Message-ID: <20250812200344.3253781-14-prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Tue, 12 Aug 2025 21:03:44 +0100
From: Prabhakar <prabhakar.csengg@...il.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
	Magnus Damm <magnus.damm@...il.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>
Cc: linux-renesas-soc@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Prabhakar <prabhakar.csengg@...il.com>,
	Biju Das <biju.das.jz@...renesas.com>,
	Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
	Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: [PATCH 13/13] arm64: dts: renesas: rzt2h/rzn2h: Enable SD card slot

From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>

Enable SD card slot which is connected to SDHI0 on the RZ/T2H and
RZ/N2H EVKs.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
---
 .../dts/renesas/r9a09g077m44-rzt2h-evk.dts    |  5 ++
 .../dts/renesas/r9a09g087m44-rzn2h-evk.dts    |  9 +++
 .../dts/renesas/rzt2h-n2h-evk-common.dtsi     | 55 +++++++++++++++++++
 3 files changed, 69 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
index 1841700b264f..309080767ff2 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
@@ -17,8 +17,13 @@
  * Lets by default enable the eMMC, note we need the below SW settings
  * for eMMC.
  * SW2[1] = ON; SW2[2] = ON
+ *
+ * To enable SD card and disable eMMC on SDHI0 disable the below macro
+ * and set the below switch setting:
+ * SW2[1] = OFF; SW2[2] = ON
  */
 #define SD0_EMMC	1
+#define SD0_SD		(!SD0_EMMC)
 
 /*
  * P17_4 = SD1_CD; SW2[3] = ON
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
index 1b13995e5020..33d9b783ff11 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
@@ -16,8 +16,17 @@
  * Lets by default enable the eMMC, note we need the below SW settings
  * for eMMC.
  * DSW5[1] = ON; DSW5[2] = ON
+ *
+ * To enable SD card and disable eMMC on SDHI0 disable the below macro
+ * and set the below switch setting:
+ * DSW5[1] = OFF; DSW5[2] = ON
+ * DSW15[3] = OFF; DSW15[4] = ON
+ * DSW15[1] = OFF; DSW15[2] = ON
+ * DSW17[7] = OFF; DSW17[8] = ON
+ * DSW17[5] = OFF; DSW17[6] = ON
  */
 #define SD0_EMMC       1
+#define SD0_SD		(!SD0_EMMC)
 
 /*
  * P17_4 = SD1_CD; DSW5[3] = ON; DSW19[1] = OFF; DSW19[2] = ON
diff --git a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
index 304a0c8764ca..f87dde8716d8 100644
--- a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
@@ -37,6 +37,18 @@ reg_3p3v: regulator-3p3v {
 		regulator-always-on;
 	};
 
+#if SD0_SD
+	vqmmc_sdhi0: regulator-vqmmc-sdhi0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VqmmC";
+		gpios = <&pinctrl RZT2H_GPIO(2, 6) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+#endif
+
 #if SD1_MICRO_SD
 	vccq_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";
@@ -104,6 +116,35 @@ sd0-emmc-ctrl-pins {
 		};
 	};
 
+#if SD0_SD
+	sdhi0-pwen-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(2, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SD0_PWEN";
+	};
+#endif
+
+	sdhi0_sd_pins: sd0-sd-group {
+		sd0-sd-data-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 2, 0x29)>, /* SD0_DATA0 */
+				 <RZT2H_PORT_PINMUX(12, 3, 0x29)>, /* SD0_DATA1 */
+				 <RZT2H_PORT_PINMUX(12, 4, 0x29)>, /* SD0_DATA2 */
+				 <RZT2H_PORT_PINMUX(12, 5, 0x29)>, /* SD0_DATA3 */
+				 <RZT2H_PORT_PINMUX(12, 6, 0x29)>, /* SD0_DATA4 */
+				 <RZT2H_PORT_PINMUX(12, 7, 0x29)>, /* SD0_DATA5 */
+				 <RZT2H_PORT_PINMUX(13, 0, 0x29)>, /* SD0_DATA6 */
+				 <RZT2H_PORT_PINMUX(13, 1, 0x29)>; /* SD0_DATA7 */
+		};
+
+		sd0-sd-ctrl-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
+				 <RZT2H_PORT_PINMUX(12, 1, 0x29)>, /* SD0_CMD */
+				 <RZT2H_PORT_PINMUX(22, 5, 0x29)>, /* SD0_CD */
+				 <RZT2H_PORT_PINMUX(22, 6, 0x29)>; /* SD0_WP */
+		};
+	};
+
 #if SD1_MICRO_SD
 	sdhi1-pwen-hog {
 		gpio-hog;
@@ -150,6 +191,20 @@ &sdhi0 {
 };
 #endif
 
+#if SD0_SD
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_sd_pins>;
+	pinctrl-1 = <&sdhi0_sd_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
 #if SD1_MICRO_SD
 &sdhi1 {
 	pinctrl-0 = <&sdhi1_pins>;
-- 
2.50.1

Powered by blists - more mailing lists