linux-kernel - [PATCH 2/5] arm64: dts: imx8ulp: Add CSI and ISI Nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250812081923.1019345-3-guoniu.zhou@oss.nxp.com>
Date: Tue, 12 Aug 2025 16:19:23 +0800
From: guoniu.zhou@....nxp.com
To: linux-media@...r.kernel.org,
	devicetree@...r.kernel.org,
	imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Cc: rmfrfs@...il.com,
	laurent.pinchart@...asonboard.com,
	martink@...teo.de,
	kernel@...i.sm,
	mchehab@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	shawnguo@...nel.org,
	s.hauer@...gutronix.de,
	kernel@...gutronix.de,
	festevam@...il.com,
	frank.li@....com
Subject: [PATCH 2/5] arm64: dts: imx8ulp: Add CSI and ISI Nodes

From: Guoniu Zhou <guoniu.zhou@....com>

The CSI-2 in the i.MX8ULP is almost identical to the version present
in the i.MX8QXP/QM and is routed to the ISI. Add both the ISI and CSI
nodes and mark them as disabled by default since capture is dependent
on an attached camera.

Signed-off-by: Guoniu Zhou <guoniu.zhou@....com>
---
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 67 ++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 2562a35286c2..71abc2a3d505 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/imx8ulp-power.h>
+#include <dt-bindings/reset/imx8ulp-pcc-reset.h>
 #include <dt-bindings/thermal/thermal.h>
 
 #include "imx8ulp-pinfunc.h"
@@ -840,6 +841,72 @@ spdif: spdif@...b0000 {
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
+
+			isi: isi@...c0000 {
+				compatible = "fsl,imx8ulp-isi";
+				reg = <0x2dac0000 0x10000>;
+				interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_ISI>,
+					 <&cgc2 IMX8ULP_CLK_LPAV_AXI_DIV>;
+				clock-names = "axi", "apb";
+				power-domains = <&scmi_devpd IMX8ULP_PD_ISI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						isi_in: endpoint {
+							remote-endpoint = <&mipi_csi_out>;
+						};
+					};
+				};
+			};
+
+			mipi_csi: csi@...f0000 {
+				compatible = "fsl,imx8ulp-mipi-csi2";
+				reg = <0x2daf0000 0x10000>,
+				      <0x2dad0000 0x10000>;
+				clocks = <&pcc5 IMX8ULP_CLK_CSI>,
+					 <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>,
+					 <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>,
+					 <&pcc5 IMX8ULP_CLK_CSI_REGS>;
+				clock-names = "core", "esc", "ui", "pclk";
+				assigned-clocks = <&pcc5 IMX8ULP_CLK_CSI>,
+						  <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>,
+						  <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>,
+						  <&pcc5 IMX8ULP_CLK_CSI_REGS>;
+				assigned-clock-parents = <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV1>,
+							 <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV2>,
+							 <&cgc2 IMX8ULP_CLK_PLL4_PFD0_DIV1>;
+				assigned-clock-rates = <200000000>,
+						       <80000000>,
+						       <100000000>,
+						       <79200000>;
+				power-domains = <&scmi_devpd IMX8ULP_PD_MIPI_CSI>;
+				resets = <&pcc5 PCC5_CSI_SWRST>,
+					 <&pcc5 PCC5_CSI_REGS_SWRST>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_out: endpoint {
+							remote-endpoint = <&isi_in>;
+						};
+					};
+				};
+			};
 		};
 
 		gpiod: gpio@...00000 {
-- 
2.34.1