| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ff3d87634aedec28e7103f16a35031bfe86ca501.camel@physik.fu-berlin.de> Date: Sat, 09 Aug 2025 08:42:37 +0200 From: John Paul Adrian Glaubitz <glaubitz@...sik.fu-berlin.de> To: Anthony Yznaga <anthony.yznaga@...cle.com>, sparclinux@...r.kernel.org, davem@...emloft.net, andreas@...sler.com Cc: linux-kernel@...r.kernel.org, agordeev@...ux.ibm.com, will@...nel.org, ryan.roberts@....com, david@...hat.com, osalvador@...e.de Subject: Re: [PATCH] sparc64: fix hugetlb for sun4u Hi Anthony, On Sat, 2025-08-09 at 08:26 +0200, John Paul Adrian Glaubitz wrote: > > OK, first data point: Setting CONFIG_TRANSPARENT_HUGEPAGE_NEVER=y causes the backtrace during > > boot to disappear with CONFIG_TRANSPARENT_HUGEPAGE=y. However, it still disappears later when > > running "apt update && apt -y upgrade" again: > > That was meant to say "it appears later", of course. > > So, again. No backtrace during boot with CONFIG_TRANSPARENT_HUGEPAGE_NEVER=y but later when > running apt. Here is the full dmesg output with CONFIG_DEBUG_VM, CONFIG_DEBUG_VM_IRQSOFF and CONFIG_DEBUG_VM_PGFLAGS enabled. Caputuring the backtrace after running up was not possible as the machine locked up completely. [ 0.000028] PROMLIB: Sun IEEE Boot Prom 'OBP 4.22.33 2007/06/18 12:45' [ 0.000050] PROMLIB: Root node compatible: [ 0.000121] Linux version 6.16.0+ (glaubitz@...e54) (sparc64-suse-linux-gcc (SUSE Linux) 11.3.0, GNU ld (GNU Binutils; SUSE Linux Enterprise 15) 2.43.1.20241209-150100.7.52) #36 SMP Sat Aug 9 06:19:23 UTC 2025 [ 0.000201] printk: legacy bootconsole [earlyprom0] enabled [ 0.418616] ARCH: SUN4U [ 0.447856] Ethernet address: 00:03:ba:15:17:4e [ 0.502076] MM: PAGE_OFFSET is 0xfff0000000000000 (max_phys_bits == 42) [ 0.581235] MM: VMALLOC [0x0000000100000000 --> 0x000c000000000000] [ 0.656203] MM: VMEMMAP [0x000c000000000000 --> 0x0018000000000000] [ 0.755106] Kernel: Using 6 locked TLB entries for main kernel image. [ 0.832144] Remapping the kernel... [ 0.832784] done. [ 1.069989] OF stdout device is: /pci@1e,600000/isa@...erial@0,3f8 [ 1.143962] PROM: Built device tree with 138544 bytes of memory. [ 1.219257] NODE_DATA(0) allocated [mem 0x23fe72340-0x23fe73dff] [ 1.368961] Allocated 24576 bytes for kernel page tables. [ 1.433729] Zone ranges: [ 1.464003] Normal [mem 0x0000000000000000-0x000000023fec9fff] [ 1.537931] Movable zone start for each node [ 1.588983] Early memory node ranges [ 1.631717] node 0: [mem 0x0000000000000000-0x000000003fffffff] [ 1.706687] node 0: [mem 0x0000000200000000-0x000000023effdfff] [ 1.781654] node 0: [mem 0x000000023f000000-0x000000023fd9ffff] [ 1.856620] node 0: [mem 0x000000023fdb0000-0x000000023fdc5fff] [ 1.931588] node 0: [mem 0x000000023fdca000-0x000000023fe99fff] [ 2.006556] node 0: [mem 0x000000023fea0000-0x000000023feaffff] [ 2.081524] node 0: [mem 0x000000023fec4000-0x000000023fec9fff] [ 2.156494] Initmem setup node 0 [mem 0x0000000000000000-0x000000023fec9fff] [ 2.241080] Initmem setup node 1 as memoryless [ 2.294511] Initmem setup node 2 as memoryless [ 2.347954] Initmem setup node 3 as memoryless [ 2.401400] Initmem setup node 4 as memoryless [ 2.454845] Initmem setup node 5 as memoryless [ 2.508289] Initmem setup node 6 as memoryless [ 2.561732] Initmem setup node 7 as memoryless [ 2.615175] Initmem setup node 8 as memoryless [ 2.668617] Initmem setup node 9 as memoryless [ 2.722063] Initmem setup node 10 as memoryless [ 2.776548] Initmem setup node 11 as memoryless [ 2.831030] Initmem setup node 12 as memoryless [ 2.885514] Initmem setup node 13 as memoryless [ 2.939999] Initmem setup node 14 as memoryless [ 2.994484] Initmem setup node 15 as memoryless [ 3.048968] Initmem setup node 16 as memoryless [ 3.103453] Initmem setup node 17 as memoryless [ 3.157935] Initmem setup node 18 as memoryless [ 3.212420] Initmem setup node 19 as memoryless [ 3.266905] Initmem setup node 20 as memoryless [ 3.321388] Initmem setup node 21 as memoryless [ 3.375871] Initmem setup node 22 as memoryless [ 3.430356] Initmem setup node 23 as memoryless [ 3.484838] Initmem setup node 24 as memoryless [ 3.539324] Initmem setup node 25 as memoryless [ 3.593810] Initmem setup node 26 as memoryless [ 3.648293] Initmem setup node 27 as memoryless [ 3.702778] Initmem setup node 28 as memoryless [ 3.757261] Initmem setup node 29 as memoryless [ 3.811744] Initmem setup node 30 as memoryless [ 3.866229] Initmem