| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250811-clk-for-stephen-round-rate-v1-38-b3bf97b038dc@redhat.com>
Date: Mon, 11 Aug 2025 11:18:30 -0400
From: Brian Masney via B4 Relay <devnull+bmasney.redhat.com@...nel.org>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Sudeep Holla <sudeep.holla@....com>,
Cristian Marussi <cristian.marussi@....com>,
Chen Wang <unicorn_wang@...look.com>, Inochi Amaoto <inochiama@...il.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Paul Cercueil <paul@...pouillou.net>,
Keguang Zhang <keguang.zhang@...il.com>,
Taichi Sugaya <sugaya.taichi@...ionext.com>,
Takao Orito <orito.takao@...ionext.com>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Jacky Huang <ychuang3@...oton.com>,
Shan-Chun Hung <schung@...oton.com>, Vladimir Zapolskiy <vz@...ia.com>,
Piotr Wojtaszczyk <piotr.wojtaszczyk@...esys.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Samuel Holland <samuel.holland@...ive.com>, Yixun Lan <dlan@...too.org>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Daniel Machon <daniel.machon@...rochip.com>, UNGLinuxDriver@...rochip.com,
Orson Zhai <orsonzhai@...il.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>,
Chunyan Zhang <zhang.lyra@...il.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Michal Simek <michal.simek@....com>, Maxime Ripard <mripard@...nel.org>,
Andreas Färber <afaerber@...e.de>,
Manivannan Sadhasivam <mani@...nel.org>, Sven Peter <sven@...nel.org>,
Janne Grunau <j@...nau.net>, Alyssa Rosenzweig <alyssa@...enzweig.io>,
Neal Gompa <neal@...pa.dev>, Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>,
Ray Jui <rjui@...adcom.com>, Scott Branden <sbranden@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Max Filippov <jcmvbkbc@...il.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Daniel Palmer <daniel@...ngy.jp>, Romain Perier <romain.perier@...il.com>,
Andrew Lunn <andrew@...n.ch>, Gregory Clement <gregory.clement@...tlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Bjorn Andersson <andersson@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Heiko Stuebner <heiko@...ech.de>,
Andrea della Porta <andrea.porta@...e.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>, Alim Akhtar <alim.akhtar@...sung.com>,
Qin Jian <qinjian@...lus1.com>, Viresh Kumar <vireshk@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Alex Helms <alexander.helms.jy@...esas.com>,
Linus Walleij <linus.walleij@...aro.org>, Liviu Dudau <liviu.dudau@....com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@...hiba.co.jp>
Cc: linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
arm-scmi@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
sophgo@...ts.linux.dev, linux-mips@...r.kernel.org, imx@...ts.linux.dev,
linux-riscv@...ts.infradead.org, spacemit@...ts.linux.dev,
linux-stm32@...md-mailman.stormreply.com, patches@...nsource.cirrus.com,
linux-actions@...ts.infradead.org, asahi@...ts.linux.dev,
linux-mediatek@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, soc@...ts.linux.dev,
Brian Masney <bmasney@...hat.com>
Subject: [PATCH 038/114] clk: nxp: lpc32xx: convert from round_rate() to
determine_rate()
From: Brian Masney <bmasney@...hat.com>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Note that the changes involving LPC32XX_DEFINE_PLL_OPS were done
by hand.
Signed-off-by: Brian Masney <bmasney@...hat.com>
---
drivers/clk/nxp/clk-lpc32xx.c | 59 ++++++++++++++++++++++++-------------------
1 file changed, 33 insertions(+), 26 deletions(-)
diff --git a/drivers/clk/nxp/clk-lpc32xx.c b/drivers/clk/nxp/clk-lpc32xx.c
index e00f270bc6aa813b395d9fddb15c6bcb2ded0936..9df8183cf24972fda3aea30166c628880af7f474 100644
--- a/drivers/clk/nxp/clk-lpc32xx.c
+++ b/drivers/clk/nxp/clk-lpc32xx.c
@@ -579,17 +579,17 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
return regmap_update_bits(clk_regmap, clk->reg, 0x1FFFF, val);
}
-static long clk_hclk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
+static int clk_hclk_pll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct lpc32xx_pll_clk *clk = to_lpc32xx_pll_clk(hw);
- u64 m_i, o = rate, i = *parent_rate, d = (u64)rate << 6;
+ u64 m_i, o = req->rate, i = req->best_parent_rate, d = (u64) req->rate << 6;
