| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250814223839.3256046-9-b-padhi@ti.com>
Date: Fri, 15 Aug 2025 04:08:14 +0530
From: Beleswar Padhi <b-padhi@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <afd@...com>, <u-kumar1@...com>, <hnagalla@...com>, <jm@...com>,
<b-padhi@...com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 08/33] arm64: dts: ti: k3-j721s2: Enable remote processors at board level
Remote Processors defined in top-level J721S2 SoC dtsi files are
incomplete without the memory carveouts and mailbox assignments which
are only known at board integration level.
Therefore, disable the remote processors at SoC level and enable them at
board level where above information is available.
Signed-off-by: Beleswar Padhi <b-padhi@...com>
---
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi | 12 ++++++++++++
arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 12 ++++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 6 ++++++
arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 3 +++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 12 ++++++++++++
5 files changed, 45 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
index fd715fee8170..383594732e81 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
@@ -371,24 +371,28 @@ &main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&main_r5fss0_core0_memory_region>;
+ status = "okay";
};
&main_r5fss0_core1 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
memory-region = <&main_r5fss0_core1_dma_memory_region>,
<&main_r5fss0_core1_memory_region>;
+ status = "okay";
};
&main_r5fss1_core0 {
mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
memory-region = <&main_r5fss1_core0_dma_memory_region>,
<&main_r5fss1_core0_memory_region>;
+ status = "okay";
};
&main_r5fss1_core1 {
mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
memory-region = <&main_r5fss1_core1_dma_memory_region>,
<&main_r5fss1_core1_memory_region>;
+ status = "okay";
};
/* eMMC */
@@ -407,10 +411,12 @@ &main_sdhci1 {
&main_r5fss0 {
ti,cluster-mode = <0>;
+ status = "okay";
};
&main_r5fss1 {
ti,cluster-mode = <0>;
+ status = "okay";
};
/* Timers are used by Remoteproc firmware */
@@ -438,16 +444,22 @@ &main_timer5 {
status = "reserved";
};
+&mcu_r5fss0 {
+ status = "okay";
+};
+
&mcu_r5fss0_core0 {
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
+ status = "okay";
};
&mcu_r5fss0_core1 {
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
+ status = "okay";
};
&ospi0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
index 4ca2d4e2fb9b..2d2edeeb7347 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
@@ -291,24 +291,32 @@ mbox_c71_1: mbox-c71-1 {
};
};
+&mcu_r5fss0 {
+ status = "okay";
+};
+
&mcu_r5fss0_core0 {
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
+ status = "okay";
};
&mcu_r5fss0_core1 {
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
+ status = "okay";
};
&main_r5fss0 {
ti,cluster-mode = <0>;
+ status = "okay";
};
&main_r5fss1 {
ti,cluster-mode = <0>;
+ status = "okay";
};
/* Timers are used by Remoteproc firmware */
@@ -340,24 +348,28 @@ &main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&main_r5fss0_core0_memory_region>;
+ status = "okay";
};
&main_r5fss0_core1 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
memory-region = <&main_r5fss0_core1_dma_memory_region>,
<&main_r5fss0_core1_memory_region>;
+ status = "okay";
};
&main_r5fss1_core0 {
mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
memory-region = <&main_r5fss1_core0_dma_memory_region>,
<&main_r5fss1_core0_memory_region>;
+ status = "okay";
};
&main_r5fss1_core1 {
mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
memory-region = <&main_r5fss1_core1_dma_memory_region>,
<&main_r5fss1_core1_memory_region>;
+ status = "okay";
};
&c71_0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 726374dc8795..6aa4da5b7df4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1894,6 +1894,7 @@ main_r5fss0: r5fss@...0000 {
ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
<0x5d00000 0x00 0x5d00000 0x20000>;
power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss0_core0: r5f@...0000 {
compatible = "ti,j721s2-r5f";
@@ -1908,6 +1909,7 @@ main_r5fss0_core0: r5f@...0000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss0_core1: r5f@...0000 {
@@ -1923,6 +1925,7 @@ main_r5fss0_core1: r5f@...0000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
@@ -1934,6 +1937,7 @@ main_r5fss1: r5fss@...0000 {
ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
<0x5f00000 0x00 0x5f00000 0x20000>;
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
main_r5fss1_core0: r5f@...0000 {
compatible = "ti,j721s2-r5f";
@@ -1948,6 +1952,7 @@ main_r5fss1_core0: r5f@...0000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
main_r5fss1_core1: r5f@...0000 {
@@ -1963,6 +1968,7 @@ main_r5fss1_core1: r5f@...0000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index bc31266126d0..837097751c18 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -690,6 +690,7 @@ mcu_r5fss0: r5fss@...00000 {
ranges = <0x41000000 0x00 0x41000000 0x20000>,
<0x41400000 0x00 0x41400000 0x20000>;
power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
mcu_r5fss0_core0: r5f@...00000 {
compatible = "ti,j721s2-r5f";
@@ -704,6 +705,7 @@ mcu_r5fss0_core0: r5f@...00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
mcu_r5fss0_core1: r5f@...00000 {
@@ -719,6 +721,7 @@ mcu_r5fss0_core1: r5f@...00000 {
ti,atcm-enable = <1>;
ti,btcm-enable = <1>;
ti,loczrama = <1>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index a9dbe14fb0c9..f252007262d3 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -572,24 +572,32 @@ mbox_c71_1: mbox-c71-1 {
};
};
+&mcu_r5fss0 {
+ status = "okay";
+};
+
&mcu_r5fss0_core0 {
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
+ status = "okay";
};
&mcu_r5fss0_core1 {
mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
+ status = "okay";
};
&main_r5fss0 {
ti,cluster-mode = <0>;
+ status = "okay";
};
&main_r5fss1 {
ti,cluster-mode = <0>;
+ status = "okay";
};
/* Timers are used by Remoteproc firmware */
@@ -621,24 +629,28 @@ &main_r5fss0_core0 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
memory-region = <&main_r5fss0_core0_dma_memory_region>,
<&main_r5fss0_core0_memory_region>;
+ status = "okay";
};
&main_r5fss0_core1 {
mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
memory-region = <&main_r5fss0_core1_dma_memory_region>,
<&main_r5fss0_core1_memory_region>;
+ status = "okay";
};
&main_r5fss1_core0 {
mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
memory-region = <&main_r5fss1_core0_dma_memory_region>,
<&main_r5fss1_core0_memory_region>;
+ status = "okay";
};
&main_r5fss1_core1 {
mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
memory-region = <&main_r5fss1_core1_dma_memory_region>,
<&main_r5fss1_core1_memory_region>;
+ status = "okay";
};
&c71_0 {
--
2.34.1
Powered by blists - more mailing lists