setup node 31 as memoryless [ 3.960015] On node 0, zone Normal: 1 pages in unavailable ranges [ 4.032976] On node 0, zone Normal: 8 pages in unavailable ranges [ 4.105874] On node 0, zone Normal: 2 pages in unavailable ranges [ 4.178749] On node 0, zone Normal: 3 pages in unavailable ranges [ 4.251637] On node 0, zone Normal: 10 pages in unavailable ranges [ 4.325587] On node 0, zone Normal: 155 pages in unavailable ranges [ 4.400532] Booting Linux... [ 4.434948] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32] [ 4.511993] CPU CAPS: [v8plus,vis,vis2] [ 4.564722] percpu: Embedded 14 pages/cpu s74968 r8192 d31528 u4194304 [ 4.643756] pcpu-alloc: s74968 r8192 d31528 u4194304 alloc=1*4194304 [ 4.643771] pcpu-alloc: [0] 0 [ 4.646285] Kernel command line: BOOT_IMAGE=/vmlinux-6.16.0+ root=UUID=a8314d10-9c39-438b-9dc4-9db2e05a6530 ro [ 4.766302] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinux-6.16.0+", will be passed to user space. [ 4.887097] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes [ 4.978119] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes, linear) [ 5.073189] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes, linear) [ 5.165908] Sorting __ex_table... [ 5.206168] Fallback order for Node 0: 0 [ 5.206180] Fallback order for Node 1: 0 [ 5.206187] Fallback order for Node 2: 0 [ 5.206192] Fallback order for Node 3: 0 [ 5.206198] Fallback order for Node 4: 0 [ 5.206203] Fallback order for Node 5: 0 [ 5.206209] Fallback order for Node 6: 0 [ 5.206214] Fallback order for Node 7: 0 [ 5.206220] Fallback order for Node 8: 0 [ 5.206225] Fallback order for Node 9: 0 [ 5.206231] Fallback order for Node 10: 0 [ 5.206237] Fallback order for Node 11: 0 [ 5.206243] Fallback order for Node 12: 0 [ 5.206248] Fallback order for Node 13: 0 [ 5.206254] Fallback order for Node 14: 0 [ 5.206259] Fallback order for Node 15: 0 [ 5.206265] Fallback order for Node 16: 0 [ 5.206271] Fallback order for Node 17: 0 [ 5.206277] Fallback order for Node 18: 0 [ 5.206282] Fallback order for Node 19: 0 [ 5.206288] Fallback order for Node 20: 0 [ 5.206293] Fallback order for Node 21: 0 [ 5.206299] Fallback order for Node 22: 0 [ 5.206304] Fallback order for Node 23: 0 [ 5.206310] Fallback order for Node 24: 0 [ 5.206315] Fallback order for Node 25: 0 [ 5.206321] Fallback order for Node 26: 0 [ 5.206326] Fallback order for Node 27: 0 [ 5.206332] Fallback order for Node 28: 0 [ 5.206338] Fallback order for Node 29: 0 [ 5.206343] Fallback order for Node 30: 0 [ 5.206348] Fallback order for Node 31: 0 [ 5.206357] Built 1 zonelists, mobility grouping on. Total pages: 261965 [ 6.844310] Policy zone: Normal [ 6.881848] mem auto-init: stack:off, heap alloc:off, heap free:off [ 7.009331] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=32 [ 7.089245] rcu: Hierarchical RCU implementation. [ 7.145533] rcu: RCU event tracing is enabled. [ 7.199704] rcu: RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=1. [ 7.280912] Tracing variant of Tasks RCU enabled. [ 7.338203] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 7.428765] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 7.508955] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. [ 7.625622] NR_IRQS: 2048, nr_irqs: 2048, preallocated irqs: 1 [ 7.695587] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 7.777833] clocksource: stick: mask: 0xffffffffffffffff max_cycles: 0x2c47f4ee7, max_idle_ns: 440795202497 ns [ 7.897497] clocksource: mult[53555555] shift[24] [ 7.953748] clockevent: mult[3126e98] shift[32] [ 8.008060] Console: colour dummy device 80x25 [ 8.061290] printk: legacy console [tty0] enabled [ 8.117620] printk: legacy bootconsole [earlyprom0] disabled [ 8.335327] Calibrating delay using timer specific routine.. 