u64 m = 0, n = 0, p = 0;
int p_i, n_i;
- pr_debug("%s: %lu/%lu\n", clk_hw_get_name(hw), *parent_rate, rate);
+ pr_debug("%s: %lu/%lu\n", clk_hw_get_name(hw), req->best_parent_rate, req->rate);
- if (rate > 266500000)
+ if (req->rate > 266500000)
return -EINVAL;
/* Have to check all 20 possibilities to find the minimal M */
@@ -614,9 +614,9 @@ static long clk_hclk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
}
}
- if (d == (u64)rate << 6) {
+ if (d == (u64) req->rate << 6) {
pr_err("%s: %lu: no valid PLL parameters are found\n",
- clk_hw_get_name(hw), rate);
+ clk_hw_get_name(hw), req->rate);
return -EINVAL;
}
@@ -634,22 +634,25 @@ static long clk_hclk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
if (!d)
pr_debug("%s: %lu: found exact match: %llu/%llu/%llu\n",
- clk_hw_get_name(hw), rate, m, n, p);
+ clk_hw_get_name(hw), req->rate, m, n, p);
else
pr_debug("%s: %lu: found closest: %llu/%llu/%llu - %llu\n",
- clk_hw_get_name(hw), rate, m, n, p, o);
+ clk_hw_get_name(hw), req->rate, m, n, p, o);
- return o;
+ req->rate = o;
+
+ return 0;
}
-static long clk_usb_pll_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
+static int clk_usb_pll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct lpc32xx_pll_clk *clk = to_lpc32xx_pll_clk(hw);
struct clk_hw *usb_div_hw, *osc_hw;
u64 d_i, n_i, m, o;
- pr_debug("%s: %lu/%lu\n", clk_hw_get_name(hw), *parent_rate, rate);
+ pr_debug("%s: %lu/%lu\n", clk_hw_get_name(hw), req->best_parent_rate,
+ req->rate);
/*
* The only supported USB clock is 48MHz, with PLL internal constraints
@@ -657,7 +660,7 @@ static long clk_usb_pll_round_rate(struct clk_hw *hw, unsigned long rate,
* and post-divider must be 4, this slightly simplifies calculation of
* USB divider, USB PLL N and M parameters.
*/
- if (rate != 48000000)
+ if (req->rate != 48000000)
return -EINVAL;
/* USB divider clock */
@@ -685,30 +688,30 @@ static long clk_usb_pll_round_rate(struct clk_hw *hw, unsigned long rate,
clk->m_div = m;
clk->p_div = 2;
clk->mode = PLL_NON_INTEGER;
- *parent_rate = div64_u64(o, d_i);
+ req->best_parent_rate = div64_u64(o, d_i);
- return rate;
+ return 0;
}
}
return -EINVAL;
}
-#define LPC32XX_DEFINE_PLL_OPS(_name, _rc, _sr, _rr) \
+#define LPC32XX_DEFINE_PLL_OPS(_name, _rc, _sr, _dr) \
static const struct clk_ops clk_ ##_name ## _ops = { \
.enable = clk_pll_enable, \
.disable = clk_pll_disable, \
.is_enabled = clk_pll_is_enabled, \
.recalc_rate = _rc, \
.set_rate = _sr, \
- .round_rate = _rr, \
+ .determine_rate = _dr, \
}
LPC32XX_DEFINE_PLL_OPS(pll_397x, clk_pll_397x_recalc_rate, NULL, NULL);
LPC32XX_DEFINE_PLL_OPS(hclk_pll, clk_pll_recalc_rate,
- clk_pll_set_rate, clk_hclk_pll_round_rate);
+ clk_pll_set_rate, clk_hclk_pll_determine_rate);
LPC32XX_DEFINE_PLL_OPS(usb_pll, clk_pll_recalc_rate,
- clk_pll_set_rate, clk_usb_pll_round_rate);
+ clk_pll_set_rate, clk_usb_pll_determine_rate);
static int clk_ddram_is_enabled(struct clk_hw *hw)
{
@@ -955,8 +958,8 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
divider->flags, divider->width);
}
-static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
+static int clk_divider_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct lpc32xx_clk_div *divider = to_lpc32xx_div(hw);
unsigned int bestdiv;
@@ -968,11 +971,15 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
bestdiv &= div_mask(divider->width);
bestdiv = _get_div(divider->table, bestdiv, divider->flags,
divider->width);
- return DIV_ROUND_UP(*prate, bestdiv);
+ req->rate = DIV_ROUND_UP(req->best_parent_rate, bestdiv);
+
+ return 0;
}
- return divider_round_rate(hw, rate, prate, divider->table,
- divider->width, divider->flags);
+ req->rate = divider_round_rate(hw, req->rate, &req->best_parent_rate,
+ divider->table, divider->width, divider->flags);
+
+ return 0;
}
static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -991,7 +998,7 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,
static const struct clk_ops lpc32xx_clk_divider_ops = {
.recalc_rate = clk_divider_recalc_rate,
- .round_rate = clk_divider_round_rate,
+ .determine_rate = clk_divider_determine_rate,
.set_rate = clk_divider_set_rate,
};
--
2.50.1
Powered by blists - more mailing lists