cold to D0.

This is pending from long time, there was two attempts done previously to
add WAKE# support[1], [2]. Those series tried to add support for legacy
interrupts along with WAKE#. Legacy interrupts are already available in
the latest kernel and we can ignore them. For the wake IRQ the series is
trying to use interrupts property define in the device tree.

This series is using gpio property instead of interrupts, from
gpio desc driver will allocate the dedicate IRQ.

According to the PCIe specification 6, sec 5.3.3.2, there are two defined
wakeup mechanisms: Beacon and WAKE# for the Link wakeup mechanisms to
provide a means of signaling the platform to re-establish power and
reference clocks to the components within its domain. Adding WAKE#
support in PCI framework.

According to the PCIe specification, multiple WAKE# signals can exist in a
system. In configurations involving a PCIe switch, each downstream port
(DSP) of the switch may be connected to a separate WAKE# line, allowing
each endpoint to signal WAKE# independently. To support this, the WAKE#
should be described in the device tree node of the upstream bridge to which
the endpoint is connected. For example, in a switch-based topology, the
WAKE# GPIO can be defined in the DSP of the switch. In a direct connection
scenario, the WAKE# can be defined in the root port. If all endpoints share
a single WAKE# line, the GPIO should be defined in the root port.

During endpoint probe, the driver searches for the WAKE# in its immediate
upstream bridge. If not found, it continues walking up the hierarchy until
it either finds a WAKE# or reaches the root port. Once found, the driver
registers the wake IRQ in shared mode, as the WAKE# may be shared among
multiple endpoints.

When the IRQ is asserted, the wake handler triggers a pm_runtime_resume().
The PM framework ensures that the parent device is resumed before the
child i.e controller driver which can bring back link to D0.

WAKE# is added in dts schema and merged based on this patch.
https://lore.kernel.org/all/20250515090517.3506772-1-krishna.chundru@oss.qualcomm.com/

[1]: https://lore.kernel.org/all/b2b91240-95fe-145d-502c-d52225497a34@nvidia.com/T/
[2]: https://lore.kernel.org/all/20171226023646.17722-1-jeffy.chen@rock-chips.com/

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
---
Changes in v4:
- Move wake from portdrv to core framework to endpoint (Bjorn).
- Added support for multiple WAKE# case (Bjorn). But traverse from
  endpoint upstream port to root port till you get WAKE#. And use
  IRQF_SHARED flag for requesting interrupts.
- Link to v3: https://lore.kernel.org/r/20250605-wake_irq_support-v3-0-7ba56dc909a5@oss.qualcomm.com

Changes in v3:
- Update the commit messages, function names etc as suggested by Mani.
- return wake_irq if returns error (Neil).
- Link to v2: https://lore.kernel.org/r/20250419-wake_irq_support-v2-0-06baed9a87a1@oss.qualcomm.com

Changes in v2:
- Move the wake irq teardown after pcie_port_device_remove
  and move of_pci_setup_wake_irq before pcie_link_rcec (Lukas)
- teardown wake irq in shutdown also.
- Link to v1: https://lore.kernel.org/r/20250401-wake_irq_support-v1-0-d2e22f4a0efd@oss.qualcomm.com

---
Krishna Chaitanya Chundru (3):
      arm64: dts: qcom: sc7280: Add wake GPIO
      PM: sleep: wakeirq: Add support for custom IRQ flags in dedicated wake IRQ setup
      PCI: Add support for PCIe WAKE# interrupt

 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts   |  1 +
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi |  1 +
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi       |  1 +
 drivers/base/power/wakeirq.c                   | 43 +++++++++++++++--
 drivers/pci/of.c                               | 66 ++++++++++++++++++++++++++
 drivers/pci/pci-driver.c                       | 10 ++++
 drivers/pci/pci.h                              | 10 ++++
 drivers/pci/probe.c                            |  2 +
 drivers/pci/remove.c                           |  1 +
 include/linux/pci.h                            |  2 +
 include/linux/pm_wakeirq.h                     |  6 +++
 11 files changed, 138 insertions(+), 5 deletions(-)
---
base-commit: 5f10a4bfd256d0ff64ef13baf7af7b1adf00740c
change-id: 20250329-wake_irq_support-79772fc8cd44

Best regards,
-- 
Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