24.00 BogoMIPS (lpj=120039) [ 8.335348] pid_max: default: 32768 minimum: 301 [ 8.335566] Mount-cache hash table entries: 4096 (order: 2, 32768 bytes, linear) [ 8.335605] Mountpoint-cache hash table entries: 4096 (order: 2, 32768 bytes, linear) [ 8.337722] rcu: Hierarchical SRCU implementation. [ 8.337743] rcu: Max phase no-delay instances is 1000. [ 8.338177] smp: Bringing up secondary CPUs ... [ 8.338199] smp: Brought up 1 node, 1 CPU [ 8.338434] Memory: 2022448K/2095720K available (8391K kernel code, 8021K rwdata, 2168K rodata, 472K init, 1938K bss, 68552K reserved, 0K cma-reserved) [ 8.338861] devtmpfs: initialized [ 8.341519] Performance events: [ 8.341529] Testing NMI watchdog ... [ 8.541542] OK. [ 8.541580] Supported PMU type is 'ultra3i' [ 8.541914] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 8.541978] posixtimers hash table entries: 512 (order: 0, 8192 bytes, linear) [ 8.542061] futex hash table entries: 8 (512 bytes on 32 NUMA nodes, total 16 KiB, linear). [ 8.542730] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 8.543663] IRQ pre handler NOT supported. [ 8.543695] IRQ pre handler NOT supported. [ 8.543713] IRQ pre handler NOT supported. [ 8.543730] IRQ pre handler NOT supported. [ 8.543746] IRQ pre handler NOT supported. [ 8.543827] IRQ pre handler NOT supported. [ 8.543906] IRQ pre handler NOT supported. [ 8.543983] IRQ pre handler NOT supported. [ 8.544001] IRQ pre handler NOT supported. [ 8.544018] IRQ pre handler NOT supported. [ 8.544034] IRQ pre handler NOT supported. [ 8.544050] IRQ pre handler NOT supported. [ 8.544269] IRQ pre handler NOT supported. [ 8.545176] IRQ pre handler NOT supported. [ 8.545289] IRQ pre handler NOT supported. [ 8.545355] IRQ pre handler NOT supported. [ 8.545485] IRQ pre handler NOT supported. [ 8.545626] IRQ pre handler NOT supported. [ 8.545741] IRQ pre handler NOT supported. [ 8.545877] IRQ pre handler NOT supported. [ 8.546041] IRQ pre handler NOT supported. [ 8.546062] IRQ pre handler NOT supported. [ 8.546080] IRQ pre handler NOT supported. [ 8.546097] IRQ pre handler NOT supported. [ 8.546114] IRQ pre handler NOT supported. [ 8.546212] IRQ pre handler NOT supported. [ 8.546378] IRQ pre handler NOT supported. [ 8.546551] IRQ pre handler NOT supported. [ 8.546571] IRQ pre handler NOT supported. [ 8.546589] IRQ pre handler NOT supported. [ 8.546613] IRQ pre handler NOT supported. [ 8.546640] IRQ pre handler NOT supported. [ 8.546719] IRQ pre handler NOT supported. [ 8.546815] IRQ pre handler NOT supported. [ 8.548337] pci@1f,700000: TOMATILLO PCI Bus Module ver[4:0] [ 8.548363] pci@1f,700000: PCI IO [io 0x7f601000000-0x7f601ffffff] offset 7f601000000 [ 8.548384] pci@1f,700000: PCI MEM [mem 0x7f700000000-0x7f7ffffffff] offset 7f700000000 [ 8.549720] PCI: Scanning PBM /pci@1f,700000 [ 8.549964] schizo f0068950: PCI host bridge to bus 0000:00 [ 8.549986] pci_bus 0000:00: Unknown NUMA node; performance will be reduced [ 8.550007] pci_bus 0000:00: root bus resource [io 0x7f601000000-0x7f601ffffff] (bus address [0x0000-0xffffff]) [ 8.550030] pci_bus 0000:00: root bus resource [mem 0x7f700000000-0x7f7ffffffff] (bus address [0x00000000-0xffffffff]) [ 8.550052] pci_bus 0000:00: root bus resource [bus 00] [ 8.550105] pci 0000:00:02.0: [14e4:1648] type 00 class 0x020000 [ 8.550122] pci 0000:00:02.0: reg 0x10: [mem 0x7f700200000-0x7f7003fffff 64bit] [ 8.550142] pci 0000:00:02.0: reg 0x18: [mem 0x7f700000000-0x7f70000ffff 64bit] [ 8.550206] pci 0000:00:02.0: PME# supported from D3hot [ 8.550357] pci 0000:00:02.1: [14e4:1648] type 00 class 0x020000 [ 8.550376] pci 0000:00:02.1: reg 0x10: [mem 0x7f700400000-0x7f7005fffff 64bit] [ 8.550395] pci 0000:00:02.1: reg 0x18: [mem 0x7f700000000-0x7f70000ffff 64bit] [ 8.550442] pci 0000:00:02.1: PME# supported from D3hot [ 8.550570] pci 0000:00:02.1: BAR 2 [mem 0x7f700000000-0x7f70000ffff 64bit]: can't claim; address conflict with 0000:00:02.0 [mem 0x7f700000000-0x7f70000ffff 64bit] [ 8.550774] pci@1e,600000: TOMATILLO PCI Bus Module ver[4:0] [ 8.550793] pci@1e,600000: PCI IO [io 0x7fe01000000-0x7fe01ffffff] offset 7fe01000000 [ 8.550811] pci@1e,600000: PCI MEM [mem 0x7ff00000000-0x7ffffffffff] offset 7ff00000000 [ 8.552155] PCI: Scanning PBM /pci@1e,600000 [ 8.552712] schizo f0071294: PCI host bridge to bus 0001:00 [ 8.552731] pci_bus 0001:00: Unknown NUMA node; performance will be reduced [ 8.552751] pci_bus 0001:00: root bus resource [io 0x7fe01000000-0x7fe01ffffff] (bus address [0x0000-0xffffff]) [ 8.552774] pci_bus 0001:00: root bus resource [mem 0x7ff00000000-0x7ffffffffff] (bus address [0x00000000-0xffffffff]) [ 8.552796] pci_bus 0001:00: root bus resource [bus 00] [ 8.552845] pci 0001:00:07.0: [10b9:1533] type 00 class 0x060100 [ 8.552863] pci 0001:00:07.0: reg 0x10: [io 0x7fe01000000-0x7fe0100ffff] [ 8.552879] pci 0001:00:07.0: reg 0x14: [mem 0x7ff00000000-0x7ff000fffff] [ 8.552895] pci 0001:00:07.0: reg 0x18: [mem 0x7ff00000000-0x7ff000fffff] [ 8.553081] pci 0001:00:06.0: [10b9:7101] type 00 class 0x000000 [ 8.553100] pci 0001:00:06.0: reg 0x10: [io 0x7fe01000000-0x7fe0100000f] [ 8.553128] pci 0001:00:06.0: quirk: [io 0x7fe01000800-0x7fe0100083f] claimed by ali7101 ACPI [ 8.553149] pci 0001:00:06.0: quirk: [io 0x7fe01000600-0x7fe0100061f] claimed by ali7101 SMB [ 8.553277] pci 0001:00:0a.0: [10b9:5237] type 00 class 0x0c0310 [ 8.553295] pci 0001:00:0a.0: reg 0x10: [mem 0x7ff01000000-0x7ff01ffffff] [ 8.553331] pci 0001:00:0a.0: PME# supported from D3cold [ 8.553466] pci 0001:00:0d.0: [10b9:5229] type 00 class 0x0101ff [ 8.553484] pci 0001:00:0d.0: reg 0x10: [io 0x7fe01000900-0x7fe01000907] [ 8.553501] pci 0001:00:0d.0: reg 0x14: [io 0x7fe01000918-0x7fe0100091f] [ 8.553517] pci 0001:00:0d.0: reg 0x18: [io 0x7fe01000910-0x7fe01000917] [ 8.553532] pci 0001:00:0d.0: reg 0x1c: [io 0x7fe01000908-0x7fe0100090f] [ 8.553547] pci 0001:00:0d.0: reg 0x20: [io 0x7fe01000920-0x7fe0100092f] [ 8.553671] pci 0001:00:07.0: BAR 0 [io 0x7fe01000000-0x7fe0100ffff]: can't claim; address conflict with 0001:00:06.0 [io 0x7fe01000600-0x7fe0100061f] [ 8.553699] pci 0001:00:07.0: BAR 2 [mem 0x7ff00000000-0x7ff000fffff]: can't claim; address conflict with 0001:00:07.0 [mem 0x7ff00000000-0x7ff000fffff] [ 8.553939] pci@1c,600000: TOMATILLO PCI Bus Module ver[4:0] [ 8.553959] pci@1c,600000: PCI IO [io 0x7ce01000000-0x7ce01ffffff] offset 7ce01000000 [ 8.553976] pci@1c,600000: PCI MEM [mem 0x7cf00000000-0x7cfffffffff] offset 7cf00000000 [ 8.555350] PCI: Scanning PBM /pci@1c,600000 [ 8.555726] schizo f00798e4: PCI host bridge to bus 0002:00 [ 8.555749] pci_bus 0002:00: Unknown NUMA node; performance will be reduced [ 8.555769] pci_bus 0002:00: root bus resource [io 0x7ce01000000-0x7ce01ffffff] (bus address [0x0000-0xffffff]) [ 8.555793] pci_bus 0002:00: root bus resource [mem 0x7cf00000000-0x7cfffffffff] (bus address [0x00000000-0xffffffff]) [ 8.555814] pci_bus 0002:00: root bus resource [bus 00] [ 8.555879] pci 0002:00:02.0: [1000:0021] type 00 class 0x010000 [ 8.555897] pci 0002:00:02.0: reg 0x10: [io 0x7ce01000900-0x7ce010009ff] [ 8.555913] pci 0002:00:02.0: reg 0x14: [mem 0x7cf00100000-0x7cf00101fff 64bit] [ 8.555931] pci 0002:00:02.0: reg 0x1c: [mem 0x7cf00102000-0x7cf00103fff 64bit] [ 8.555977] pci 0002:00:02.0: supports D1 D2 [ 8.556122] pci 0002:00:02.1: [1000:0021] type 00 class 0x010000 [ 8.556141] pci 0002:00:02.1: reg 0x10: [io 0x7ce01000a00-0x7ce01000aff] [ 8.556157] pci 0002:00:02.1: reg 0x14: [mem 0x7cf00104000-0x7cf00105fff 64bit] [ 8.556175] pci 0002:00:02.1: reg 0x1c: [mem 0x7cf00106000-0x7cf00107fff 64bit] [ 8.556212] pci 0002:00:02.1: supports D1 D2 [ 8.556525] pci@1d,700000: TOMATILLO PCI Bus Module ver[4:0] [ 8.556545] pci@1d,700000: PCI IO [io 0x7c601000000-0x7c601ffffff] offset 7c601000000 [ 8.556563] pci@1d,700000: PCI MEM [mem 0x7c700000000-0x7c7ffffffff] offset 7c700000000 [ 8.557937] PCI: Scanning PBM /pci@1d,700000 [ 8.558160] schizo f0081e80: PCI host bridge to bus 0003:00 [ 8.558181] pci_bus 0003:00: Unknown NUMA node; performance will be reduced [ 8.558201] pci_bus 0003:00: root bus resource [io 0x7c601000000-0x7c601ffffff] (bus address [0x0000-0xffffff]) [ 8.558223] pci_bus 0003:00: root bus resource [mem 0x7c700000000-0x7c7ffffffff] (bus address [0x00000000-0xffffffff]) [ 8.558245] pci_bus 0003:00: root bus resource [bus 00] [ 8.558316] pci 0003:00:02.0: [14e4:1648] type 00 class 0x020000 [ 8.558334] pci 0003:00:02.0: reg 0x10: [mem 0x7c700200000-0x7c7003fffff 64bit] [ 8.558353] pci 0003:00:02.0: reg 0x18: [mem 0x7c700000000-0x7c70000ffff 64bit] [ 8.558410] pci 0003:00:02.0: PME# supported from D3hot [ 8.558566] pci 0003:00:02.1: [14e4:1648] type 00 class 0x020000 [ 8.558585] pci 0003:00:02.1: reg 0x10: [mem 0x7c700400000-0x7c7005fffff 64bit] [ 8.558604] pci 0003:00:02.1: reg 0x18: [mem 0x7c700000000-0x7c70000ffff 64bit] [ 8.558651] pci 0003:00:02.1: PME# supported from D3hot [ 8.558779] pci 0003:00:02.1: BAR 2 [mem 0x7c700000000-0x7c70000ffff 64bit]: can't claim; address conflict with 0003:00:02.0 [mem 0x7c700000000-0x7c70000ffff 64bit] [ 8.570029] HugeTLB: allocation took 0ms with hugepage_allocation_threads=1 [ 8.570056] HugeTLB: allocation took 0ms with hugepage_allocation_threads=1 [ 8.570076] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 8.570090] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 8.570103] HugeTLB: registered 8.00 MiB page size, pre-allocated 0 pages [ 8.570116] HugeTLB: 0 KiB vmemmap can be freed for a 8.00 MiB page [ 8.570129] HugeTLB: registered 256 MiB page size, pre-allocated 