lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aJCkE_80YfYUWIzZ@linux.ibm.com>
Date: Mon, 4 Aug 2025 17:44:11 +0530
From: Vishal Chourasia <vishalc@...ux.ibm.com>
To: Donet Tom <donettom@...ux.ibm.com>
Cc: Madhavan Srinivasan <maddy@...ux.ibm.com>,
        Christophe Leroy <christophe.leroy@...roup.eu>,
        linuxppc-dev@...ts.ozlabs.org, Ritesh Harjani <ritesh.list@...il.com>,
        linux-kernel@...r.kernel.org, Michael Ellerman <mpe@...erman.id.au>,
        Nicholas Piggin <npiggin@...il.com>, stable@...r.kernel.org
Subject: Re: [PATCH v2] powerpc/mm: Fix SLB multihit issue during SLB preload

On Fri, Aug 01, 2025 at 04:07:47PM +0530, Donet Tom wrote:
> On systems using the hash MMU, there is a software SLB preload cache that
> mirrors the entries loaded into the hardware SLB buffer. This preload
> cache is subject to periodic eviction — typically after every 256 context
> switches — to remove old entry.
> 
> To optimize performance, the kernel skips switch_mmu_context() in
> switch_mm_irqs_off() when the prev and next mm_struct are the same.
> However, on hash MMU systems, this can lead to inconsistencies between
> the hardware SLB and the software preload cache.
> 
> If an SLB entry for a process is evicted from the software cache on one
> CPU, and the same process later runs on another CPU without executing
> switch_mmu_context(), the hardware SLB may retain stale entries. If the
> kernel then attempts to reload that entry, it can trigger an SLB
> multi-hit error.
> 
> The following timeline shows how stale SLB entries are created and can
> cause a multi-hit error when a process moves between CPUs without a
> MMU context switch.
> 
> CPU 0                                   CPU 1
> -----                                    -----
> Process P
> exec                                    swapper/1
>  load_elf_binary
>   begin_new_exc
>     activate_mm
>      switch_mm_irqs_off
>       switch_mmu_context
>        switch_slb
>        /*
>         * This invalidates all
>         * the entries in the HW
>         * and setup the new HW
>         * SLB entries as per the
>         * preload cache.
>         */
> context_switch
> sched_migrate_task migrates process P to cpu-1
> 
> Process swapper/0                       context switch (to process P)
> (uses mm_struct of Process P)           switch_mm_irqs_off()
>                                          switch_slb
>                                            load_slb++
>                                             /*
>                                             * load_slb becomes 0 here
>                                             * and we evict an entry from
>                                             * the preload cache with
>                                             * preload_age(). We still
>                                             * keep HW SLB and preload
>                                             * cache in sync, that is
>                                             * because all HW SLB entries
>                                             * anyways gets evicted in
>                                             * switch_slb during SLBIA.
>                                             * We then only add those
>                                             * entries back in HW SLB,
>                                             * which are currently
>                                             * present in preload_cache
>                                             * (after eviction).
>                                             */
>                                         load_elf_binary continues...
>                                          setup_new_exec()
>                                           slb_setup_new_exec()
> 
>                                         sched_switch event
>                                         sched_migrate_task migrates
>                                         process P to cpu-0
> 
> context_switch from swapper/0 to Process P
>  switch_mm_irqs_off()
>   /*
>    * Since both prev and next mm struct are same we don't call
>    * switch_mmu_context(). This will cause the HW SLB and SW preload
>    * cache to go out of sync in preload_new_slb_context. Because there
>    * was an SLB entry which was evicted from both HW and preload cache
>    * on cpu-1. Now later in preload_new_slb_context(), when we will try
>    * to add the same preload entry again, we will add this to the SW
>    * preload cache and then will add it to the HW SLB. Since on cpu-0
>    * this entry was never invalidated, hence adding this entry to the HW
>    * SLB will cause a SLB multi-hit error.
>    */
> load_elf_binary continues...
>  START_THREAD
>   start_thread
>    preload_new_slb_context
>    /*
>     * This tries to add a new EA to preload cache which was earlier
>     * evicted from both cpu-1 HW SLB and preload cache. This caused the
>     * HW SLB of cpu-0 to go out of sync with the SW preload cache. The
>     * reason for this was, that when we context switched back on CPU-0,
>     * we should have ideally called switch_mmu_context() which will
>     * bring the HW SLB entries on CPU-0 in sync with SW preload cache
>     * entries by setting up the mmu context properly. But we didn't do
>     * that since the prev mm_struct running on cpu-0 was same as the
>     * next mm_struct (which is true for swapper / kernel threads). So
>     * now when we try to add this new entry into the HW SLB of cpu-0,
>     * we hit a SLB multi-hit error.
