[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250804085630.1082251-1-neeraj.sanjaykale@nxp.com>
Date: Mon, 4 Aug 2025 14:26:30 +0530
From: Neeraj Sanjay Kale <neeraj.sanjaykale@....com>
To: marcel@...tmann.org,
luiz.dentz@...il.com
Cc: linux-bluetooth@...r.kernel.org,
linux-kernel@...r.kernel.org,
amitkumar.karwar@....com,
sherry.sun@....com,
neeraj.sanjaykale@....com
Subject: [PATCH v1] Bluetooth: btnxpuart: Uses threaded IRQ for host wakeup handling
This replaces devm_request_irq() with devm_request_threaded_irq().
On iMX93 11x11 EVK platform, the BT chip's BT_WAKE_OUT pin is connected
to an I2C GPIO expander instead of directly been connected to iMX GPIO.
When I2C GPIO expander's (PCAL6524) host driver receives an interrupt on
it's INTR line, the driver's interrupt handler needs to query the
interrupt source with PCAL6524 first, and then call the actual interrupt
handler, in this case the IRQ handler in BTNXPUART.
In order to handle interrupts when such I2C GPIO expanders are between
the host and interrupt source, devm_request_threaded_irq() is needed.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@....com>
---
drivers/bluetooth/btnxpuart.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 73a4a325c867..76e7f857fb7d 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -543,10 +543,10 @@ static int ps_setup(struct hci_dev *hdev)
}
if (psdata->wakeup_source) {
- ret = devm_request_irq(&serdev->dev, psdata->irq_handler,
- ps_host_wakeup_irq_handler,
- IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
- dev_name(&serdev->dev), nxpdev);
+ ret = devm_request_threaded_irq(&serdev->dev, psdata->irq_handler,
+ NULL, ps_host_wakeup_irq_handler,
+ IRQF_ONESHOT,
+ dev_name(&serdev->dev), nxpdev);
if (ret)
bt_dev_info(hdev, "error setting wakeup IRQ handler, ignoring\n");
disable_irq(psdata->irq_handler);
--
2.34.1
Powered by blists - more mailing lists