[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <jmhzng2ezrrqhy52y7eru2ik6uburn4rnilfwreqmvkeirqbnm@b5ksjlufwuwf>
Date: Thu, 14 Aug 2025 12:54:00 +0200
From: Uwe Kleine-König <ukleinek@...nel.org>
To: Daniel Lezcano <daniel.lezcano@...aro.org>
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
Frank.Li@....com, linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Ghennadi.Procopciuc@....com, s32@....com
Subject: Re: [PATCH v3 0/2] Add the s32g2 and s32g3 FTM PWM support
Hello Daniel,
On Tue, Aug 12, 2025 at 10:00:34PM +0200, Daniel Lezcano wrote:
> The NXP Automotive platform s32g2 and s32g3 have on their board a
> FlexTimer (FTM) dedicated for the PWM. The same IP is found on the
> Freescale Vybrid Family and the i.MX8 SoCs. However, there is a small
> difference with some registers not available on the s32g2/3 and 6
> channels instead of 8.
>
> These two patches provide the DT bindings for the s32g2/3 compatible
> strings and the code to deal with the FTM difference.
>
> Changelog:
> v3:
> - Fixed dt-bindings subject prefix
> v2:
> - Merged the two booleans for the regmap holes check
> - Clarified why this is needed in the changelog
> v1:
> - Initial post
>
> Daniel Lezcano (1):
> dt-bindings: pwm: fsl,vf610-ftm-pwm: Add compatible for s32g2 and
> s32g3
>
> Ghennadi Procopciuc (1):
> pwm: Add the S32G support in the Freescale FTM driver
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git pwm/for-next
with this merge conflict resolution:
diff --cc drivers/pwm/pwm-fsl-ftm.c
index 6683931872fc,e0069dbdb02d..000000000000
--- a/drivers/pwm/pwm-fsl-ftm.c
+++ b/drivers/pwm/pwm-fsl-ftm.c
@@@ -396,7 -428,9 +416,7 @@@ static int fsl_pwm_probe(struct platfor
return PTR_ERR(chip);
fpc = to_fsl_chip(chip);
- mutex_init(&fpc->lock);
-
- fpc->soc = of_device_get_match_data(&pdev->dev);
+ fpc->soc = soc;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
The pro tip here to make your upstream maintainer lucky is to work on
their tree or next or at least the latest development release and make
use of `git format-patch --base`.
Best regards
Uwe
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists