| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250814223839.3256046-26-b-padhi@ti.com>
Date: Fri, 15 Aug 2025 04:08:31 +0530
From: Beleswar Padhi <b-padhi@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <afd@...com>, <u-kumar1@...com>, <hnagalla@...com>, <jm@...com>,
<b-padhi@...com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH 25/33] arm64: dts: ti: k3-am62a-ti-ipc-firmware: Refactor IPC cfg into new dtsi
The TI K3 AM62A SoCs have multiple programmable remote processors like
R5F, C7x etc. The TI SDKs for AM62A SoCs offer sample firmwares which
could be run on these cores to demonstrate an "echo" IPC test. Those
firmware require certain memory carveouts to be reserved from system
memory, timers to be reserved, and certain mailbox configurations for
interrupt based messaging. These configurations could be different for a
different firmware.
While DT is not meant for system configurations, at least refactor these
configurations from board level DTS into a dtsi for now. This dtsi for
TI IPC firmware is board-independent and can be applied to all boards
from the same SoC Family. This gets rid of code duplication and allows
more freedom for users developing custom firmware (or no firmware) to
utilize system resources better; easily by swapping out this dtsi. To
maintain backward compatibility, the dtsi is included in all boards.
Signed-off-by: Beleswar Padhi <b-padhi@...com>
---
.../boot/dts/ti/k3-am62a-phycore-som.dtsi | 90 +----------------
.../boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi | 98 +++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 92 +----------------
arch/arm64/boot/dts/ti/k3-am62d2-evm.dts | 76 +-------------
4 files changed, 102 insertions(+), 254 deletions(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index 3108e9b0c804..44c73ed637da 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -59,30 +59,6 @@ linux,cma {
linux,cma-default;
};
- c7x_0_dma_memory_region: c7x-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99800000 0x00 0x100000>;
- no-map;
- };
-
- c7x_0_memory_region: c7x-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99900000 0x00 0xf00000>;
- no-map;
- };
-
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b800000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: r5f-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b900000 0x00 0xf00000>;
- no-map;
- };
-
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c800000 0x00 0x100000>;
@@ -209,13 +185,6 @@ opp-1400000000 {
};
};
-&c7x_0 {
- mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
- memory-region = <&c7x_0_dma_memory_region>,
- <&c7x_0_memory_region>;
- status = "okay";
-};
-
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&main_rgmii1_pins_default>;
@@ -246,33 +215,6 @@ &fss {
status = "okay";
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
-
- mbox_c7x_0: mbox-c7x-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
@@ -388,27 +330,6 @@ &main_pktdma {
bootph-all;
};
-/* main_rti4 is used by C7x DSP */
-&main_rti4 {
- status = "reserved";
-};
-
-/* main_timer2 is used by C7x DSP */
-&main_timer2 {
- status = "reserved";
-};
-
-&mcu_r5fss0 {
- status = "okay";
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
- status = "okay";
-};
-
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;
@@ -437,13 +358,4 @@ &sdhci0 {
status = "okay";
};
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
- status = "okay";
-};
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..91583cd23b12
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62A SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+ c7x_0_dma_memory_region: c7x-dma-memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99800000 0x00 0x100000>;
+ no-map;
+ };
+
+ c7x_0_memory_region: c7x-memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x99900000 0x00 0xf00000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b800000 0x00 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-dma-memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9b900000 0x00 0xf00000>;
+ no-map;
+ };
+};
+
+&mailbox0_cluster0 {
+ status = "okay";
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster1 {
+ status = "okay";
+
+ mbox_c7x_0: mbox-c7x-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&mailbox0_cluster2 {
+ status = "okay";
+
+ mbox_mcu_r5_0: mbox-mcu-r5-0 {
