linux-kernel - [PATCH v4 4/6] phy: qcom: qmp-combo: introduce QMPPHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250807-topic-4ln_dp_respin-v4-4-43272d6eca92@oss.qualcomm.com>
Date: Thu, 07 Aug 2025 18:33:22 +0200
From: Konrad Dybcio <konradybcio@...nel.org>
To: Vinod Koul <vkoul@...nel.org>, 
 Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>
Cc: Marijn Suijten <marijn.suijten@...ainline.org>, 
 linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Konrad Dybcio <konrad.dybcio@....qualcomm.com>, 
 Neil Armstrong <neil.armstrong@...aro.org>
Subject: [PATCH v4 4/6] phy: qcom: qmp-combo: introduce QMPPHY_MODE

From: Neil Armstrong <neil.armstrong@...aro.org>

Introduce an enum for the QMP Combo PHY modes, use it in the
QMP commmon phy init function and default to COMBO mode.

Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
[konrad: some renaming and rewording]
Signed-off-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 44 +++++++++++++++++++++++++++----
 1 file changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 8395035754975808ee1b5b9c48d046a719e79e60..c65837fc9e4c38673fc61d3ae66072ba5a265a70 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -62,6 +62,12 @@
 
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
 
+enum qmpphy_mode {
+	QMPPHY_MODE_USB3DP = 0,
+	QMPPHY_MODE_DP_ONLY,
+	QMPPHY_MODE_USB3_ONLY,
+};
+
 /* set of registers with offsets different per-PHY */
 enum qphy_reg_layout {
 	/* PCS registers */
@@ -1844,6 +1850,7 @@ struct qmp_combo {
 
 	struct mutex phy_mutex;
 	int init_count;
+	enum qmpphy_mode qmpphy_mode;
 
 	struct phy *usb_phy;
 	enum phy_mode phy_mode;
@@ -3037,12 +3044,33 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
 	if (qmp->orientation == TYPEC_ORIENTATION_REVERSE)
 		val |= SW_PORTSELECT_VAL;
 	writel(val, com + QPHY_V3_DP_COM_TYPEC_CTRL);
-	writel(USB3_MODE | DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
 
-	/* bring both QMP USB and QMP DP PHYs PCS block out of reset */
-	qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
-			SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
-			SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+	switch (qmp->qmpphy_mode) {
+	case QMPPHY_MODE_USB3DP:
+		writel(USB3_MODE | DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
+
+		/* bring both QMP USB and QMP DP PHYs PCS block out of reset */
+		qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+				SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
+				SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+		break;
+
+	case QMPPHY_MODE_DP_ONLY:
+		writel(DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
+
+		/* bring QMP DP PHY PCS block out of reset */
+		qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+				SW_DPPHY_RESET_MUX | SW_DPPHY_RESET);
+		break;
+
+	case QMPPHY_MODE_USB3_ONLY:
+		writel(USB3_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
+
+		/* bring QMP USB PHY PCS block out of reset */
+		qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
+				SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
+		break;
+	}
 
 	qphy_clrbits(com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
 	qphy_clrbits(com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
@@ -4053,6 +4081,12 @@ static int qmp_combo_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_node_put;
 
+	/*
+	 * The hw default is USB3_ONLY, but USB3+DP mode lets us more easily
+	 * check both sub-blocks' init tables for blunders at probe time.
+	 */
+	qmp->qmpphy_mode = QMPPHY_MODE_USB3DP;
+
 	qmp->usb_phy = devm_phy_create(dev, usb_np, &qmp_combo_usb_phy_ops);
 	if (IS_ERR(qmp->usb_phy)) {
 		ret = PTR_ERR(qmp->usb_phy);

-- 
2.50.1