0 pages [ 8.570141] HugeTLB: 0 KiB vmemmap can be freed for a 256 MiB page [ 8.570155] HugeTLB: registered 2.00 GiB page size, pre-allocated 0 pages [ 8.570167] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 GiB page [ 8.587788] SCSI subsystem initialized [ 8.587928] libata version 3.00 loaded. [ 8.588013] usbcore: registered new interface driver usbfs [ 8.588066] usbcore: registered new interface driver hub [ 8.588101] usbcore: registered new device driver usb [ 8.588167] pps_core: LinuxPPS API ver. 1 registered [ 8.588180] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@...ux.it> [ 8.588205] PTP clock support registered [ 8.588879] vgaarb: loaded [ 8.589063] /pci@1e,600000/isa@...tc@0,70: RTC regs at 0x7fe01000070 [ 8.589831] clocksource: Switched to clocksource stick [ 8.693105] NET: Registered PF_INET protocol family [ 8.693447] IP idents hash table entries: 32768 (order: 5, 262144 bytes, linear) [ 8.695838] tcp_listen_portaddr_hash hash table entries: 1024 (order: 1, 16384 bytes, linear) [ 8.695906] Table-perturb hash table entries: 65536 (order: 5, 262144 bytes, linear) [ 8.695937] TCP established hash table entries: 16384 (order: 4, 131072 bytes, linear) [ 8.696219] TCP bind hash table entries: 16384 (order: 6, 524288 bytes, linear) [ 8.697521] TCP: Hash tables configured (established 16384 bind 16384) [ 8.697690] UDP hash table entries: 1024 (order: 3, 65536 bytes, linear) [ 8.697860] UDP-Lite hash table entries: 1024 (order: 3, 65536 bytes, linear) [ 8.698208] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 8.698334] pci 0001:00:0a.0: enabling device (0000 -> 0002) [ 8.698403] PCI: CLS 64 bytes, default 64 [ 8.698583] Unpacking initramfs... [ 8.700064] power: Control reg at 7fe01000800 [ 8.700466] chmc: UltraSPARC-IIIi memory controller at /memory-controller@0,0 [ 8.701174] workingset: timestamp_bits=41 max_order=18 bucket_order=0 [ 8.850311] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 8.850359] io scheduler mq-deadline registered [ 8.850372] io scheduler kyber registered [ 8.851946] f00a71fc: ttyS0 at MMIO 0x7fe010003f8 (irq = 15, base_baud = 115387) is a 16550A [ 8.851981] Console: ttyS0 (SU) [ 8.852015] printk: legacy console [ttyS0] enabled [ 29.948586] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [ 29.948592] rcu: (detected by 0, t=2109 jiffies, g=-1151, q=3 ncpus=1) [ 29.948598] rcu: All QSes seen, last rcu_sched kthread activity 2109 (4294939474-4294937365), jiffies_till_next_fqs=1, root ->qsmask 0x0 [ 29.948607] rcu: rcu_sched kthread starved for 2109 jiffies! g-1151 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 [ 29.948615] rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior. [ 29.948618] rcu: RCU grace-period kthread stack dump: [ 29.948621] task:rcu_sched state:R running task stack:0 pid:15 tgid:15 ppid:2 task_flags:0x208040 flags:0x07000000 [ 29.948637] Call Trace: [ 29.948640] [<0000000000c2bdf4>] schedule+0x14/0x160 [ 29.948654] [<0000000000c32d54>] schedule_timeout+0x54/0xe0 [ 29.948665] [<00000000004fe240>] rcu_gp_fqs_loop+0x140/0x6c0 [ 29.948678] [<000000000050253c>] rcu_gp_kthread+0x23c/0x2a0 [ 29.948686] [<000000000049dc88>] kthread+0xe8/0x120 [ 29.948696] [<00000000004060c8>] ret_from_fork+0x1c/0x2c [ 29.948709] [<0000000000000000>] 0x0 [ 29.948714] rcu: Stack dump where RCU GP kthread last ran: [ 29.948718] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0+ #36 VOLUNTARY [ 29.948727] TSTATE: 0000004411001603 TPC: 00000000004dd900 TNPC: 00000000004dd904 Y: 00001702 Not tainted [ 29.948733] TPC: <console_flush_all+0x360/0x4c0> [ 29.948747] g0: 00000000004dd900 g1: 0000000000000000 g2: 0000000000000000 g3: 0000000001821000 [ 29.948752] g4: fff0000000180000 g5: fff000023d170000 g6: fff0000000158000 g7: 000000000000000e [ 29.948757] o0: 00000000018211e0 o1: 0000000000000000 o2: 0000000000000000 o3: 00000000018205d0 [ 29.948761] o4: 0000000000000000 o5: 00000000018817e8 sp: fff000000015a901 ret_pc: 00000000004dd8f0 [ 29.948766] RPC: <console_flush_all+0x350/0x4c0> [ 29.948773] l0: 00000000018205d0 l1: 0000000000000000 l2: 0000000000000000 l3: 000000000145f538 [ 29.948778] l4: 0000000000000000 l5: 0000000000000001 l6: 00000000015e60b0 l7: 000000000155a308 [ 29.948783] i0: 0000000000000000 i1: fff000000015b2b8 i2: fff000000015b2b3 i3: 0000000000000000 [ 29.948787] i4: 00000000018211e0 i5: 0000000000000001 i6: fff000000015aa01 i7: 00000000004ddae8 [ 29.948792] I7: <console_unlock+0x88/0x120> [ 29.948800] Call Trace: [ 29.948802] [<00000000004ddae8>] console_unlock+0x88/0x120 [ 29.948810] [<00000000004de628>] vprintk_emit+0x1e8/0x280 [ 29.948818] [<000000000042a3a0>] _printk+0x20/0x30 [ 29.948828] [<00000000004deb6c>] register_console+0x34c/0x580 [ 29.948837] [<00000000009416f8>] serial_core_register_port+0x898/0x8c0 [ 29.948849] [<00000000009468fc>] su_probe+0x15c/0x3e0 [ 29.948856] [<00000000009581e8>] platform_probe+0x28/0x80 [ 29.948868] [<0000000000955798>] really_probe+0xb8/0x340 [ 29.948874] [<0000000000955bc4>] driver_probe_device+0x24/0x120 [ 29.948881] [<0000000000955e6c>] __driver_attach+0x8c/0x1a0 [ 29.948888] [<000000000095378c>] bus_for_each_dev+0x4c/0xa0 [ 29.948894] [<0000000000954ac8>] bus_add_driver+0x148/0x220 [ 29.948901] [<0000000000956a94>] driver_register+0x74/0x120 [ 29.948908] [<000000000165a150>] sunsu_init+0x180/0x1dc [ 29.948917] [<00000000004367b0>] do_one_initcall+0x30/0x240 [ 29.948926] [<0000000001631014>] kernel_init_freeable+0x244/0x2b8 [ 36.081726] Freeing initrd memory: 10872K [ 36.135456] f00a8d7c: ttyS1 at MMIO 0x7fe010002e8 (irq = 15, base_baud = 115387) is a 16550A [ 36.247159] pata_ali 0001:00:0d.0: enabling device (0004 -> 0005) [ 36.328511] scsi host0: pata_ali [ 36.371269] scsi host1: pata_ali [ 36.413710] ata1: PATA max UDMA/100 cmd 0x7fe01000900 ctl 0x7fe01000918 bmdma 0x7fe01000920 irq 18 lpm-pol 0 [ 36.542953] ata2: PATA max UDMA/100 cmd 0x7fe01000910 ctl 0x7fe01000908 bmdma 0x7fe01000928 irq 18 lpm-pol 0 [ 36.672814] ohci-pci 0001:00:0a.0: OHCI PCI host controller [ 36.746038] ohci-pci 0001:00:0a.0: new USB bus registered, assigned bus number 1 [ 36.843611] ohci-pci 0001:00:0a.0: irq 17, io mem 0x7ff01000000 [ 36.921786] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L532U, SI02, max UDMA/33 [ 37.008775] ata1.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 37.118566] ata1.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 37.231885] hub 1-0:1.0: USB hub found [ 37.281304] hub 1-0:1.0: 2 ports detected [ 37.335395] rtc_cmos rtc_cmos: error -ENXIO: IRQ index 0 not found [ 37.417064] rtc_cmos rtc_cmos: registered as rtc0 [ 37.479161] rtc_cmos rtc_cmos: setting system clock to 2025-08-09T06:59:27 UTC (1754722767) [ 37.589355] rtc_cmos rtc_cmos: no alarms, 114 bytes nvram [ 37.660523] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L532U SI02 PQ: 0 ANSI: 5 [ 37.768080] usbcore: registered new interface driver usbhid [ 37.841333] usbhid: USB HID core driver [ 37.892166] NET: Registered PF_INET6 protocol family [ 37.957397] usb 1-1: new low-speed USB device number 2 using ohci-pci [ 38.043046] Segment Routing with IPv6 [ 38.091327] In-situ OAM (IOAM) with IPv6 [ 38.142939] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 38.221312] NET: Registered PF_PACKET protocol family [ 38.299490] Demotion targets for Node 0: null [ 38.434147] input: Dell Dell QuietKey Keyboard as /devices/root/f0071294/pci0001:00/0001:00:0a.0/usb1/1-1/1-1:1.0/0003:413C:2106.0001/input/input0 [ 38.607481] This architecture does not have kernel memory protection. [ 38.692231] Run /init as init process [ 38.740289] with arguments: [ 38.740294] /init [ 38.740298] with environment: [ 38.740302] HOME=/ [ 38.740306] TERM=linux [ 38.740310] BOOT_IMAGE=/vmlinux-6.16.0+ [ 38.749973] hid-generic 0003:413C:2106.0001: input: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0001:00:0a.0-1/input0 [ 39.466208] tg3 0000:00:02.0: enabling device (0000 -> 0002) [ 39.713238] sym53c8xx 0002:00:02.0: enabling device (0146 -> 0147) [ 39.938727] sym0: <1010-66> rev 0x1 at pci 0002:00:02.0 irq 24 [ 40.025921] sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking [ 40.144456] sym0: SCSI BUS has been reset. [ 40.198277] scsi host2: sym-2.2.3 [ 40.241845] tg3 0000:00:02.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [ 40.461860] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 40.566055] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 40.634772] tg3 0000:00:02.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [ 40.805443] tg3 0000:00:02.0 eth0: Tigon3 [partno(none) rev 2100] (PCI:66MHz:64-bit) MAC address 00:03:ba:15:17:4e [ 40.941647] tg3 0000:00:02.