Message-ID: <CAPDyKFq7z9e9hEC9QWiYcaU=t+Gs_GgRurmK-+cNYp4xkhr5Ow@mail.gmail.com>
Date: Tue, 12 Aug 2025 12:00:47 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Saravana Kannan <saravanak@...gle.com>, Stephen Boyd <sboyd@...nel.org>, linux-pm@...r.kernel.org, 
	"Rafael J . Wysocki" <rafael@...nel.org>, Greg Kroah-Hartman <gregkh@...uxfoundation.org>, 
	Michael Grzeschik <m.grzeschik@...gutronix.de>, Bjorn Andersson <andersson@...nel.org>, 
	Abel Vesa <abel.vesa@...aro.org>, Peng Fan <peng.fan@....nxp.com>, 
	Tomi Valkeinen <tomi.valkeinen@...asonboard.com>, Johan Hovold <johan@...nel.org>, 
	Maulik Shah <maulik.shah@....qualcomm.com>, Michal Simek <michal.simek@....com>, 
	Konrad Dybcio <konradybcio@...nel.org>, Thierry Reding <thierry.reding@...il.com>, 
	Jonathan Hunter <jonathanh@...dia.com>, Hiago De Franco <hiago.franco@...adex.com>, 
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, 
	Linux-Renesas <linux-renesas-soc@...r.kernel.org>
Subject: Re: [PATCH v3 00/24] pmdomain: Add generic ->sync_state() support to genpd

On Thu, 7 Aug 2025 at 11:38, Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
>
> Hi Ulf,
>
> On Wed, 30 Jul 2025 at 12:29, Ulf Hansson <ulf.hansson@...aro.org> wrote:
> > On Wed, 30 Jul 2025 at 11:56, Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> > > On Wed, 9 Jul 2025 at 13:31, Ulf Hansson <ulf.hansson@...aro.org> wrote:
> > > > On Tue, 1 Jul 2025 at 13:47, Ulf Hansson <ulf.hansson@...aro.org> wrote:
> > > > > Changes in v3:
> > > > >         - Added a couple of patches to adress problems on some Renesas
> > > > >         platforms. Thanks Geert and Tomi for helping out!
> > > > >         - Adressed a few comments from Saravanna and Konrad.
> > > > >         - Added some tested-by tags.
> > > >
> > > > I decided it was time to give this a try, so I have queued this up for
> > > > v6.17 via the next branch at my pmdomain tree.
> > > >
> > > > If you encounter any issues, please let me know so I can help to fix them.
> > >
> > > Thanks for your series!  Due to holidays, I only managed to test
> > > this very recently.
> > >
> > > Unfortunately I have an issue with unused PM Domains no longer being
> > > disabled on R-Car:
> > >   - On R-Car Gen1/2/3, using rcar-sysc.c, unused PM Domains are never
> > >     disabled.
> > >   - On R-Car Gen4, using rcar-gen4-sysc.c, unused PM Domains are
> > >     sometimes not disabled.
> > >     At first, I noticed the IOMMU driver was not enabled in my config,
> > >     and enabling it did fix the issue.  However, after that I still
> > >     encountered the issue in a different config that does have the
> > >     IOMMU driver enabled...
> > >
> > > FTR, unused PM Domains are still disabled correctly on R/SH-Mobile
> > > (using rmobile-sysc.c) and on BeagleBone Black. Note that these use
> > > of_genpd_add_provider_simple(), while all R-Car drivers use
> > > of_genpd_add_provider_onecell().  Perhaps there is an issue with
> > > the latter?  If you don't have a clue, I plan to do some more
> > > investigation later...
>
> of_genpd_add_provider_onecell() has:
>
>     if (!dev)
>             sync_state = true;
>     else
>             dev_set_drv_sync_state(dev, genpd_sync_state);
>
>     for (i = 0; i < data->num_domains; i++) {
>             ...
>             if (sync_state && !genpd_is_no_sync_state(genpd)) {
>                     genpd->sync_state = GENPD_SYNC_STATE_ONECELL;
>                     device_set_node(&genpd->dev, fwnode);
>                     sync_state = false;
>                     ^^^^^^^^^^^^^^^^^^^
>             }
>             ...
>     }
>
> As the R-Car SYSC drivers are not platform drivers, dev is NULL, and
> genpd->sync_state is set to GENPD_SYNC_STATE_ONECELL for the first PM
> Domain only.  All other domains have the default value of sync_state
> (0 = GENPD_SYNC_STATE_OFF).  Hence when genpd_provider_sync_state()
> is called later, it ignores all but the first domain.
> Apparently this is intentional, as of_genpd_sync_state() tries to
> power off all domains handled by the same controller anyway (see below)?

Right, this is intentional and mainly because of how fw_devlink works.

fw_devlink is limited to use only the first device - if multiple
devices share the same fwnode. In principle, we could have picked any
of the devices in the array of genpds here - and reached the same
result.

