| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250814223839.3256046-23-b-padhi@ti.com>
Date: Fri, 15 Aug 2025 04:08:28 +0530
From: Beleswar Padhi <b-padhi@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <afd@...com>, <u-kumar1@...com>, <hnagalla@...com>, <jm@...com>,
<b-padhi@...com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 22/33] arm64: dts: ti: k3-am62-ti-ipc-firmware: Refactor IPC cfg into new dtsi
The TI K3 AM62 SoCs have multiple programmable remote processors like
R5F, M4F etc. The TI SDKs for AM62 SoCs offer sample firmwares which
could be run on these cores to demonstrate an "echo" IPC test. Those
firmware require certain memory carveouts to be reserved from system
memory, timers to be reserved, and certain mailbox configurations for
interrupt based messaging. These configurations could be different for a
different firmware.
While DT is not meant for system configurations, at least refactor these
configurations from board level DTS into a dtsi for now. This dtsi for
TI IPC firmware is board-independent and can be applied to all boards
from the same SoC Family. This gets rid of code duplication and allows
more freedom for users developing custom firmware (or no firmware) to
utilize system resources better; easily by swapping out this dtsi. To
maintain backward compatibility, the dtsi is included in all boards.
Signed-off-by: Beleswar Padhi <b-padhi@...com>
---
.../boot/dts/ti/k3-am62-phycore-som.dtsi | 44 +---------------
.../boot/dts/ti/k3-am62-pocketbeagle2.dts | 45 +---------------
.../boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi | 52 +++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 33 +-----------
.../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 46 +---------------
5 files changed, 59 insertions(+), 161 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index dcd22ff487ec..34b2e8d6bf80 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -52,18 +52,6 @@ rtos_ipc_memory_region: ipc-memories@...00000 {
no-map;
};
- mcu_m4fss_dma_memory_region: m4f-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cb00000 0x00 0x100000>;
- no-map;
- };
-
- mcu_m4fss_memory_region: m4f-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cc00000 0x00 0xe00000>;
- no-map;
- };
-
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9da00000 0x00 0x100000>;
@@ -245,20 +233,6 @@ cpsw3g_phy1: ethernet-phy@1 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
&main_pktdma {
bootph-all;
};
@@ -364,13 +338,6 @@ i2c_som_rtc: rtc@52 {
};
};
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;
@@ -399,13 +366,4 @@ &sdhci0 {
status = "okay";
};
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
- status = "okay";
-};
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
index 2140e0cdec85..e634abe9e8e6 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
@@ -54,18 +54,6 @@ linux,cma {
linux,cma-default;
};
- mcu_m4fss_dma_memory_region: m4f-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cb00000 0x00 0x100000>;
- no-map;
- };
-
- mcu_m4fss_memory_region: m4f-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cc00000 0x00 0xe00000>;
- no-map;
- };
-
secure_tfa_ddr: tfa@...80000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
alignment = <0x1000>;
@@ -298,19 +286,6 @@ &epwm2 {
pinctrl-0 = <&epwm2_pins_default>;
};
-&mailbox0_cluster0 {
- status = "okay";
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
@@ -361,24 +336,6 @@ &main_i2c2 {
status = "okay";
};
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
- status = "okay";
-};
-
&mcu_pmx0 {
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
@@ -542,3 +499,5 @@ ldo4_reg: ldo4 {
};
};
};
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..9376ae91a17f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62 SoCs
+ *
+ * Copyright (C) 2021-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ mcu_m4fss_dma_memory_region: m4f-dma-memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9cb00000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_m4fss_memory_region: m4f-memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9cc00000 0x00 0xe00000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_m4_0: mbox-m4-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
+};
+
+&mcu_m4fss {
+ mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
+ memory-region = <&mcu_m4fss_dma_memory_region>,
+ <&mcu_m4fss_memory_region>;
+ status = "okay";
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index 1c44d17281dd..fd83dbc9f37b 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -1334,37 +1334,6 @@ &main_i2c3 {
status = "disabled";
};
-&mailbox0_cluster0 {
- status = "okay";
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
- status = "okay";
-};
-
/* Verdin CAN_1 */
&main_mcan0 {
pinctrl-names = "default";
@@ -1548,3 +1517,5 @@ &wkup_uart0 {
pinctrl-0 = <&pinctrl_wkup_uart0>;
status = "disabled";
};
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 03b8e246d8c2..ec2685144558 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -58,18 +58,6 @@ linux,cma {
linux,cma-default;
};
- mcu_m4fss_dma_memory_region: m4f-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cb00000 0x00 0x100000>;
- no-map;
- };
-
- mcu_m4fss_memory_region: m4f-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9cc00000 0x00 0xe00000>;
- no-map;
- };
-
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9da00000 0x00 0x100000>;
@@ -477,38 +465,6 @@ cpsw3g_phy0: ethernet-phy@0 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_m4_0: mbox-m4-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <2 0 0>;
- ti,mbox-tx = <3 0 0>;
- };
-};
-
-&mcu_m4fss {
- mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
- memory-region = <&mcu_m4fss_dma_memory_region>,
- <&mcu_m4fss_memory_region>;
- status = "okay";
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
- status = "okay";
-};
-
&usbss0 {
bootph-all;
status = "okay";
@@ -601,3 +557,5 @@ &epwm1 {
pinctrl-0 = <&main_epwm1_pins_default>;
status = "okay";
};
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
--
2.34.1
Powered by blists - more mailing lists