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 41.069812] tg3 0000:00:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 41.172840] tg3 0000:00:02.0 eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 41.261810] tg3 0000:00:02.1: enabling device (0000 -> 0002) [ 41.336305] tg3 0000:00:02.1: BAR 2: can't reserve [mem size 0x00010000 64bit] [ 41.431350] tg3 0000:00:02.1: Cannot obtain PCI resources, aborting [ 41.513806] tg3 0000:00:02.1: probe with driver tg3 failed with error -16 [ 41.603169] tg3 0003:00:02.0: enabling device (0000 -> 0002) [ 41.709976] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 41.829722] tg3 0003:00:02.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [ 42.129720] tg3 0003:00:02.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [ 42.300455] tg3 0003:00:02.0 eth1: Tigon3 [partno(none) rev 2100] (PCI:66MHz:64-bit) MAC address 00:03:ba:15:17:50 [ 42.436627] tg3 0003:00:02.0 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 42.564810] tg3 0003:00:02.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 42.667830] tg3 0003:00:02.0 eth1: dma_rwctrl[763f0000] dma_mask[64-bit] [ 42.756452] tg3 0003:00:02.1: enabling device (0000 -> 0002) [ 42.830943] tg3 0003:00:02.1: BAR 2: can't reserve [mem size 0x00010000 64bit] [ 42.925914] tg3 0003:00:02.1: Cannot obtain PCI resources, aborting [ 43.008384] tg3 0003:00:02.1: probe with driver tg3 failed with error -16 [ 43.107054] tg3 0003:00:02.0 enP3p0s2f0: renamed from eth1 [ 43.187131] tg3 0000:00:02.0 enp0s2f0: renamed from eth0 [ 43.731423] scsi 2:0:0:0: Direct-Access HITACHI HUS15143BSUN146G PA04 PQ: 0 ANSI: 3 [ 43.837936] scsi target2:0:0: tagged command queuing enabled, command queue depth 16. [ 43.959710] scsi target2:0:0: Beginning Domain Validation [ 44.038800] scsi target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) [ 44.143551] scsi 2:0:0:0: Power-on or device reset occurred [ 44.225556] scsi target2:0:0: Ending Domain Validation [ 44.297767] scsi 2:0:1:0: Direct-Access FUJITSU MAX3147NCSUN146G 1503 PQ: 0 ANSI: 4 [ 44.404246] sd 2:0:0:0: [sda] 286739329 512-byte logical blocks: (147 GB/137 GiB) [ 44.502640] scsi target2:0:1: tagged command queuing enabled, command queue depth 16. [ 44.607368] sd 2:0:0:0: [sda] Write Protect is off [ 44.670341] sd 2:0:0:0: [sda] Mode Sense: e3 00 10 08 [ 44.670365] scsi target2:0:1: Beginning Domain Validation [ 44.745399] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 44.861450] scsi target2:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) [ 44.967471] scsi 2:0:1:0: Power-on or device reset occurred [ 45.087828] sda: sda1 sda2 sda3 sda4 [ 45.141451] sd 2:0:0:0: [sda] Attached SCSI disk [ 45.204383] scsi target2:0:1: Ending Domain Validation [ 45.854271] sd 2:0:1:0: [sdb] 286739329 512-byte logical blocks: (147 GB/137 GiB) [ 46.444081] sd 2:0:1:0: [sdb] Write Protect is off [ 46.506999] sd 2:0:1:0: [sdb] Mode Sense: c7 00 00 08 [ 47.623729] sd 2:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 49.098634] sym53c8xx 0002:00:02.1: enabling device (0146 -> 0147) [ 49.180576] sym1: <1010-66> rev 0x1 at pci 0002:00:02.1 irq 25 [ 49.260335] sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking [ 49.378843] sym1: SCSI BUS has been reset. [ 49.432604] scsi host3: sym-2.2.3 [ 49.494560] sdb: sdb1 [ 49.526080] sd 2:0:1:0: [sdb] Attached SCSI disk [ 57.944587] EXT4-fs (sda2): mounted filesystem a8314d10-9c39-438b-9dc4-9db2e05a6530 ro with ordered data mode. Quota mode: disabled. [ 59.548859] systemd[1]: Failed to find module 'autofs4' [ 59.739711] systemd[1]: systemd 257.7-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK -SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE) [ 60.181448] systemd[1]: Detected architecture sparc64. [ 60.401210] systemd[1]: Hostname set to <raverin>. [ 61.662210] systemd-sysv-generator[140]: SysV service '/etc/init.d/buildd' lacks a native systemd unit file, automatically generating a unit file for compatibility. [ 61.855664] systemd-sysv-generator[140]: Please update package to include a native systemd unit file. [ 61.977034] systemd-sysv-generator[140]: ⚠️ This compatibility logic is deprecated, expect removal soon. ⚠️ [ 63.339369] systemd[1]: Queued start job for default target graphical.target. [ 63.500708] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 63.712026] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 63.931887] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 64.181824] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 64.431259] systemd[1]: Created slice user.slice - User and Session Slice. [ 