[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <zjcwfs4litbfhrq2ho6znuoiwzytp3ty7kwxn6obf6hle73nui@ez6xsjluwoki>
Date: Thu, 7 Aug 2025 13:36:30 +0100
From: Nuno Sá <noname.nuno@...il.com>
To: Matti Vaittinen <mazziesaccount@...il.com>
Cc: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>,
Lars-Peter Clausen <lars@...afoo.de>, Michael Hennerich <Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>, David Lechner <dlechner@...libre.com>,
Nuno Sá <nuno.sa@...log.com>, Andy Shevchenko <andy@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 04/10] iio: adc: ad7476: Use correct channel for bit
info
On Thu, Aug 07, 2025 at 12:34:30PM +0300, Matti Vaittinen wrote:
> The ad7476 supports ADCs which use separate GPIO for starting the
> conversion. For such devices, the driver uses different channel
> information if the GPIO is found. The bit information is still always
> used from the original (non 'convstart') channels.
>
> This has not been causing problems because the bit information for the
> 'convstart' -channel and the 'normal' -channel is identical. It,
> however, will cause issues if an IC has different characteristics for an
> 'convstart' -channel and regular channel. Furthermore, this will cause
> problems if a device always requires the convstart GPIO and thus only
> defines the convstart channel.
>
> Signed-off-by: Matti Vaittinen <mazziesaccount@...il.com>
> ---
> Revision history:
> v1 => :
> - No changes
> ---
Reviewed-by: Nuno Sá <nuno.sa@...log.com>
> drivers/iio/adc/ad7476.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
> index 7b6d36999afc..fc701267358e 100644
> --- a/drivers/iio/adc/ad7476.c
> +++ b/drivers/iio/adc/ad7476.c
> @@ -121,8 +121,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
>
> if (ret < 0)
> return ret;
> - *val = (ret >> st->chip_info->channel[0].scan_type.shift) &
> - GENMASK(st->chip_info->channel[0].scan_type.realbits - 1, 0);
> + *val = (ret >> chan->scan_type.shift) &
> + GENMASK(chan->scan_type.realbits - 1, 0);
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_SCALE:
> *val = st->scale_mv;
> @@ -345,7 +345,7 @@ static int ad7476_probe(struct spi_device *spi)
> /* Setup default message */
>
> st->xfer.rx_buf = &st->data;
> - st->xfer.len = st->chip_info->channel[0].scan_type.storagebits / 8;
> + st->xfer.len = indio_dev->channels[0].scan_type.storagebits / 8;
>
> spi_message_init(&st->msg);
> spi_message_add_tail(&st->xfer, &st->msg);
> --
> 2.50.1
>
Powered by blists - more mailing lists