linux-kernel - [PATCH net-next v1 5/5] net: phy: dp83td510: add MSE interface support for 10BASE-T1L

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250813081453.3567604-6-o.rempel@pengutronix.de>
Date: Wed, 13 Aug 2025 10:14:53 +0200
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Andrew Lunn <andrew@...n.ch>,
	Jakub Kicinski <kuba@...nel.org>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Paolo Abeni <pabeni@...hat.com>,
	Simon Horman <horms@...nel.org>,
	Donald Hunter <donald.hunter@...il.com>,
	Jonathan Corbet <corbet@....net>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	Kory Maincent <kory.maincent@...tlin.com>,
	Maxime Chevallier <maxime.chevallier@...tlin.com>,
	Nishanth Menon <nm@...com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
	kernel@...gutronix.de,
	linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org,
	UNGLinuxDriver@...rochip.com,
	linux-doc@...r.kernel.org,
	Michal Kubecek <mkubecek@...e.cz>,
	Roan van Dijk <roan@...tonic.nl>
Subject: [PATCH net-next v1 5/5] net: phy: dp83td510: add MSE interface support for 10BASE-T1L

Implement get_mse_config() and get_mse_snapshot() for the DP83TD510E
to expose its Mean Square Error (MSE) register via the new PHY MSE
UAPI.

The DP83TD510E does not document any peak MSE values; it only exposes
a single average MSE register used internally to derive SQI. This
implementation therefore advertises only PHY_MSE_CAP_AVG, along with
LINK and channel-A selectors. Scaling is fixed to 0xFFFF, and the
refresh interval/number of symbols are estimated from 10BASE-T1L
symbol rate (7.5 MBd) and typical diagnostic intervals (~1 ms).

For 10BASE-T1L deployments, SQI is a reliable indicator of link
modulation quality once the link is established, but it does not
indicate whether autonegotiation pulses will be correctly received
in marginal conditions. MSE provides a direct measurement of slicer
error rate that can be used to evaluate if autonegotiation is likely
to succeed under a given cable length and condition. In practice,
testing such scenarios often requires forcing a fixed-link setup to
isolate MSE behaviour from the autonegotiation process.

Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
---
 drivers/net/phy/dp83td510.c | 44 +++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c
index 23af1ac194fa..094c070f3f96 100644
--- a/drivers/net/phy/dp83td510.c
+++ b/drivers/net/phy/dp83td510.c
@@ -249,6 +249,47 @@ struct dp83td510_priv {
 #define DP83TD510E_ALCD_COMPLETE			BIT(15)
 #define DP83TD510E_ALCD_CABLE_LENGTH			GENMASK(10, 0)
 
+static int dp83td510_get_mse_config(struct phy_device *phydev,
+				    struct phy_mse_config *config)
+{
+	/* The DP83TD510E datasheet does not specify peak MSE values.
+	 * It only provides a single MSE value which is used to derive SQI.
+	 * Therefore, we only support the average MSE capability.
+	 */
+	config->supported_caps = PHY_MSE_CAP_AVG | PHY_MSE_CAP_LINK |
+		PHY_MSE_CAP_CHANNEL_A;
+	config->max_average_mse = 0xFFFF;
+
+	/* The datasheet does not specify the refresh rate or symbol count,
+	 * but based on similar PHYs and standards, we can assume a common
+	 * value. For 10BaseT1L, the symbol rate is 7.5 MBd. A common
+	 * diagnostic interval is around 1ms.
+	 * 7.5e6 symbols/sec * 0.001 sec = 7500 symbols.
+	 */
+	config->refresh_rate_ps = 1000000000; /* 1 ms */
+	config->num_symbols = 7500;
+
+	return 0;
+}
+
+static int dp83td510_get_mse_snapshot(struct phy_device *phydev, u32 channel,
+				      struct phy_mse_snapshot *snapshot)
+{
+	int ret;
+
+	if (channel != PHY_MSE_CHANNEL_LINK &&
+	    channel != PHY_MSE_CHANNEL_A)
+		return -EOPNOTSUPP;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_MSE_DETECT);
+	if (ret < 0)
+		return ret;
+
+	snapshot->average_mse = ret;
+
+	return 0;
+}
+
 static int dp83td510_led_brightness_set(struct phy_device *phydev, u8 index,
 					enum led_brightness brightness)
 {
@@ -893,6 +934,9 @@ static struct phy_driver dp83td510_driver[] = {
 	.get_phy_stats	= dp83td510_get_phy_stats,
 	.update_stats	= dp83td510_update_stats,
 
+	.get_mse_config	= dp83td510_get_mse_config,
+	.get_mse_snapshot = dp83td510_get_mse_snapshot,
+
 	.led_brightness_set = dp83td510_led_brightness_set,
 	.led_hw_is_supported = dp83td510_led_hw_is_supported,
 	.led_hw_control_set = dp83td510_led_hw_control_set,
-- 
2.39.5