64.619959] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 64.879850] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 65.129871] systemd[1]: Starting of proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point unsupported. [ 65.429785] systemd[1]: Expecting device dev-disk-by\x2duuid-2b14ad4b\x2d10c7\x2d4337\x2da4bd\x2d38cb86a8e79b.device - /dev/disk/by-uuid/2b14ad4b-10c7-4337-a4bd-38cb86a8e79b... [ 65.749684] systemd[1]: Expecting device dev-disk-by\x2duuid-e4125eef\x2d3d62\x2d4226\x2d8d9a\x2d9838b6d2c426.device - /dev/disk/by-uuid/e4125eef-3d62-4226-8d9a-9838b6d2c426... [ 66.069682] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0... [ 66.239724] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 66.439752] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 66.669765] systemd[1]: Reached target paths.target - Path Units. [ 66.849722] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 67.039734] systemd[1]: Reached target slices.target - Slice Units. [ 67.219807] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 67.440141] systemd[1]: Listening on syslog.socket - Syslog Socket. [ 67.630027] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption. [ 67.860026] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 68.089958] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 68.320053] systemd[1]: Listening on systemd-journald.socket - Journal Sockets. [ 68.530037] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 68.749899] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 68.980819] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 69.190098] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 69.450117] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock... [ 69.710169] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 69.970187] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 70.230328] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 70.530332] systemd[1]: Starting modprobe@...figfs.service - Load Kernel Module configfs... [ 70.820323] systemd[1]: Starting modprobe@....service - Load Kernel Module drm... [ 71.080361] systemd[1]: Starting modprobe@..._pstore.service - Load Kernel Module efi_pstore... [ 71.370306] systemd[1]: Starting modprobe@...e.service - Load Kernel Module fuse... [ 71.620104] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 71.833050] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 72.118962] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 72.288335] systemd[1]: systemd-journald.service: (This warning is only shown for the first unit using IP firewalling.) [ 72.441273] systemd[1]: Starting systemd-journald.service - Journal Service... [ 72.684614] systemd-journald[154]: Collecting audit messages is disabled. [ 72.810526] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 73.200343] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 73.446942] EXT4-fs (sda2): re-mounted a8314d10-9c39-438b-9dc4-9db2e05a6530 r/w. [ 73.590318] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials... [ 73.890315] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 74.240333] systemd[1]: Started systemd-journald.service - Journal Service. [ 76.472443] systemd-journald[154]: Received client request to flush runtime journal. [ 78.349606] random: crng init done [ 79.504029] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 80.133697] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 80.275546] sd 2:0:1:0: Attached scsi generic sg2 type 0 [ 81.376870] Adding 1000096k swap on /dev/sda4. Priority:-2 extents:1 across:1000096k [ 83.194980] tg3 0000:00:02.0: Direct firmware load for tigon/tg3_tso.bin failed with error -2 [ 83.329895] tg3 0000:00:02.0 enp0s2f0: Failed to load firmware "tigon/tg3_tso.bin" [ 83.429513] tg3 0000:00:02.0 enp0s2f0: TSO capability disabled [ 84.815494] tg3 0000:00:02.0 enp0s2f0: No firmware running [ 90.434186] tg3 0000:00:02.0 enp0s2f0: Link is up at 1000 Mbps, full duplex [ 90.525821] tg3 0000:00:02.0 enp0s2f0: Flow control is off for TX and off for RX [ 113.710728] systemd-journald[154]: Time jumped backwards, rotating. Let me know if you have more suggestions to test. I can also provide you with full access to this Netra 240 if you send me your public SSH key in a private mail. Adrian -- .''`. John Paul Adrian Glaubitz : :' : Debian Developer `. `' Physicist `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Powered by blists - more mailing lists