[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250813-x1e80100-disable-audio-codecs-v1-7-af82d9576f80@linaro.org>
Date: Wed, 13 Aug 2025 17:59:04 +0200
From: Stephan Gerhold <stephan.gerhold@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Abel Vesa <abel.vesa@...aro.org>,
Johan Hovold <johan@...nel.org>
Subject: [PATCH 7/9] arm64: dts: qcom: x1e80100-microsoft-romulus:
Explicitly enable used audio codecs
Currently, the macro audio codecs are enabled by default in x1e80100.dtsi.
However, they do not probe without the ADSP remoteproc, which is disabled
by default. Also, not all boards make use of all the audio codecs, e.g.
there are several boards with just two speakers. In this case, the
&lpass_wsa2macro is not used.
In preparation of disabling the audio codecs by default in x1e80100.dtsi,
add the missing status lines to explicitly enable the used audio codecs.
Signed-off-by: Stephan Gerhold <stephan.gerhold@...aro.org>
---
arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
index 27dd5e4e9939124360544ee9c59900ebb01f3f49..6dd4da08a1d256a341fb5f6b4989852709f68519 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
@@ -921,7 +921,13 @@ retimer_ss1_con_sbu_out: endpoint {
};
};
+&lpass_rxmacro {
+ status = "okay";
+};
+
&lpass_tlmm {
+ status = "okay";
+
spkr_01_sd_n_active: spkr-01-sd-n-active-state {
pins = "gpio12";
function = "gpio";
@@ -931,6 +937,10 @@ spkr_01_sd_n_active: spkr-01-sd-n-active-state {
};
};
+&lpass_txmacro {
+ status = "okay";
+};
+
&lpass_vamacro {
qcom,dmic-sample-rate = <4800000>;
@@ -938,6 +948,12 @@ &lpass_vamacro {
pinctrl-0 = <&dmic01_default>;
pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&lpass_wsamacro {
+ status = "okay";
};
&mdss {
--
2.50.1
Powered by blists - more mailing lists