+ ti,mbox-rx = <0 0 0>;
+ ti,mbox-tx = <1 0 0>;
+ };
+};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&mcu_r5fss0 {
+ status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+ memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+ <&mcu_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
+&c7x_0 {
+ mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+ memory-region = <&c7x_0_dma_memory_region>,
+ <&c7x_0_memory_region>;
+ status = "okay";
+};
+
+/* main_rti4 is used by C7x DSP */
+&main_rti4 {
+ status = "reserved";
+};
+
+/* main_timer2 is used by C7x DSP */
+&main_timer2 {
+ status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 7ebcfe8edfe1..ede03f449d65 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -53,30 +53,6 @@ linux,cma {
linux,cma-default;
};
- c7x_0_dma_memory_region: c7x-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99800000 0x00 0x100000>;
- no-map;
- };
-
- c7x_0_memory_region: c7x-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99900000 0x00 0xf00000>;
- no-map;
- };
-
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b800000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: r5f-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b900000 0x00 0xf00000>;
- no-map;
- };
-
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c800000 0x00 0x100000>;
@@ -713,11 +689,6 @@ &main_uart1 {
status = "reserved";
};
-/* main_timer2 is used by C7x DSP */
-&main_timer2 {
- status = "reserved";
-};
-
&usbss0 {
status = "okay";
ti,vbus-divider;
@@ -835,67 +806,6 @@ &epwm1 {
status = "okay";
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
-
- mbox_c7x_0: mbox-c7x-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
-&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
- status = "okay";
-};
-
-&mcu_r5fss0 {
- status = "okay";
-};
-
-&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
- status = "okay";
-};
-
-&c7x_0 {
- mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
- memory-region = <&c7x_0_dma_memory_region>,
- <&c7x_0_memory_region>;
- status = "okay";
-};
-
-/* main_rti4 is used by C7x DSP */
-&main_rti4 {
- status = "reserved";
-};
-
&fss {
status = "okay";
};
@@ -937,3 +847,5 @@ AM62AX_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
>;
};
};
+
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
index 41860ac42f3c..a57fc2362dfd 100644
--- a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
@@ -58,30 +58,6 @@ secure_tfa_ddr: tfa@...00000 {
no-map;
};
- c7x_0_dma_memory_region: c7x-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99800000 0x00 0x100000>;
- no-map;
- };
-
- c7x_0_memory_region: c7x-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x99900000 0x00 0xf00000>;
- no-map;
- };
-
- mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b800000 0x00 0x100000>;
- no-map;
- };
-
- mcu_r5fss0_core0_memory_region: r5f-dma-memory@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9b900000 0x00 0xf00000>;
- no-map;
- };
-
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c800000 0x00 0x100000>;
@@ -551,66 +527,16 @@ cpsw3g_phy1: ethernet-phy@3 {
};
};
-&mailbox0_cluster0 {
- status = "okay";
-
- mbox_r5_0: mbox-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster1 {
- status = "okay";
-
- mbox_c7x_0: mbox-c7x-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&mailbox0_cluster2 {
- status = "okay";
-
- mbox_mcu_r5_0: mbox-mcu-r5-0 {
- ti,mbox-rx = <0 0 0>;
- ti,mbox-tx = <1 0 0>;
- };
-};
-
-&wkup_r5fss0 {
- status = "okay";
-};
-
&wkup_r5fss0_core0 {
- mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
- memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
- <&wkup_r5fss0_core0_memory_region>;
- status = "okay";
bootph-pre-ram;
};
-&mcu_r5fss0 {
- status = "okay";
-};
-
&mcu_r5fss0_core0 {
- mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>;
- memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
- <&mcu_r5fss0_core0_memory_region>;
firmware-name = "am62d-mcu-r5f0_0-fw";
- status = "okay";
};
&c7x_0 {
- mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
- memory-region = <&c7x_0_dma_memory_region>,
- <&c7x_0_memory_region>;
firmware-name = "am62d-c71_0-fw";
- status = "okay";
};
-/* main_rti4 is used by C7x DSP */
-&main_rti4 {
- status = "reserved";
-};
+#include "k3-am62a-ti-ipc-firmware.dtsi"
--
2.34.1
Powered by blists - more mailing lists