>     */
> 
> WARNING: CPU: 0 PID: 1810970 at arch/powerpc/mm/book3s64/slb.c:62
> assert_slb_presence+0x2c/0x50(48 results) 02:47:29 [20157/42149]
> Modules linked in:
> CPU: 0 UID: 0 PID: 1810970 Comm: dd Not tainted 6.16.0-rc3-dirty #12
> VOLUNTARY
> Hardware name: IBM pSeries (emulated by qemu) POWER8 (architected)
> 0x4d0200 0xf000004 of:SLOF,HEAD hv:linux,kvm pSeries
> NIP:  c00000000015426c LR: c0000000001543b4 CTR: 0000000000000000
> REGS: c0000000497c77e0 TRAP: 0700   Not tainted  (6.16.0-rc3-dirty)
> MSR:  8000000002823033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE>  CR: 28888482  XER: 00000000
> CFAR: c0000000001543b0 IRQMASK: 3
> <...>
> NIP [c00000000015426c] assert_slb_presence+0x2c/0x50
> LR [c0000000001543b4] slb_insert_entry+0x124/0x390
> Call Trace:
>   0x7fffceb5ffff (unreliable)
>   preload_new_slb_context+0x100/0x1a0
>   start_thread+0x26c/0x420
>   load_elf_binary+0x1b04/0x1c40
>   bprm_execve+0x358/0x680
>   do_execveat_common+0x1f8/0x240
>   sys_execve+0x58/0x70
>   system_call_exception+0x114/0x300
>   system_call_common+0x160/0x2c4
> 
> To fix this issue, we add a code change to always switch the MMU context on
> hash MMU if the SLB preload cache has aged. With this change, the
> SLB multi-hit error no longer occurs.
> 
> cc: Christophe Leroy <christophe.leroy@...roup.eu>
> cc: Ritesh Harjani (IBM) <ritesh.list@...il.com>
> cc: Michael Ellerman <mpe@...erman.id.au>
> cc: Nicholas Piggin <npiggin@...il.com>
> Fixes: 5434ae74629a ("powerpc/64s/hash: Add a SLB preload cache")
> cc: stable@...r.kernel.org
> Suggested-by: Ritesh Harjani (IBM) <ritesh.list@...il.com>
> Signed-off-by: Donet Tom <donettom@...ux.ibm.com>
> ---
> 
> v1 -> v2 : Changed commit message and added a comment in
> switch_mm_irqs_off()
> 
> v1 - https://lore.kernel.org/all/20250731161027.966196-1-donettom@linux.ibm.com/
> ---
>  arch/powerpc/mm/book3s64/slb.c | 2 +-
>  arch/powerpc/mm/mmu_context.c  | 7 +++++--
>  2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/powerpc/mm/book3s64/slb.c b/arch/powerpc/mm/book3s64/slb.c
> index 6b783552403c..08daac3f978c 100644
> --- a/arch/powerpc/mm/book3s64/slb.c
> +++ b/arch/powerpc/mm/book3s64/slb.c
> @@ -509,7 +509,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
>  	 * SLB preload cache.
>  	 */
>  	tsk->thread.load_slb++;
> -	if (!tsk->thread.load_slb) {
> +	if (tsk->thread.load_slb == U8_MAX) {
>  		unsigned long pc = KSTK_EIP(tsk);
>  
>  		preload_age(ti);
> diff --git a/arch/powerpc/mm/mmu_context.c b/arch/powerpc/mm/mmu_context.c
> index 3e3af29b4523..95455d787288 100644
> --- a/arch/powerpc/mm/mmu_context.c
> +++ b/arch/powerpc/mm/mmu_context.c
> @@ -83,8 +83,11 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
>  	/* Some subarchs need to track the PGD elsewhere */
>  	switch_mm_pgdir(tsk, next);
>  
> -	/* Nothing else to do if we aren't actually switching */
> -	if (prev == next)
> +	/*
> +	 * Nothing else to do if we aren't actually switching and
> +	 * the preload slb cache has not aged
> +	 */
> +	if ((prev == next) && (tsk->thread.load_slb != U8_MAX))
>  		return;
>  
>  	/*
> -- 
> 2.50.1
> 
LGTM.

Reviewed-by: Vishal Chourasia <vishalc@...ux.ibm.com>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