>
> > > BTW, the "pending due to"-messages look weird to me.
> > > On R-Car M2-W (r8a7791.dtsi) I see e.g.:
> > >
> > >     genpd_provider ca15-cpu0: sync_state() pending due to e6020000.watchdog
> > >     renesas-cpg-mssr e6150000.clock-controller: sync_state() pending
> > > due to e6020000.watchdog
> > >
> > > ca15-cpu0 is the PM Domain holding the first CPU core, while
> > > the watchdog resides in the always-on Clock Domain, and uses the
> > > clock-controller for PM_CLK handling.
>
> Unfortunately the first PM Domain is "ca15-cpu0", which is blocked on
> these bogus pending states, and no PM Domain is powered off.

I see, thanks for the details. I am looking closer at this.

In any case, this is the main issue, as it prevents the ->sync_state()
callback to be called. Hence the "genpd->stay_on" will also *not* be
cleared for any of the genpd's for the genpd-provider.

>
> If I remove the "sync_state = false" above, genpd_provider_sync_state()
> considers all domains, and does power down all unused domains (even
> multiple times, as expected).

I think those are getting called because with the change above, there
is no device_link being tracked. As stated above, fw_devlink is
limited to use only one device - if multiple devices share the same
fwnode.

In other words, the ->sync_state() callbacks are called even if the
corresponding consumer devices have not been probed yet.

>
> Upon closer look, all "pending due to" messages I see claim that the
> first (index 0) PM Domain is pending on some devices, while all of
> these devices are part of a different domain (usually the always-on
> domain, which is always the last (32 or 64) on R-Car).
>
> So I think there are two issues:
>   1. Devices are not attributed to the correct PM Domain using
>      fw_devlink sync_state,
>   2. One PM Domain of a multi-domain controller being blocked should
>      not block all other domains handled by the same controller.

Right, that's a current limitation with fw_devlink. To cope with this,
it's possible to enforce the ->sync_state() callback to be invoked
from user-space (timeout or explicitly) for a device.

Another option would be to allow an opt-out behavior for some genpd's
that are powered-on at initialization. Something along the lines of
the below.

From: Ulf Hansson <ulf.hansson@...aro.org>
Date: Tue, 29 Jul 2025 14:27:22 +0200
Subject: [PATCH] pmdomain: core: Allow powered-on PM domains to be powered-off
 during boot

Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
---
 drivers/pmdomain/core.c   | 3 ++-
 include/linux/pm_domain.h | 7 +++++++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/pmdomain/core.c b/drivers/pmdomain/core.c
index 0006ab3d0789..ef0760824c92 100644
--- a/drivers/pmdomain/core.c
+++ b/drivers/pmdomain/core.c
@@ -187,6 +187,7 @@ static const struct genpd_lock_ops genpd_raw_spin_ops = {
 #define genpd_is_opp_table_fw(genpd)   (genpd->flags & GENPD_FLAG_OPP_TABLE_FW)
 #define genpd_is_dev_name_fw(genpd)    (genpd->flags & GENPD_FLAG_DEV_NAME_FW)
 #define genpd_is_no_sync_state(genpd)  (genpd->flags &
GENPD_FLAG_NO_SYNC_STATE)
+#define genpd_is_no_stay_on(genpd)     (genpd->flags & GENPD_FLAG_NO_STAY_ON)

 static inline bool irq_safe_dev_in_sleep_domain(struct device *dev,
                const struct generic_pm_domain *genpd)
@@ -2392,7 +2393,7 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
        INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn);
        atomic_set(&genpd->sd_count, 0);
        genpd->status = is_off ? GENPD_STATE_OFF : GENPD_STATE_ON;
-       genpd->stay_on = !is_off;
+       genpd->stay_on = !genpd_is_no_stay_on(genpd) && !is_off;
        genpd->sync_state = GENPD_SYNC_STATE_OFF;
        genpd->device_count = 0;
        genpd->provider = NULL;
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index b9d3c7d5c4f8..61b81574efc4 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -109,6 +109,12 @@ struct dev_pm_domain_list {
  *                             genpd provider specific way, likely through a
  *                             parent device node. This flag makes genpd to
  *                             skip its internal support for this.
+ *
+ * GENPD_FLAG_NO_STAY_ON:      A powered-on PM domain at initialization is
+ *                             prevented by genpd from being powered-off until
+ *                             we receive a ->sync_state() or runs the
+ *                             late_initcall_sync. Use this flag to allow
+ *                             power-off without waiting for these conditions.
  */
 #define GENPD_FLAG_PM_CLK       (1U << 0)
 #define GENPD_FLAG_IRQ_SAFE     (1U << 1)
@@ -120,6 +126,7 @@ struct dev_pm_domain_list {
 #define GENPD_FLAG_OPP_TABLE_FW         (1U << 7)
 #define GENPD_FLAG_DEV_NAME_FW  (1U << 8)
 #define GENPD_FLAG_NO_SYNC_STATE (1U << 9)
+#define GENPD_FLAG_NO_STAY_ON   (1U << 10)

 enum gpd_status {
        GENPD_STATE_ON = 0,     /* PM domain is on */
-- 
2.43.0

Kind regards
Uffe

Powered by blists - more mailing lists